* Re: strange hauppauge wintv device number
[not found] <15770467.41224260830600.JavaMail.dave@mycroft>
@ 2008-10-17 20:50 ` Andy Walls
2008-10-18 22:48 ` searching list archives via gmane.org [was Re: strange hauppauge wintv device number] Arthur Marsh
0 siblings, 1 reply; 2+ messages in thread
From: Andy Walls @ 2008-10-17 20:50 UTC (permalink / raw)
To: Dave Huseby; +Cc: video4linux-list
On Fri, 2008-10-17 at 09:27 -0700, Dave Huseby wrote:
> From: "Andy Walls" <awalls@radix.net>
> On Thu, 2008-10-16 at 14:26 -0700, Dave Huseby wrote:
> > > Hi Everybody,
> > >
> > > I just bought an old hauppauge wintv card off of ebay and even though it is a model 401--which everybody claims to be supported by linux--it isn't working with tvtime or xawtv. I noticed that its subsystem id is not detected by the bttv driver in the 2.6 kernel. Here's the lspci dump:
> > >
> > > 01:01.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
> > > Subsystem: Hauppauge computer works Inc. Unknown device 03eb <----- 03eb instead of the usual 13eb
> > > Flags: bus master, medium devsel, latency 64, IRQ 21
> > > Memory at cfdfe000 (32-bit, prefetchable) [size=4K]
> > > Capabilities: [44] Vital Product Data
> > > Capabilities: [4c] Power Management version 2
> > >
> > > 01:01.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
> > > Subsystem: Hauppauge computer works Inc. Unknown device 03eb <----- 03eb instead of the usual 13eb
> > > Flags: medium devsel, IRQ 21
> > > Memory at cfdff000 (32-bit, prefetchable) [size=4K]
> > > Capabilities: [44] Vital Product Data
> > > Capabilities: [4c] Power Management version 2
> >
> > A user on the list had a similar problem in early May of this year. His
> > device Vendor ID was coming across as 009e instead of 109e for
> > Brooktree. He resolved his problem by pulling the card out, blowing the
> > dust out of the slot, and reinstalling the card.
> Yep, that was it. I pulled the card out, blew out the slot with a can
> of air, plugged it back in and everything worked perfectly.
Cool. Just copying the list for posterity, in case someone else has the
problem in the future. Not that it's easy for non-list subscribers to
check the v4l list archives.
Regards,
Andy
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
^ permalink raw reply [flat|nested] 2+ messages in thread
* searching list archives via gmane.org [was Re: strange hauppauge wintv device number]
2008-10-17 20:50 ` strange hauppauge wintv device number Andy Walls
@ 2008-10-18 22:48 ` Arthur Marsh
0 siblings, 0 replies; 2+ messages in thread
From: Arthur Marsh @ 2008-10-18 22:48 UTC (permalink / raw)
To: video4linux-list
Andy Walls wrote, on 2008-10-18 07:20:
[edit]
> Cool. Just copying the list for posterity, in case someone else has the
> problem in the future. Not that it's easy for non-list subscribers to
> check the v4l list archives.
>
> Regards,
> Andy
On the contrary, one can go to http://gmane.org and search on newsgroup:
gmane.comp.video.video4linux
Regards,
Arthur.
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-10-18 23:00 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <15770467.41224260830600.JavaMail.dave@mycroft>
2008-10-17 20:50 ` strange hauppauge wintv device number Andy Walls
2008-10-18 22:48 ` searching list archives via gmane.org [was Re: strange hauppauge wintv device number] Arthur Marsh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox