Re: [linux-dvb] VP 1041 CAM: dvb_ca adapter 0: Invalid PC card inserted‏

From: Clemens Sutor <csutor@gmx.de>
To: Fredrik Jonson <fjonson95@hotmail.com>
Cc: Stefan Ellenberger <stefan_ell@hotmail.com>, linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] VP 1041 CAM: dvb_ca adapter 0: Invalid PC card inserted‏
Date: Sat, 20 Sep 2008 00:47:23 +0200	[thread overview]
Message-ID: <48D42BFB.2000708@gmx.de> (raw)
In-Reply-To: <48D41A1E.1040604@gmx.de>

Clemens Sutor schrieb:
> Fredrik Jonson schrieb:
>   
>> Hello
>>
>> I have the same problem but with VP-1034 se my post [linux-dvb] 
>> VP-1034 and CI 
>> <http://www.linuxtv.org/pipermail/linux-dvb/2008-September/028860.html>
>>
>> /fjonson
>> ‏ <http://www.linuxtv.org/pipermail/linux-dvb/2008-September/028860.html>
>>
>>     
>>> From: stefan_ell@hotmail.com
>>> To: linux-dvb@linuxtv.org
>>> Date: Fri, 19 Sep 2008 12:41:32 +0200
>>> Subject: [linux-dvb] VP 1041 CAM: dvb_ca adapter 0: Invalid PC card 
>>>       
>> inserted‏
>>     
>>> Hi list
>>>
>>> If I attach the Common Interface to the card (Twinhan VP 1041) and 
>>>       
>> reload the mantis modules dmesg output is the following:
>>     
>>> [ 6979.969526] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC2] -> 
>>>       
>> GSI 17 (level, low) -> IRQ 21
>>     
>>> [ 6979.969562] irq: 21, latency: 32
>>> [ 6979.969566] memory: 0xd5100000, mmio: 0xf8c1c000
>>> [ 6979.969573] found a VP-1041 PCI DSS/DVB-S/DVB-S2 device on (01:06.0),
>>> [ 6979.969576] Mantis Rev 1 [1822:0031], irq: 21, latency: 32
>>> [ 6979.969579] memory: 0xd5100000, mmio: 0xf8c1c000
>>> [ 6979.972276] MAC Address=[00:08:ca:1c:3f:4c]
>>> [ 6979.972312] mantis_alloc_buffers (0): DMA=0x2ef10000 
>>>       
>> cpu=0xeef10000 size=65536
>>     
>>> [ 6979.972319] mantis_alloc_buffers (0): RISC=0x13ddc000 
>>>       
>> cpu=0xd3ddc000 size=1000
>>     
>>> [ 6979.972323] DVB: registering new adapter (Mantis dvb adapter)
>>> [ 6980.520344] stb0899_attach: Attaching STB0899
>>> [ 6980.520353] mantis_frontend_init (0): found STB0899 DVB-S/DVB-S2 
>>>       
>> frontend @0x68
>>     
>>> [ 6980.520362] stb6100_attach: Attaching STB6100
>>> [ 6980.520715] DVB: registering frontend 0 (STB0899 Multistandard)...
>>> [ 6980.520778] mantis_ca_init (0): Registering EN50221 device
>>> [ 6980.522811] mantis_ca_init (0): Registered EN50221 device
>>> [ 6980.522825] mantis_hif_init (0): Adapter(0) Initializing Mantis 
>>>       
>> Host Interface
>>     
>>> [ 6981.528828] dvb_ca adapter 0: Invalid PC card inserted :(
>>>
>>> Since it is the official Viaccess "red cam" (Rev 1.0) I don't 
>>>       
>> understand the problem - this one worked just fine in any STB I ever 
>> used - I know I might have to update the CAMs firmware if I want to 
>> watch HD content, but nevertheless: shouldn't this work for any non HD 
>> content as it does on my STB?
>>     
>>> Anyone has issues with the same CAM Revision and mantis cards?
>>> _________________________________________________________________
>>>       
>
> Hello,
>
> as far as I know, the whole mantis driver tree has no working CI/CAM 
> support yet. For sure I know this for the mantis 2033 and 2040 based 
> cards and in in the source code the CI/CAM support is implemented the 
> same way for all mantis based cards.
>
> The descriped problem is known, but now solved. A lot of the CI support 
> is working allready, but the driver is still not finished and stable. 
> The mantainer of the mantis tree told in the mailing list here, that the 
> problem is not easy to find and he contacted the vendor to get some more 
> technical details. So we have to be patient until there is a working 
> solution.
>
> Bye
> Clemens
>   
Sorry, typo, not "now solved" "NOT solved" :)

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb