From: Andrea Venturi <a.venturi@avalpa.com>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] siano sms1xxx driver not T-DMB ready?
Date: Thu, 09 Oct 2008 11:48:04 +0200 [thread overview]
Message-ID: <48EDD354.3090506@avalpa.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 2141 bytes --]
here in Italy (bologna) we have a T-DMB trial from Rai and other
broadcasters.
i got one Terratec Cinergy Piranha based on a Siano SMS1xxx chip and
indeed the T-DMB stream works on the "other OS".. (and the DVB-T works too)
this T-DMB stuff is still based on Transport Stream:
http://en.wikipedia.org/wiki/Digital_Multimedia_Broadcast
as i'd like to dump a full TS of the stream, i was thinking that it was
just setting the proper mode (2) in the sms1xxx module, i would have
been able to use the same "dvb-tools" like dvbstream to tune the right
frequency and dump the whole TS.
too easy, it seems! there were my steps:
1. i put the firmware file for T-DMB demodulation with the right name
"tdmb_stellar_usb.inp" in /lib/firmware
2. i loaded the module with the supposed right default mode: modprobe
sms1xxx default_mode=2
3. i put my stick on the linux, but the module didn't got up with this
error:
"SMS Device mode is not set for DVB operation."
I'm halted.
The showstopper come from this smsdvb.c where there's this control:
====================
if (smscore_get_devicke_mode(coredev) != 4) {
#if 1 /* new siano drop (1.2.17) does this -- yuck */
sms_err("SMS Device mode is not set for "
"DVB operation.");
return 0;
#else
====================
of course, this seems only a safety check.
let's hope it's not just a "marketing" showstopper (i'm going anyway to
try to relax this control, i bet i'm not going to burn anything inside
the device!)
probably there's more to be implemented to driver correctly the Siano
chip when not in DVB mode. but how much? ask here could be useful..
it should be easy to "implement" the T-DMB stuff inside the same DVB
scenario!
it's already a system based on transport stream. right?
sadly there are no open specs about it on the siano web site, just this
brief:
http://www.*siano-ms*.com/*pdf*s/00_Siano_SMS*1010*.*pd*f
does anyone know a solution about this issue?
is it so though to implement T-DMB decoding inside the DVB architecture?
are the specs available somewhere?
bye
andrea venturi
[-- Attachment #2: a_venturi.vcf --]
[-- Type: text/x-vcard, Size: 271 bytes --]
begin:vcard
fn:Andrea Venturi
n:;Andrea Venturi
org:Avalpa Digital Engineering SRL
adr;dom:;;Via dell'Arcoveggio 49/5;Bologna;BO;40129
email;internet:a.venturi@avalpa.com
title:CEO
tel;work:+39 0514187531
tel;cell:+39 3477142994
url:www.avalpa.com
version:2.1
end:vcard
[-- Attachment #3: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next reply other threads:[~2008-10-09 9:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-09 9:48 Andrea Venturi [this message]
2008-10-09 14:36 ` [linux-dvb] siano sms1xxx driver not T-DMB ready? Michael Krufky
2008-10-28 12:05 ` Uri Shkolnik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48EDD354.3090506@avalpa.com \
--to=a.venturi@avalpa.com \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox