[linux-dvb] Twinhan VP-3030 Mantis card help

[linux-dvb] Twinhan VP-3030 Mantis card help

[Carl Oscar Ejwertz]

Hi!

I have this Twinhan dvb-t VP-3030 Mantis card that im trying to get to 
work with Linux.
I have compiled the drivers from I dl with hg clone 
http://*jusst*.de/hg/mantis <http://jusst.de/hg/mantis>
and did a make install.

I do get some success with it that it creates some of the devices in the 
/dev/dvb/adapter0 get created like
ca0, demux0, dvr0 and net0 - but no frontend0 is created and I suspect 
that is the problem since when I do a
dvbscan it says "Failed to open frontend"

dmesg | grep mantis
[   46.115937] mantis_alloc_buffers (0): DMA=0x1f490000 cpu=0xdf490000 
size=65536
[   46.115943] mantis_alloc_buffers (0): RISC=0x1e5a3000 cpu=0xde5a3000 
size=1000
[   46.632033] mantis_ca_init (0): Registering EN50221 device
[   46.667981] mantis_ca_init (0): Registered EN50221 device
[   46.667991] mantis_hif_init (0): Adapter(0) Initializing Mantis Host 
Interface


lspci -vvvnn
01:06.0 Multimedia controller [0480]: Twinhan Technology Co. Ltd Mantis 
DTV PCI Bridge Controller [Ver 1.0] [1822:4e35] (rev 01)
    Subsystem: Twinhan Technology Co. Ltd Unknown device [1822:0024]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
    Latency: 32 (2000ns min, 63750ns max)
    Interrupt: pin A routed to IRQ 20
    Region 0: Memory at ea000000 (32-bit, prefetchable) [size=4K]

So any pointer to getting this card to work under my ubuntu would be great!



_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[linux-dvb] Twinhan VP-3030 Mantis card help

[Carl Oscar Ejwertz]

Hi!

I have this Twinhan dvb-t VP-3030 Mantis card that im trying to get to
work with Linux.
I have compiled the drivers from I dl with hg clone
http://*jusst*.de/hg/mantis <http://jusst.de/hg/mantis>
and did a make install.

I do get some success with it that it creates some of the devices in the
/dev/dvb/adapter0 get created like
ca0, demux0, dvr0 and net0 - but no frontend0 is created and I suspect
that is the problem since when I do a
dvbscan it says "Failed to open frontend"

dmesg | grep mantis
[   46.115937] mantis_alloc_buffers (0): DMA=0x1f490000 cpu=0xdf490000
size=65536
[   46.115943] mantis_alloc_buffers (0): RISC=0x1e5a3000 cpu=0xde5a3000
size=1000
[   46.632033] mantis_ca_init (0): Registering EN50221 device
[   46.667981] mantis_ca_init (0): Registered EN50221 device
[   46.667991] mantis_hif_init (0): Adapter(0) Initializing Mantis Host
Interface


lspci -vvvnn
01:06.0 Multimedia controller [0480]: Twinhan Technology Co. Ltd Mantis
DTV PCI Bridge Controller [Ver 1.0] [1822:4e35] (rev 01)
    Subsystem: Twinhan Technology Co. Ltd Unknown device [1822:0024]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
    Latency: 32 (2000ns min, 63750ns max)
    Interrupt: pin A routed to IRQ 20
    Region 0: Memory at ea000000 (32-bit, prefetchable) [size=4K]

So any pointer to getting this card to work under my ubuntu would be great!




_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb