From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from dd16712.kasserver.com ([85.13.137.159]) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1Kr6fW-0006bz-GJ for linux-dvb@linuxtv.org; Sat, 18 Oct 2008 09:56:17 +0200 Received: from [192.168.178.120] (p50813953.dip0.t-ipconnect.de [80.129.57.83]) by dd16712.kasserver.com (Postfix) with ESMTP id C2329180CCF66 for ; Sat, 18 Oct 2008 09:56:10 +0200 (CEST) Message-ID: <48F9969D.90305@helmutauer.de> Date: Sat, 18 Oct 2008 09:56:13 +0200 From: Helmut Auer MIME-Version: 1.0 To: linux-dvb@linuxtv.org Subject: [linux-dvb] Problems with conexant CX24123/CX24109 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: Hi, I have a Geniatech PCI DVB-s with CX24123/CX24109. This card cannot zap to the german ARD transponder, all other channels are running fine. The card runs fine under windows . dmesg shows at loading: cx88/0: cx2388x v4l2 driver version 0.0.6 loaded ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 cx88[0]: subsystem: 14f1:0084, board: Geniatech DVB-S [card=52,autodetected] cx88[0]: TV tuner type 4, Radio tuner type -1 cx88[0]/0: found at 0000:01:09.0, rev: 5, irq: 10, latency: 165, mmio: 0xfc000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded cx88[0]/2: cx2388x 8802 Driver Manager ACPI: PCI Interrupt 0000:01:09.2[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 cx88[0]/2: found at 0000:01:09.2, rev: 5, irq: 10, latency: 64, mmio: 0xfd000000 cx88/2: cx2388x dvb driver version 0.0.6 loaded cx88/2: registering cx8802 driver, type: dvb access: shared cx88[0]/2: subsystem: 14f1:0084, board: Geniatech DVB-S [card=52] cx88[0]/2: cx2388x based DVB/ATSC card CX24123: detected CX24123 DVB: registering new adapter (cx88[0]) DVB: registering frontend 0 (Conexant CX24123/CX24109)... and when the error occurs: cx88[0]: irq mpeg [0x100000] ts_err?* cx88[0]/2-mpeg: general errors: 0x00100000 Any hints where I can tune some parameters ? -- Helmut Auer, helmut@helmutauer.de _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb