* [linux-dvb] tda1004x+saa7162+ PCTV 7010ix @ 2008-09-25 15:13 Wieslaw Kierbedz 2008-09-26 7:41 ` Wieslaw Kierbedz 0 siblings, 1 reply; 3+ messages in thread From: Wieslaw Kierbedz @ 2008-09-25 15:13 UTC (permalink / raw) To: linux-dvb Hi. I found, that Twinhan 6090 and my Pinnacle PCTV 7010ix have same components. First I added definitions to Manu's driver. saa716x_hybrid loaded successfully, udev created devices. Now the questions. How to check does it works without frontend? Is tda1004x just usable? I compiled and loaded it but it ignored my card. Then, how to force tda1004x to load firmware, check devices and create device file? I know, both drivers saa716x and tda1004x are very experimental. But simply wait is a little to hard for me. P.S. Extremaly lame. Don't shoot please. -- WK ---------------------------------------------------------------------- Znajdź mieszkanie w Twoim regionie! kliknij >>> http://link.interia.pl/f1f19 _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [linux-dvb] tda1004x+saa7162+ PCTV 7010ix 2008-09-25 15:13 [linux-dvb] tda1004x+saa7162+ PCTV 7010ix Wieslaw Kierbedz @ 2008-09-26 7:41 ` Wieslaw Kierbedz 2008-09-26 17:07 ` [linux-dvb] Common carrier_width Igor M. Liplianin 0 siblings, 1 reply; 3+ messages in thread From: Wieslaw Kierbedz @ 2008-09-26 7:41 UTC (permalink / raw) To: linux-dvb Wieslaw Kierbedz wrote: > Is tda1004x just usable? > I compiled and loaded it but it ignored my card. > Then, how to force tda1004x to load firmware, check devices and create > device file? I suppose I found. There is only demodulator definition for saa716x_averhc82_zl10353. To enable others I have to write saa716x_7010ix_tda1004x_config (for example) code? Has that some sens to adjust functions from other drivers? saa7134-dvb td1316? -- WK ---------------------------------------------------------------------- Znajdź mieszkanie w Twoim regionie! kliknij >>> http://link.interia.pl/f1f19 _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ^ permalink raw reply [flat|nested] 3+ messages in thread
* [linux-dvb] Common carrier_width 2008-09-26 7:41 ` Wieslaw Kierbedz @ 2008-09-26 17:07 ` Igor M. Liplianin 0 siblings, 0 replies; 3+ messages in thread From: Igor M. Liplianin @ 2008-09-26 17:07 UTC (permalink / raw) To: linux-dvb Would it be a common thing to implement calculation of carrier width? static u32 carrier_width(u32 symbol_rate, fe_rolloff_t rolloff) { u32 rlf; switch(rolloff) { case ROLLOFF_20: rlf = 20; break; case ROLLOFF_25: rlf = 25; break; default: rlf = 35; break; } return (symbol_rate + (symbol_rate * rlf) / 100); } Igor _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-09-26 17:07 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2008-09-25 15:13 [linux-dvb] tda1004x+saa7162+ PCTV 7010ix Wieslaw Kierbedz 2008-09-26 7:41 ` Wieslaw Kierbedz 2008-09-26 17:07 ` [linux-dvb] Common carrier_width Igor M. Liplianin
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox