From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from dd16712.kasserver.com ([85.13.137.159]) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1Kr6hC-00077D-BK for linux-dvb@linuxtv.org; Sat, 18 Oct 2008 09:57:59 +0200 Received: from [192.168.178.120] (p50813953.dip0.t-ipconnect.de [80.129.57.83]) by dd16712.kasserver.com (Postfix) with ESMTP id 0A9EB180CCF66 for ; Sat, 18 Oct 2008 09:57:54 +0200 (CEST) Message-ID: <48F99706.2080905@helmutauer.de> Date: Sat, 18 Oct 2008 09:57:58 +0200 From: Helmut Auer MIME-Version: 1.0 To: linux-dvb@linuxtv.org References: <48F9969D.90305@helmutauer.de> In-Reply-To: <48F9969D.90305@helmutauer.de> Subject: Re: [linux-dvb] Problems with conexant CX24123/CX24109 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: Helmut Auer schrieb: > Hi, > > I have a Geniatech PCI DVB-s with CX24123/CX24109. > This card cannot zap to the german ARD transponder, all other channels > are running fine. > The card runs fine under windows . > dmesg shows at loading: > > cx88/0: cx2388x v4l2 driver version 0.0.6 loaded > ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKC] -> GSI 10 (level, > low) -> IRQ 10 > cx88[0]: subsystem: 14f1:0084, board: Geniatech DVB-S [card=52,autodetected] > cx88[0]: TV tuner type 4, Radio tuner type -1 > cx88[0]/0: found at 0000:01:09.0, rev: 5, irq: 10, latency: 165, mmio: > 0xfc000000 > cx88[0]/0: registered device video0 [v4l2] > cx88[0]/0: registered device vbi0 > cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded > cx88[0]/2: cx2388x 8802 Driver Manager > ACPI: PCI Interrupt 0000:01:09.2[A] -> Link [LNKC] -> GSI 10 (level, > low) -> IRQ 10 > cx88[0]/2: found at 0000:01:09.2, rev: 5, irq: 10, latency: 64, mmio: > 0xfd000000 > cx88/2: cx2388x dvb driver version 0.0.6 loaded > cx88/2: registering cx8802 driver, type: dvb access: shared > cx88[0]/2: subsystem: 14f1:0084, board: Geniatech DVB-S [card=52] > cx88[0]/2: cx2388x based DVB/ATSC card > CX24123: detected CX24123 > DVB: registering new adapter (cx88[0]) > DVB: registering frontend 0 (Conexant CX24123/CX24109)... > > and when the error occurs: > > cx88[0]: irq mpeg [0x100000] ts_err?* > cx88[0]/2-mpeg: general errors: 0x00100000 > > Any hints where I can tune some parameters ? > > P.S. The problem occurs with current v4l-hg and also with a 1 year old hg snapshot. -- Helmut Auer, helmut@helmutauer.de _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb