Re: [linux-dvb] HVR-1800 firmware error

[Barry Quiel <quielb@ecst.csuchico.edu>]

Barry Quiel wrote:
> I seem to be getting some firmware errors on my HVR-1800.  From syslog:
> 
> Jul 22 20:19:36 myth-mbe kernel: Firmware and/or mailbox pointer not 
> initialized or corrupted, signature = 0xffffffff, cmd = SET_OUTPUT_PORT
> Jul 22 20:19:36 myth-mbe kernel: Firmware and/or mailbox pointer not 
> initialized or corrupted, signature = 0xffffffff, cmd = SET_OUTPUT_PORT
> Jul 22 20:19:36 myth-mbe kernel: Firmware and/or mailbox pointer not 
> initialized or corrupted, signature = 0xffffffff, cmd = SET_OUTPUT_PORT
> Jul 22 20:19:36 myth-mbe kernel: Firmware and/or mailbox pointer not 
> initialized or corrupted, signature = 0xffffffff, cmd = SET_OUTPUT_PORT
> Jul 22 20:19:36 myth-mbe kernel: Firmware and/or mailbox pointer not 
> initialized or corrupted, signature = 0xffffffff, cmd = SET_AUDIO_PROPERTIES
> Jul 22 20:19:36 myth-mbe kernel: Firmware and/or mailbox pointer not 
> initialized or corrupted, signature = 0xffffffff, cmd = SET_OUTPUT_PORT
> Jul 22 20:19:36 myth-mbe kernel: Firmware and/or mailbox pointer not 
> initialized or corrupted, signature = 0xffffffff, cmd = SET_BIT_RATE
> Jul 22 20:19:36 myth-mbe kernel: Firmware and/or mailbox pointer not 
> initialized or corrupted, signature = 0xffffffff, cmd = SET_OUTPUT_PORT
> Jul 22 20:19:36 myth-mbe kernel: Firmware and/or mailbox pointer not 
> initialized or corrupted, signature = 0xffffffff, cmd = SET_BIT_RATE
> Jul 22 20:19:36 myth-mbe kernel: Firmware and/or mailbox pointer not 
> initialized or corrupted, signature = 0xffffffff, cmd = SET_OUTPUT_PORT
> Jul 22 20:19:37 myth-mbe kernel: Firmware and/or mailbox pointer not 
> initialized or corrupted, signature = 0xffffffff, cmd = PING_FW
> 
> The errors show up if I try to use the card in MythTV, or do a cat 
> /dev/video1.  The capture file has no picture, but there is a bit of 
> sound, but lots of static.
> 
> I just downloaded the latest dvb tree, so that's up to date.  My kernel 
> is 2.6.25.9-76.fc9.x86_64.  I also refreshed the firmware from 
> http://steventoth.net/linux/hvr1800 to be sure the files weren't corrupt.
> 

I've been doing a bit more testing and seems that the HVR-1800 doesn't 
play well with the PVR-500.  That's not to say that I've been able to 
get the 1800 analog piece to work, but it does behave better when I take 
the 500 out of the box.  I don't get the firmware errors when the 500 is 
out.  I still don't get any video or audio on the 1800 though.  It acts 
like there is no cable connected, just static.

Any suggestions?



_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb