From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Message-ID: <489AA9AF.2060803@iinet.net.au> Date: Thu, 07 Aug 2008 15:52:15 +0800 From: Tim Farrington MIME-Version: 1.0 To: David References: <20080801034025.C0EC947808F@ws1-5.us4.outblaze.com><4897AC24.3040006@linuxtv.org> <20080805214339.GA7314@kryten><20080805234129.GD11008@brainz.yelavich.home> <4899020C.50000@linuxtv.org> <41A3723BDBA947399F2CBD960E4AFB94@mce> <48996623.4010703@iinet.net.au> <0BBC9497950E4ECA878D1D018B090B61@mce> <489A7B4A.4080206@iinet.net.au> <489A9D74.5090501@iinet.net.au> <42DDE4283DB94F2580D473D5B1954CB5@mce> In-Reply-To: <42DDE4283DB94F2580D473D5B1954CB5@mce> Cc: patrick.claven@manildra.com.au, linux-dvb@linuxtv.org Subject: Re: [linux-dvb] [PATCH] Add initial support for DViCO FusionHDTV DVB-T Dual Express List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: The point is that the developers are trying to incorporate Chris's work into the main v4l-dvb driver. Chris's original firmware requirements were: dvb-usb-bluebird-01.fw xc3028-dvico-au-01.fw dvb-usb-bluebird-02.fw whereas now it needs: xc3028-v27.fw It seems that the "new" firmware doesn't work as of yet for Australia, for this device. IIRC, Chris had an "offset" for Australia. Regards, Timf _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb