* [linux-dvb] [PATCH] saa7134: add support for Tv(working config), radio and analog audio in on the Hauppauge HVR-1110
@ 2008-09-26 22:13 dabby bentam
2008-09-27 4:39 ` hermann pitton
0 siblings, 1 reply; 5+ messages in thread
From: dabby bentam @ 2008-09-26 22:13 UTC (permalink / raw)
To: video4linux-list, linux-dvb
[-- Attachment #1: Type: text/plain, Size: 3906 bytes --]
This patch fixes the Analog TV tuning issue and adds support of the Radio feature.
It resolves the S-Video and Composite Audio In - FIXME (sound redirect still required via sox etc)
[ 30.263288] saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]
[ 30.263297] saa7133[0]: board init: gpio is 6400000
[ 30.384637] input: HVR 1110 as /devices/virtual/input/input6
[ 30.427939] ir-kbd-i2c: HVR 1110 detected at i2c-2/2-0071/ir0 [saa7133[0]]
[ 30.474512] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 30.474521] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[ 30.474527] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
[ 30.474532] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 30.474537] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
[ 30.474542] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.474547] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.474552] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.474557] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 b0 16 35 f0 73 05 29 00
[ 30.474562] saa7133[0]: i2c eeprom 90: 84 08 00 06 cb 05 01 00 94 48 89 72 07 70 73 09
[ 30.474568] saa7133[0]: i2c eeprom a0: 23 5f 73 0a fc 72 72 0b 2f 72 0e 01 72 0f 03 72
[ 30.474573] saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 79 43 00 00 00 00 00 00 00 00 00
[ 30.474578] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.474583] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.474588] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.474593] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.474602] tveeprom 2-0050: Hauppauge model 67019, rev B4B4, serial# 3479216
[ 30.474605] tveeprom 2-0050: MAC address is 00-0D-FE-35-16-B0
[ 30.474607] tveeprom 2-0050: tuner model is Philips 8275A (idx 114, type 4)
[ 30.474609] tveeprom 2-0050: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[ 30.474612] tveeprom 2-0050: audio processor is SAA7131 (idx 41)
[ 30.474614] tveeprom 2-0050: decoder processor is SAA7131 (idx 35)
[ 30.474616] tveeprom 2-0050: has radio, has IR receiver, has IR transmitter
[ 30.474618] saa7133[0]: hauppauge eeprom: model=67019
[ 31.047409] tuner 2-004b: chip found @ 0x96 (saa7133[0])
[ 31.090707] tda8290 2-004b: setting tuner address to 61
[ 31.183556] tuner 2-004b: type set to tda8290+75a
[ 31.226853] tda8290 2-004b: setting tuner address to 61
[ 31.320122] tuner 2-004b: type set to tda8290+75a
[ 31.322302] saa7133[0]: registered device video0 [v4l2]
[ 31.322321] saa7133[0]: registered device vbi0
[ 31.322336] saa7133[0]: registered device radio0
[ 31.323774] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 31.323777] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22
[ 31.323995] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 31.556834] saa7134 ALSA driver for DMA sound loaded
[ 31.556868] saa7133[0]/alsa: saa7133[0] at 0xfb010000 irq 16 registered as card -2
[ 32.040025] DVB: registering new adapter (saa7133[0])
[ 32.040031] DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
[ 32.099943] tda1004x: setting up plls for 48MHz sampling clock
[ 32.356492] tda1004x: found firmware revision 20 -- ok
Signed-off-by: dabby bentam
_________________________________________________________________
Get all your favourite content with the slick new MSN Toolbar - FREE
http://clk.atdmt.com/UKM/go/111354027/direct/01/
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: hvr-1110.patch --]
[-- Type: text/x-diff, Size: 1562 bytes --]
diff -r aa3e5cc1d833 linux/drivers/media/video/saa7134/saa7134-cards.c
--- a/linux/drivers/media/video/saa7134/saa7134-cards.c Wed Sep 24 10:00:37 2008 +0200
+++ b/linux/drivers/media/video/saa7134/saa7134-cards.c Fri Sep 26 22:31:08 2008 +0100
@@ -3299,6 +3299,7 @@
},
[SAA7134_BOARD_HAUPPAUGE_HVR1110] = {
/* Thomas Genty <tomlohave@gmail.com> */
+ /* David Bentham <db260179@hotmail.com> */
.name = "Hauppauge WinTV-HVR1110 DVB-T/Hybrid",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
@@ -3307,23 +3308,26 @@
.radio_addr = ADDR_UNSET,
.tuner_config = 1,
.mpeg = SAA7134_MPEG_DVB,
- .inputs = {{
- .name = name_tv,
- .vmux = 1,
- .amux = TV,
- .tv = 1,
- },{
- .name = name_comp1,
- .vmux = 3,
