Re: [linux-dvb] A/V sync issues with DVB-S

[Simon Kenyon <simon@koala.ie>]

Steven Toth wrote:
> Antti Palosaari wrote:
>   
>> Thomas Börkel wrote:
>>     
>>> hermann pitton wrote:
>>> Measuring the strength and SNR is not so easy now. My SAT receiver
>>> always says strength 70% and SNR 80%. My new Nova S Plus cards always
>>> report strength 97% and SNR 99%. Only my TT 1500s reported reasonable
>>> numbers like strength 63-80% and SNR 75-90%.
>>>       
>> What is the recommended way to report signal strength or SNR by the 
>> driver? Both of those are 16bit unsigned value. Is it better to scale 
>> 0-0xffff or return as decibels? If SNR is reported as decibels it will 
>> look like very small value...
>>
>> Antti
>>     
>
> May of the drivers I've added recently report their values in db, but I 
> typically also have one precision point. So I report 20.4 as 204 decimal.
>
> - Steve
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
would it be possible to define a standard and then normalise the results 
to that range.
i realise that it might take a year or more before all drivers adopted 
this "standard".
but it would be worth it to at least declare one.

i see this sort of discussion on this list at least once a fortnight.
i also want to build a signal strength meter for a dish installation 
tool i'm trying to write
--
simon

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb