From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mx3.redhat.com (mx3.redhat.com [172.16.48.32]) by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id m9EMeU1N021748 for ; Tue, 14 Oct 2008 18:40:30 -0400 Received: from smtp105.biz.mail.re2.yahoo.com (smtp105.biz.mail.re2.yahoo.com [206.190.52.174]) by mx3.redhat.com (8.13.8/8.13.8) with SMTP id m9EMeGN9030497 for ; Tue, 14 Oct 2008 18:40:25 -0400 Message-ID: <48F51FCD.8030903@migmasys.com> Date: Tue, 14 Oct 2008 18:40:13 -0400 From: Ming Liu MIME-Version: 1.0 To: video4linux-list@redhat.com References: <20081014160013.1BA96619CC6@hormel.redhat.com> In-Reply-To: <20081014160013.1BA96619CC6@hormel.redhat.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: two USB em28XX grabbers List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: video4linux-list-bounces@redhat.com Errors-To: video4linux-list-bounces@redhat.com List-ID: Hello, I am working on a Fedora 6 with kernel 2.6.22. I am trying to connect two identical USB grabbers on a desktop computer. One grabber works fine based the sample codes from the V4L2 website, although the VIDIOC_S_FMT does not response correctly (It does not report error when a format, which the grabber does not support, is set. It is a little pain but I can live with it). However, I met a problem when I tried to connect the second camera onto the computer. There is only one device detected, and I have only /dev/video0. I tried to unplug and plug the second grabber. demsg complained that the em28XX driver can only be loaded once or something like. [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 [drm] Initialized i915 1.6.0 20060119 on minor 0 usb 5-8: USB disconnect, address 4 usb 5-8: new high speed USB device using ehci_hcd and address 5 usb 5-8: configuration #1 chosen from 1 choice em28xx new video device (eb1a:2820): interface 0, class 255 em28xx: Supports only 1 em28xx boards. em28xx: probe of 5-8:1.0 failed with error -12 The lsusb results look OK. [root@localhost ~]# lsusb Bus 005 Device 004: ID eb1a:2820 eMPIA Technology, Inc. Bus 005 Device 001: ID 0000:0000 Bus 005 Device 002: ID eb1a:2820 eMPIA Technology, Inc. Bus 004 Device 002: ID 058f:9360 Alcor Micro Corp. Bus 004 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 I am a little confused here. Is it a problem caused by driver or I missed something. Any comments will be more than helpful. Thanks in advance. Sincerely yours Ming PS: my full dmesg at boot with two grabbers connected. Linux version 2.6.22.14-72.fc6 (brewbuilder@hs20-bc1-6.build.redhat.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-13)) #1 SMP Wed Nov 21 15:12:59 EST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002ef30000 (usable) BIOS-e820: 000000002ef30000 - 000000002ef40000 (ACPI data) BIOS-e820: 000000002ef40000 - 000000002eff0000 (ACPI NVS) BIOS-e820: 000000002eff0000 - 000000002f000000 (reserved) BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) 0MB HIGHMEM available. 751MB LOWMEM available. found SMP MP-table at 000ff780 Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 192304) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 192304 HighMem 192304 -> 192304 early_node_map[1] active PFN ranges 0: 0 -> 192304 On node 0 totalpages: 192304 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1470 pages used for memmap Normal zone: 186738 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap DMI 2.3 present. Using APIC driver default ACPI: RSDP 000F6240, 0014 (r0 ACPIAM) ACPI: RSDT 2EF30000, 0034 (r1 GATEWA 04DT043 20041215 MSFT 97) ACPI: FACP 2EF30200, 0081 (r2 GATEWA 04DT043 20041215 MSFT 97) ACPI: DSDT 2EF30370, 4192 (r1 GATEWA 04DT043 1 MSFT 100000D) ACPI: FACS 2EF40000, 0040 ACPI: APIC 2EF30300, 0068 (r1 GATEWA 04DT043 20041215 MSFT 97) ACPI: ASF! 2EF34510, 0099 (r16 LEGEND I865PASF 1 MSFT 100000D) ACPI: WDDT 2EF345A9, 0040 (r1 INTEL OEMWDDT 1 MSFT 100000D) ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 2f000000:cfcf0000) Built 1 zonelists. Total pages: 190802 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07cd000 soft=c07ad000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2926.228 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 754760k/769216k available (2250k kernel code, 13776k reserved, 1202k data, 268k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffc56000 - 0xfffff000 (3748 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xef800000 - 0xff7fe000 ( 255 MB) lowmem : 0xc0000000 - 0xeef30000 ( 751 MB) .init : 0xc0765000 - 0xc07a8000 ( 268 kB) .data : 0xc0632bc0 - 0xc075f584 (1202 kB) .text : 0xc0400000 - 0xc0632bc0 (2250 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 5854.69 BogoMIPS (lpj=2927348) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 256K CPU: Hyper-Threading is disabled CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b180 0000441d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 14k freed ACPI: Core revision 20070126 CPU0: Intel(R) Celeron(R) CPU 2.93GHz stepping 01 Total of 1 processors activated (5854.69 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=336 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=488 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=176 bytes sizeof(task_struct)=1536 bytes Time: 22:05:48 Date: 09/14/108 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0500-053f claimed by ICH4 GPIO PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: Power Resource [URP1] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:0c: ioport range 0x400-0x47f has been reserved pnp: 00:0c: ioport range 0x680-0x6ff has been reserved pnp: 00:0c: ioport range 0x500-0x53f has been reserved pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved pnp: 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved pnp: 00:0c: iomem range 0xfed20000-0xfed9ffff could not be reserved pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved pnp: 00:0d: iomem range 0xc0000-0xdffff could not be reserved pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:0d: iomem range 0x100000-0x2effffff could not be reserved Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:1e.0 IO window: b000-bfff MEM window: ff800000-ff8fffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 2314k freed apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1224021948.347:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key CAA333178AF1EC5F - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU1] (supports 8 throttling states) ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected an Intel 865 Chipset. agpgart: Detected 16252K stolen memory. agpgart: AGP aperture is 128M @ 0xf0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: ST380011A, ATA DISK drive hdb: LITE-ON DVDRW SOHW-1633S, ATAPI CD/DVD-ROM drive hda: selected mode 0x45 hdb: selected mode 0x44 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... hda: max request size: 512KiB hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 ide-floppy driver 0.99.newide PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Magic number: 12:922:97 Freeing unused kernel memory: 268k freed Write protecting the kernel read-only data: 925k USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000c400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000c800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000cc00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000d000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected input: ImPS/2 Generic Wheel Mouse as /class/input/input2 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa7f400 usb 3-2: new full speed USB device using uhci_hcd and address 2 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected SCSI subsystem initialized libata version 2.21 loaded. ata_piix 0000:00:1f.2: version 2.11 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e402 bmdma 0x0001d800 irq 16 ata2: SATA max UDMA/133 cmd 0x0001e000 ctl 0x0001dc02 bmdma 0x0001d808 irq 16 usb 5-6: new high speed USB device using ehci_hcd and address 2 Initializing USB Mass Storage driver... usb 5-6: configuration #1 chosen from 1 choice usb 5-8: new high speed USB device using ehci_hcd and address 4 usb 5-8: configuration #1 chosen from 1 choice usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb 4-1: new full speed USB device using uhci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 sd 2:0:0:0: [sda] Attached SCSI removable disk scsi 2:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 sd 2:0:0:1: [sdb] Attached SCSI removable disk scsi 2:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 sd 2:0:0:2: [sdc] Attached SCSI removable disk scsi 2:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 sd 2:0:0:3: [sdd] Attached SCSI removable disk usb-storage: device scan complete device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. audit(1224021961.879:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 3 users, 6 roles, 1676 types, 213 bools, 1 sens, 1024 cats security: 61 classes, 58427 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1224021962.129:3): policy loaded auid=4294967295 parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 Linux video capture interface: v2.00 sd 2:0:0:0: Attached scsi generic sg0 type 0 sd 2:0:0:1: Attached scsi generic sg1 type 0 sd 2:0:0:2: Attached scsi generic sg2 type 0 sd 2:0:0:3: Attached scsi generic sg3 type 0 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20 e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 20 (level, low) -> IRQ 21 intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or don't want to <4>intel_rng: disable this in firmware setup, and <4>intel_rng: if you are certain that your <4>intel_rng: system has a functional RNG, try<4>intel_rng: using the 'no_fwh_detect' option. em28xx v4l2 driver version 0.0.1 loaded em28xx new video device (eb1a:2820): interface 0, class 255 em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 1024 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 e100: eth0: e100_probe: addr 0xff8ff000, irq 21, MAC addr 00:13:20:20:CD:7C iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) saa7115 1-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0) ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 50007 usecs intel8x0: clocking to 48000 registered VBI em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 em28xx #0: Found MSI VOX USB 2.0 em28xx new video device (eb1a:2820): interface 0, class 255 em28xx: Supports only 1 em28xx boards. em28xx: probe of 5-8:1.0 failed with error -12 usbcore: registered new interface driver em28xx FDC 0 is a post-1991 82077 lp0: using parport0 (interrupt-driven). lp0: console ready sonypi: Sony Programmable I/O Controller Driver v1.26. SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 No dock devices found. input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input4 ACPI: Sleep Button (CM) [SLPB] md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev hda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 1540088k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:1540088k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (6009 buckets, 48072 max) e100: eth0: e100_watchdog: link up, 10Mbps, half-duplex ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts eth0: no IPv6 routers present [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 [drm] Initialized i915 1.6.0 20060119 on minor 0 -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list