- .amux = LINE2, /* FIXME: audio doesn't work on svideo/composite */
- },{
- .name = name_svideo,
- .vmux = 8,
- .amux = LINE2, /* FIXME: audio doesn't work on svideo/composite */
- }},
- .radio = {
- .name = name_radio,
- .amux = TV,
+ .gpiomask = 0x0200100,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ .gpio = 0x0000100,
+ }, {
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = LINE1,
+ }, {
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE1,
+ } },
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ .gpio = 0x0200100,
},
},
[SAA7134_BOARD_CINERGY_HT_PCMCIA] = {
[-- Attachment #3: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [linux-dvb] [PATCH] saa7134: add support for Tv(working config), radio and analog audio in on the Hauppauge HVR-1110
2008-09-26 22:13 [linux-dvb] [PATCH] saa7134: add support for Tv(working config), radio and analog audio in on the Hauppauge HVR-1110 dabby bentam
@ 2008-09-27 4:39 ` hermann pitton
2008-09-28 4:43 ` Mauro Carvalho Chehab
0 siblings, 1 reply; 5+ messages in thread
From: hermann pitton @ 2008-09-27 4:39 UTC (permalink / raw)
To: dabby bentam, Mauro Carvalho Chehab; +Cc: video4linux-list, linux-dvb
[-- Attachment #1: Type: text/plain, Size: 4035 bytes --]
Am Freitag, den 26.09.2008, 22:13 +0000 schrieb dabby bentam:
> This patch fixes the Analog TV tuning issue and adds support of the Radio feature.
>
> It resolves the S-Video and Composite Audio In - FIXME (sound redirect still required via sox etc)
>
> [ 30.263288] saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]
> [ 30.263297] saa7133[0]: board init: gpio is 6400000
> [ 30.384637] input: HVR 1110 as /devices/virtual/input/input6
> [ 30.427939] ir-kbd-i2c: HVR 1110 detected at i2c-2/2-0071/ir0 [saa7133[0]]
> [ 30.474512] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
> [ 30.474521] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
> [ 30.474527] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
> [ 30.474532] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> [ 30.474537] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
> [ 30.474542] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [ 30.474547] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [ 30.474552] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [ 30.474557] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 b0 16 35 f0 73 05 29 00
> [ 30.474562] saa7133[0]: i2c eeprom 90: 84 08 00 06 cb 05 01 00 94 48 89 72 07 70 73 09
> [ 30.474568] saa7133[0]: i2c eeprom a0: 23 5f 73 0a fc 72 72 0b 2f 72 0e 01 72 0f 03 72
> [ 30.474573] saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 79 43 00 00 00 00 00 00 00 00 00
> [ 30.474578] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [ 30.474583] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [ 30.474588] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [ 30.474593] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [ 30.474602] tveeprom 2-0050: Hauppauge model 67019, rev B4B4, serial# 3479216
> [ 30.474605] tveeprom 2-0050: MAC address is 00-0D-FE-35-16-B0
> [ 30.474607] tveeprom 2-0050: tuner model is Philips 8275A (idx 114, type 4)
> [ 30.474609] tveeprom 2-0050: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
> [ 30.474612] tveeprom 2-0050: audio processor is SAA7131 (idx 41)
> [ 30.474614] tveeprom 2-0050: decoder processor is SAA7131 (idx 35)
> [ 30.474616] tveeprom 2-0050: has radio, has IR receiver, has IR transmitter
> [ 30.474618] saa7133[0]: hauppauge eeprom: model=67019
> [ 31.047409] tuner 2-004b: chip found @ 0x96 (saa7133[0])
> [ 31.090707] tda8290 2-004b: setting tuner address to 61
> [ 31.183556] tuner 2-004b: type set to tda8290+75a
> [ 31.226853] tda8290 2-004b: setting tuner address to 61
> [ 31.320122] tuner 2-004b: type set to tda8290+75a
> [ 31.322302] saa7133[0]: registered device video0 [v4l2]
> [ 31.322321] saa7133[0]: registered device vbi0
> [ 31.322336] saa7133[0]: registered device radio0
> [ 31.323774] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
> [ 31.323777] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22
> [ 31.323995] PCI: Setting latency timer of device 0000:00:05.0 to 64
> [ 31.556834] saa7134 ALSA driver for DMA sound loaded
> [ 31.556868] saa7133[0]/alsa: saa7133[0] at 0xfb010000 irq 16 registered as card -2
> [ 32.040025] DVB: registering new adapter (saa7133[0])
> [ 32.040031] DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
> [ 32.099943] tda1004x: setting up plls for 48MHz sampling clock
> [ 32.356492] tda1004x: found firmware revision 20 -- ok
>
>
> Signed-off-by: dabby bentam
Mauro,
wait a little.
We likely will have a tested-by from Thomas, the original contributor of
that card, soon too.
So far.
Reviewed-by: Hermann Pitton <hermann-pitton@arcor.de>
Cheers,
Hermann
[-- Attachment #2: hvr-1110-out.patch --]
[-- Type: text/x-patch, Size: 1562 bytes --]
diff -r aa3e5cc1d833 linux/drivers/media/video/saa7134/saa7134-cards.c
--- a/linux/drivers/media/video/saa7134/saa7134-cards.c Wed Sep 24 10:00:37 2008 +0200
+++ b/linux/drivers/media/video/saa7134/saa7134-cards.c Fri Sep 26 22:31:08 2008 +0100
@@ -3299,6 +3299,7 @@
},
[SAA7134_BOARD_HAUPPAUGE_HVR1110] = {
/* Thomas Genty <tomlohave@gmail.com> */
+ /* David Bentham <db260179@hotmail.com> */
.name = "Hauppauge WinTV-HVR1110 DVB-T/Hybrid",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
@@ -3307,23 +3308,26 @@
.radio_addr = ADDR_UNSET,
.tuner_config = 1,
.mpeg = SAA7134_MPEG_DVB,
- .inputs = {{
- .name = name_tv,
- .vmux = 1,
- .amux = TV,
- .tv = 1,
- },{
- .name = name_comp1,
- .vmux = 3,
- .amux = LINE2, /* FIXME: audio doesn't work on svideo/composite */
- },{
- .name = name_svideo,
- .vmux = 8,
- .amux = LINE2, /* FIXME: audio doesn't work on svideo/composite */
- }},
- .radio = {
- .name = name_radio,
- .amux = TV,
+ .gpiomask = 0x0200100,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ .gpio = 0x0000100,
+ }, {
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = LINE1,
+ }, {
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE1,
+ } },
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ .gpio = 0x0200100,
},
},
[SAA7134_BOARD_CINERGY_HT_PCMCIA] = {
[-- Attachment #3: Type: text/plain, Size: 164 bytes --]
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [linux-dvb] [PATCH] saa7134: add support for Tv(working config), radio and analog audio in on the Hauppauge HVR-1110
2008-09-27 4:39 ` hermann pitton
@ 2008-09-28 4:43 ` Mauro Carvalho Chehab
2008-09-28 16:29 ` hermann pitton
0 siblings, 1 reply; 5+ messages in thread
From: Mauro Carvalho Chehab @ 2008-09-28 4:43 UTC (permalink / raw)
To: hermann pitton; +Cc: dabby bentam, linux-dvb, video4linux-list
On Sat, 27 Sep 2008 06:39:54 +0200
hermann pitton <hermann-pitton@arcor.de> wrote:
> Mauro,
>
> wait a little.
OK. Please forward it to me again, after everything being ok with the patch.
Cheers,
Mauro
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [linux-dvb] [PATCH] saa7134: add support for Tv(working config), radio and analog audio in on the Hauppauge HVR-1110
2008-09-28 4:43 ` Mauro Carvalho Chehab
@ 2008-09-28 16:29 ` hermann pitton
2008-09-28 17:35 ` tomlohave
0 siblings, 1 reply; 5+ messages in thread
From: hermann pitton @ 2008-09-28 16:29 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Thomas Genty, dabby bentam
Cc: video4linux-list, linux-dvb
[-- Attachment #1: Type: text/plain, Size: 2540 bytes --]
Hi,
Am Sonntag, den 28.09.2008, 01:43 -0300 schrieb Mauro Carvalho Chehab:
> On Sat, 27 Sep 2008 06:39:54 +0200
> hermann pitton <hermann-pitton@arcor.de> wrote:
>
> > Mauro,
> >
> > wait a little.
>
> OK. Please forward it to me again, after everything being ok with the patch.
>
> Cheers,
> Mauro
Thomas mailed me that he has some trouble with his current setup and
might not be able to test that soon too.
The patch is already OK and tested by David.
David,
as told, we need also your email in signed-off-by.
I take it from the card's entry. Please give your OK.
Here is it again with some cleanup for spaces.
Mauro, please take it from the attachment.
Evolution inline converts tabs to spaces or I must force it into a mode
it does not like.
Cheers,
Hermann
saa7134: Hauppauge HVR-1110, support for radio and analog audio in
From: David Bentham <db260179@hotmail.com>
The audio switch is at 0x100 and radio on gpio 21.
Priority: normal
Signed-off-by: David Bentham <db260179@hotmail.com>
Reviewed-by: Hermann Pitton <hermann-pitton@arcor.de>
diff -r 8e6cda021e0e linux/drivers/media/video/saa7134/saa7134-cards.c
--- a/linux/drivers/media/video/saa7134/saa7134-cards.c Fri Sep 26 11:29:03 2008 +0200
+++ b/linux/drivers/media/video/saa7134/saa7134-cards.c Sun Sep 28 17:21:45 2008 +0200
@@ -3299,6 +3299,7 @@
},
[SAA7134_BOARD_HAUPPAUGE_HVR1110] = {
/* Thomas Genty <tomlohave@gmail.com> */
+ /* David Bentham <db260179@hotmail.com> */
.name = "Hauppauge WinTV-HVR1110 DVB-T/Hybrid",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
@@ -3307,23 +3308,26 @@
.radio_addr = ADDR_UNSET,
.tuner_config = 1,
.mpeg = SAA7134_MPEG_DVB,
- .inputs = {{
- .name = name_tv,
- .vmux = 1,
- .amux = TV,
- .tv = 1,
- },{
- .name = name_comp1,
- .vmux = 3,
- .amux = LINE2, /* FIXME: audio doesn't work on svideo/composite */
- },{
- .name = name_svideo,
- .vmux = 8,
- .amux = LINE2, /* FIXME: audio doesn't work on svideo/composite */
- }},
- .radio = {
- .name = name_radio,
- .amux = TV,
+ .gpiomask = 0x0200100,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ .gpio = 0x0000100,
+ }, {
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = LINE1,
+ }, {
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE1,
+ } },
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ .gpio = 0x0200100,
},
},
[SAA7134_BOARD_CINERGY_HT_PCMCIA] = {
[-- Attachment #2: Type: text/x-patch, Size: 1476 bytes --]
diff -r 8e6cda021e0e linux/drivers/media/video/saa7134/saa7134-cards.c
--- a/linux/drivers/media/video/saa7134/saa7134-cards.c Fri Sep 26 11:29:03 2008 +0200
+++ b/linux/drivers/media/video/saa7134/saa7134-cards.c Sun Sep 28 17:21:45 2008 +0200
@@ -3299,6 +3299,7 @@
},
[SAA7134_BOARD_HAUPPAUGE_HVR1110] = {
/* Thomas Genty <tomlohave@gmail.com> */
+ /* David Bentham <db260179@hotmail.com> */
.name = "Hauppauge WinTV-HVR1110 DVB-T/Hybrid",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
@@ -3307,23 +3308,26 @@
.radio_addr = ADDR_UNSET,
.tuner_config = 1,
.mpeg = SAA7134_MPEG_DVB,
- .inputs = {{
- .name = name_tv,
- .vmux = 1,
- .amux = TV,
- .tv = 1,
- },{
- .name = name_comp1,
- .vmux = 3,
- .amux = LINE2, /* FIXME: audio doesn't work on svideo/composite */
- },{
- .name = name_svideo,
- .vmux = 8,
- .amux = LINE2, /* FIXME: audio doesn't work on svideo/composite */
- }},
- .radio = {
- .name = name_radio,
- .amux = TV,
+ .gpiomask = 0x0200100,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .tv = 1,
+ .gpio = 0x0000100,
+ }, {
+ .name = name_comp1,
+ .vmux = 3,
+ .amux = LINE1,
+ }, {
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE1,
+ } },
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ .gpio = 0x0200100,
},
},
[SAA7134_BOARD_CINERGY_HT_PCMCIA] = {
[-- Attachment #3: Type: text/plain, Size: 164 bytes --]
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [linux-dvb] [PATCH] saa7134: add support for Tv(working config), radio and analog audio in on the Hauppauge HVR-1110
2008-09-28 16:29 ` hermann pitton
@ 2008-09-28 17:35 ` tomlohave
0 siblings, 0 replies; 5+ messages in thread
From: tomlohave @ 2008-09-28 17:35 UTC (permalink / raw)
To: hermann pitton
Cc: dabby bentam, linux-dvb, video4linux-list, Mauro Carvalho Chehab
hermann pitton a écrit :
> Hi,
>
> Am Sonntag, den 28.09.2008, 01:43 -0300 schrieb Mauro Carvalho Chehab:
>
>> On Sat, 27 Sep 2008 06:39:54 +0200
>> hermann pitton <hermann-pitton@arcor.de> wrote:
>>
>>
>>> Mauro,
>>>
>>> wait a little.
>>>
>> OK. Please forward it to me again, after everything being ok with the patch.
>>
>> Cheers,
>> Mauro
>>
>
> Thomas mailed me that he has some trouble with his current setup and
> might not be able to test that soon too.
>
> The patch is already OK and tested by David.
>
> David,
> as told, we need also your email in signed-off-by.
> I take it from the card's entry. Please give your OK.
>
> Here is it again with some cleanup for spaces.
> Mauro, please take it from the attachment.
> Evolution inline converts tabs to spaces or I must force it into a mode
> it does not like.
>
> Cheers,
> Hermann
>
>
> saa7134: Hauppauge HVR-1110, support for radio and analog audio in
>
> From: David Bentham <db260179@hotmail.com>
>
> The audio switch is at 0x100 and radio on gpio 21.
>
> Priority: normal
>
> Signed-off-by: David Bentham <db260179@hotmail.com>
> Reviewed-by: Hermann Pitton <hermann-pitton@arcor.de>
>
> diff -r 8e6cda021e0e linux/drivers/media/video/saa7134/saa7134-cards.c
> --- a/linux/drivers/media/video/saa7134/saa7134-cards.c Fri Sep 26 11:29:03 2008 +0200
> +++ b/linux/drivers/media/video/saa7134/saa7134-cards.c Sun Sep 28 17:21:45 2008 +0200
> @@ -3299,6 +3299,7 @@
> },
> [SAA7134_BOARD_HAUPPAUGE_HVR1110] = {
> /* Thomas Genty <tomlohave@gmail.com> */
> + /* David Bentham <db260179@hotmail.com> */
> .name = "Hauppauge WinTV-HVR1110 DVB-T/Hybrid",
> .audio_clock = 0x00187de7,
> .tuner_type = TUNER_PHILIPS_TDA8290,
> @@ -3307,23 +3308,26 @@
> .radio_addr = ADDR_UNSET,
> .tuner_config = 1,
> .mpeg = SAA7134_MPEG_DVB,
> - .inputs = {{
> - .name = name_tv,
> - .vmux = 1,
> - .amux = TV,
> - .tv = 1,
> - },{
> - .name = name_comp1,
> - .vmux = 3,
> - .amux = LINE2, /* FIXME: audio doesn't work on svideo/composite */
> - },{
> - .name = name_svideo,
> - .vmux = 8,
> - .amux = LINE2, /* FIXME: audio doesn't work on svideo/composite */
> - }},
> - .radio = {
> - .name = name_radio,
> - .amux = TV,
> + .gpiomask = 0x0200100,
> + .inputs = {{
> + .name = name_tv,
> + .vmux = 1,
> + .amux = TV,
> + .tv = 1,
> + .gpio = 0x0000100,
> + }, {
> + .name = name_comp1,
> + .vmux = 3,
> + .amux = LINE1,
> + }, {
> + .name = name_svideo,
> + .vmux = 8,
> + .amux = LINE1,
> + } },
> + .radio = {
> + .name = name_radio,
> + .amux = TV,
> + .gpio = 0x0200100,
> },
> },
> [SAA7134_BOARD_CINERGY_HT_PCMCIA] = {
>
>
It's ok for me
Tested-by: Thomas Genty <tomlohave@gmail.com>
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2008-09-28 17:35 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-09-26 22:13 [linux-dvb] [PATCH] saa7134: add support for Tv(working config), radio and analog audio in on the Hauppauge HVR-1110 dabby bentam
2008-09-27 4:39 ` hermann pitton
2008-09-28 4:43 ` Mauro Carvalho Chehab
2008-09-28 16:29 ` hermann pitton
2008-09-28 17:35 ` tomlohave
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox