From: Jonathan Coles <jcoles0727@rogers.com>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] Still unclear how to use Hauppage HVR-950 and v4l-dvb
Date: Sun, 21 Sep 2008 10:22:55 -0400 [thread overview]
Message-ID: <48D658BF.7040807@rogers.com> (raw)
It would really help if there was a single set of instructions specific
to the HVR-950 with tests at each stage. I'm really confused as to the
status of my installation.
I compiled the firmware according to the instructions on
http://linuxtv.org/repo/. The result:
$ lsusb
Bus 005 Device 002: ID 2040:7200 Hauppauge
On the other hand, dmesg reports:
[ 17.247610] usb 5-2: new high speed USB device using ehci_hcd and
address 2
[ 17.380387] usb 5-2: unable to read config index 0 descriptor/all
[ 17.380434] usb 5-2: can't read configurations, error -71
Is my firmware is properly installed or not?
I'm trying to follow the instructions on your
*How_to_install_DVB_device_drivers* wiki, but some vital details are
missing. Which modules do I look for in lsmod? The
Hauppauge_Computer_Works Wiki doesn't provide this information for the
HVR-950. The instructions at
http://u32.net/MythTV/WinTV-HVR-950/index.html indicate that the
required modules are either em28xx or au0828 and au8522. I have
modprobe'd these, but still have nothing in /dev/dvb.
Any ideas as to what I am missing or how I can troubleshoot this?
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next reply other threads:[~2008-09-21 14:23 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-21 14:22 Jonathan Coles [this message]
2008-09-21 14:30 ` [linux-dvb] Still unclear how to use Hauppage HVR-950 and v4l-dvb Devin Heitmueller
2008-09-21 14:46 ` Michael Krufky
2008-09-21 15:44 ` Jonathan Coles
2008-09-21 16:11 ` Michael Krufky
2008-09-21 17:03 ` Steven Toth
2008-09-21 17:17 ` Jonathan Coles
2008-09-21 15:52 ` BOUWSMA Barry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48D658BF.7040807@rogers.com \
--to=jcoles0727@rogers.com \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox