From: "Mika Båtsman" <mika.batsman@gmail.com>
To: Marko Ristola <marko.ristola@kolumbus.fi>
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] TerraTec Cinergy C DVB-C / Twinhan AD-CP400 (VP-2040) & mantis driver
Date: Tue, 05 Aug 2008 11:41:41 +0300 [thread overview]
Message-ID: <48981245.2050900@gmail.com> (raw)
In-Reply-To: <489766A4.7070907@kolumbus.fi>
Marko Ristola wrote:
> Mika Båtsman kirjoitti:
>> Hi,
>> I also tried your patch because I've had freezes since I got these
>> cards. Unfortunately it didn't help me. Got a whooping 5min uptime
>> before it all went wrong again. I have 2x Cinergy C + 2.6.24-19 + vdr
>> 1.6.
>>
> Do you have a heat problem? Have you checked your motherboard sensors?
> Have you checked that your memory is okay? Air flows easilly?
Memory was the first thing I suspected but memtest went through 10+
times without a fail. Heat shouldn't be a problem either. There's a big
efficient, noisy fan in the back of the case.
The machine works fine when dvb is watched with dvbyell
http://www.dvbyell.org/ which has cards set to fixed frequency ie. card1
-> 152Mhz and card2 -> 290Mhz. At least for me the problem occurs only
with apps like mythtv and vdr which change the frequency of the tuner.
-Mika
>> I did:
>> hg clone http://jusst.de/hg/mantis
>> replaced mantis_dma.c with the one you attached, renamed
>> MANTIS_GPIF_RDWRN -> MANTIS_GPIF_HIFRDWRN
>> make && make install && reboot
>>
>> Am I missing something? It seemed to compile and install fine.
>>
>> You said that the mantis_dma.c in jusst.de mantis head is not the
>> latest version. Where can it be found then?
> I have my own driver version which I have given for Finnish people for
> easy installation with remote control support for Twinhan 2033.
> (Personally I'm not pleased with the card: now after some years of
> development the card works well enough for me finally).
>
> So the most important feature of my driver for Finnish people has been
> the easy compile and install and that the driver ("release") is tested
> for Twinhan 2033.
> Secondly I have given for some Finnish people the Twinhan 2033 remote
> control support included.
> Maybe somebody from Finland would be interested with the DMA transfer
> fixes, if they have unsolved quality problems. That's a fact that those
> tweaks helped me although the root cause is a bit uncertain. Other
> features of my driver version like suspend/resume aren't very important.
>
> Regards,
> Marko Ristola
>
>>
>> Regards,
>> Mika Båtsman
>>
>> Marko Ristola wrote:
>>>
>>> Hi,
>>>
>>> Unfortunately I have been busy.
>>>
>>> The patch you tried was against jusst.de Mantis Mercurial branch head.
>>> Your version of mantis_dma.c is not the latest version and thus the
>>> patch didn't
>>> apply cleanly.
>>>
>>> Here is the version that I use currently. It doesn't compile straight
>>> against jusst.de/mantis head.
>>> It might work for you because MANTIS_GPIF_RDWRN is not renamed as
>>> MANTIS_GPIF_HIFRDWRN.
>>>
>>> If it doesn't compile please rename MANTIS_GPIF_RDWRN occurrences
>>> into MANTIS_GPIF_HIFRDWRN on that file.
>>> Otherwise the file should work as it is.
>>>
>>> Best regards,
>>> Marko Ristola
>>>
>>> Leif Oberste-Berghaus kirjoitti:
>>>> Hi Marko,
>>>>
>>>> I tried to patch the driver but I'm getting an error message:
>>>>
>>>> root@mediapc:/usr/local/src/test/mantis-0b04be0c088a# patch -p1 <
>>>> mantis_dma.c.aligned_dma_trs.patch
>>>> patching file linux/drivers/media/dvb/mantis/mantis_dma.c
>>>> patch: **** malformed patch at line 22: int mantis_dma_exit(struct
>>>> mantis_pci *mantis)
>>>>
>>>> Any ideas?
>>>>
>>>> Regards
>>>> Leif
>>>>
>>>>
>>>> Am 14.07.2008 um 22:05 schrieb Marko Ristola:
>>>>
>>>>> Hi Leif,
>>>>>
>>>>> Here is a patch that implements the mentioned DMA transfer
>>>>> improvements.
>>>>> I hope that these contain also the needed fix for you.
>>>>> You can apply it into jusst.de/mantis Mercurial branch.
>>>>> It modifies linux/drivers/media/dvb/mantis/mantis_dma.c only.
>>>>> I have compiled the patch against 2.6.25.9-76.fc9.x86_64.
>>>>>
>>>>> cd mantis
>>>>> patch -p1 < mantis_dma.c.aligned_dma_trs.patch
>>>>>
>>>>> Please tell us whether my patch helps you or not: if it helps, some
>>>>> of my patch might get into jusst.de as
>>>>> a fix for your problem.
>>>>>
>>>>> Best Regards,
>>>>> Marko
>>>>
>>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> linux-dvb mailing list
>>> linux-dvb@linuxtv.org
>>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>>
>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next prev parent reply other threads:[~2008-08-05 8:41 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-10 20:42 [linux-dvb] TerraTec Cinergy C DVB-C / Twinhan AD-CP400 (VP-2040) & mantis driver Leif Oberste-Berghaus
2008-07-13 12:50 ` Marko Ristola
2008-07-13 20:49 ` Leif Oberste-Berghaus
2008-07-14 20:05 ` Marko Ristola
[not found] ` <D5C41D41-A72D-4603-9AD1-67A8C5E73289@oberste-berghaus.de>
2008-07-27 17:20 ` Marko Ristola
2008-07-29 12:30 ` Mika Båtsman
2008-08-04 20:29 ` Marko Ristola
2008-08-05 8:41 ` Mika Båtsman [this message]
2008-08-05 17:41 ` Marko Ristola
2008-08-06 6:52 ` Mika Båtsman
2008-08-06 19:54 ` Marko Ristola
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48981245.2050900@gmail.com \
--to=mika.batsman@gmail.com \
--cc=linux-dvb@linuxtv.org \
--cc=marko.ristola@kolumbus.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox