[linux-dvb] S2API / TT3200 / STB0899 support

[linux-dvb] S2API / TT3200 / STB0899 support

[Steven Toth]

As you have all seen on the list recently, on the 'stb0899 and TT 
s2-3200' thread, Igor has ported Manu's TT3200 drivers to the S2API.

Personally, I have not had the time to test, but I hear they are working 
very well for some people, OK for others, and bad for some people.

Can everyone please post their comments into this thread?

Thanks,

Steve

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] S2API / TT3200 / STB0899 support

[Koen Rabaey]

Hi,


just replaced in my pc an HVR4000 by TT-3200 device, did a 'hg clone http://mercurial.intuxication.org/hg/s2-liplianin' and then built and installed the tree.

This is what I see in /var/log/messages after rebooting(relevant section):

Oct 14 20:55:23 krabaey-desktop kernel: [   15.480872] saa7146: register extension 'budget_ci dvb'.
Oct 14 20:55:23 krabaey-desktop kernel: [   15.480906] budget_ci dvb 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 14 20:55:23 krabaey-desktop kernel: [   15.480924] saa7146: found saa7146 @ mem f8aacc00 (revision 1, irq 16) (0x13c2,0x1019).
Oct 14 20:55:23 krabaey-desktop kernel: [   15.480929] saa7146 (0): dma buffer size 192512
Oct 14 20:55:23 krabaey-desktop kernel: [   15.480931] DVB: registering new adapter (TT-Budget S2-3200 PCI)
Oct 14 20:55:23 krabaey-desktop kernel: [   15.504947] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Oct 14 20:55:23 krabaey-desktop kernel: [   15.516983] adapter has MAC addr = 00:d0:5c:68:22:11
Oct 14 20:55:23 krabaey-desktop kernel: [   15.517314] input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:1e.0/0000:04:00.0/input/input6
Oct 14 20:55:23 krabaey-desktop kernel: [   15.537961] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
Oct 14 20:55:23 krabaey-desktop kernel: [   15.903289] stb0899_attach: Attaching STB0899
Oct 14 20:55:23 krabaey-desktop kernel: [   15.917736] stb6100_attach: Attaching STB6100
Oct 14 20:55:23 krabaey-desktop kernel: [   15.937033] DVB: registering frontend 0 (STB0899 Multistandard)...

Using vdr I am then succesfully able to watch these HD channels (normal DVB-S channels were also fine).

Premiere HD
Astra HD Demo
Discovery HD
Anixe HD

My dish is currently pointed to Astra 19.2 so I guess these are the only one HD channels I can receive.

I have no clue what kind of modulation these channels use.

If you have specific tests which may help you in evaluating this patch let me know.

Kind regards,

Koen



----- Original Message ----
> From: Steven Toth <stoth@linuxtv.org>
> To: linux-dvb <linux-dvb@linuxtv.org>
> Sent: Tuesday, October 14, 2008 8:09:24 PM
> Subject: [linux-dvb] S2API / TT3200 / STB0899 support
> 
> As you have all seen on the list recently, on the 'stb0899 and TT 
> s2-3200' thread, Igor has ported Manu's TT3200 drivers to the S2API.
> 
> Personally, I have not had the time to test, but I hear they are working 
> very well for some people, OK for others, and bad for some people.
> 
> Can everyone please post their comments into this thread?
> 
> Thanks,
> 
> Steve
> 
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb



      

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] S2API / TT3200 / STB0899 support

[Nicolai Spohrer]

Works for me, too. (Linux 2.6.24)

[ 1032.781874] DVB: registering new adapter (TT-Budget S2-3200 PCI)
[ 1033.906035] adapter has MAC addr = 00:d0:5c:64:be:00
[ 1033.906310] input: Budget-CI dvb ir receiver saa7146 (0) as 
/devices/pci0000:00/0000:00:14.4/0000:02:02.0/input/input7
[ 1034.071011] stb0899_attach: Attaching STB0899
[ 1034.071055] stb6100_attach: Attaching STB6100
[ 1034.071458] DVB: registering frontend 0 (STB0899 Multistandard)...

Zapping to DVB-S channels works fine and I can watch them with mplayer 
or xine.
Zapping to DVB-S2 channels also works, but I can only watch the recorded 
.ts-files with mplayer (audio only). But that's not s2api's fault. Just 
got to work out the right mplayer options...

N.S.

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[linux-dvb] S2API / TT3650-CI / STB0899 support

[Igor M. Liplianin]

Now I'm bringing s2-3650 support to S2 API.
As I understand, all that peoples take part in pctv452/s2-3600/s2-3650-ci development.

Dominik Kuhlen <dkuhlen@gmx.net>
Andre Weidemann <Andre.Weidemann@web.de>
Michael Schimek <mschimek@gmx.at>
So I ask you Dominik, Andre and Michael for your signed-off-by line
and/or send me your patches, as I don't know which part you took in development

Igor

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] S2API / TT3200 / STB0899 support

[Goga777]

> [ 1032.781874] DVB: registering new adapter (TT-Budget S2-3200 PCI)
> [ 1033.906035] adapter has MAC addr = 00:d0:5c:64:be:00
> [ 1033.906310] input: Budget-CI dvb ir receiver saa7146 (0) as 
> /devices/pci0000:00/0000:00:14.4/0000:02:02.0/input/input7
> [ 1034.071011] stb0899_attach: Attaching STB0899
> [ 1034.071055] stb6100_attach: Attaching STB6100
> [ 1034.071458] DVB: registering frontend 0 (STB0899 Multistandard)...
> 
> Zapping to DVB-S channels works fine and I can watch them with mplayer 
> or xine.
> Zapping to DVB-S2 channels also works, but I can only watch the recorded 
> .ts-files with mplayer (audio only). But that's not s2api's fault. Just 
> got to work out the right mplayer options...

You can use the ffplay instead of mplayer. Ffplay can play h.264 stream from dvb-s2 channels

Goga

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] S2API / TT3200 / STB0899 support

[Goga777]

Hi

FYI - nobody reported about of succes with dvb-s2 8psk channels with SR=30 000

Goga

-----Original Message-----
From: Steven Toth <stoth@linuxtv.org>
To: linux-dvb <linux-dvb@linuxtv.org>
Date: Tue, 14 Oct 2008 14:09:24 -0400
Subject: [linux-dvb] S2API / TT3200 / STB0899 support

> 
> As you have all seen on the list recently, on the 'stb0899 and TT 
> s2-3200' thread, Igor has ported Manu's TT3200 drivers to the S2API.
> 
> Personally, I have not had the time to test, but I hear they are working 
> very well for some people, OK for others, and bad for some people.
> 
> Can everyone please post their comments into this thread?


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] S2API / TT3200 / STB0899 support

[Nicolai Spohrer]

Goga777 wrote:
> You can use the ffplay instead of mplayer. Ffplay can play h.264 stream from dvb-s2 channel
>   

How?
When I dump the stream (dd if=/dev/..../dvr0 of=hd.ts) and use "ffplay 
hd.ts", I get
hd.ts: could not open codecs

ffplay - < /dev/..../dvr0
and ffplay /dev/..../dvr0

don't output anything (they run forever, I can neither see the video nor 
see the audio.

N.S.

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] S2API / TT3200 / STB0899 support

[Goga777]

> How?
> When I dump the stream (dd if=/dev/..../dvr0 of=hd.ts) and use "ffplay 
> hd.ts", I get
> hd.ts: could not open codecs

ffplay hd.ts should work well. Do you use the latest ffplay version ?

Goga



_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb