public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: Boyan <btanastasov@yahoo.co.uk>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] [REGRESSION] - Cable2PC/CableStar 2 DVB-C not detected
Date: Thu, 23 Oct 2008 14:21:00 +0300	[thread overview]
Message-ID: <49005E1C.3010104@yahoo.co.uk> (raw)


Hello,

There is a regression regarding this DVB-C card from the subject, which 
as it looks is not very new, but nobody noticed the problem.
After bisecting I've found the commit which is responsible for this 
problem - that the card is not detected.
By the way mercurial bisect was not very useful because some commits 
does not compile or load, so I had to "simulate" bisecting.

Bad version:

changeset:   7484:0b82bb67fb80
parent:      7482:4fcb2ce44347
parent:      7483:13244661a8df
user:        Mauro Carvalho Chehab <mchehab@infradead.org>
date:        Tue Apr 01 18:59:34 2008 -0300
summary:     merge: http://linuxtv.org/hg/~mkrufky/tuner


b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded 
successfully
flexcop-pci: will use the HW PID filter.
flexcop-pci: card revision 2
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 21 (level, low) -> IRQ 22
DVB: registering new adapter (FlexCop Digital TV device)
b2c2-flexcop: MAC address = 00:d0:d7:13:c4:e4
b2c2-flexcop: i2c master_xfer failed
CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121)
CX24123: wrong demod revision: 87
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
mt352_read_register: readreg error (reg=127, ret==-121)
b2c2-flexcop: i2c master_xfer failed
nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121)
Unknown/Unsupported NXT chip: 00 00 00 00 00
b2c2-flexcop: i2c master_xfer failed
lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121)
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
stv0297_readreg: readreg error (reg == 0x80, ret == -121)
b2c2-flexcop: i2c master_xfer failed
mt312_read: ret == -121
b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter
ACPI: PCI interrupt for device 0000:06:00.0 disabled


Good version:

changeset:   7483:13244661a8df
parent:      7442:b7bb2b116cbb
user:        Michael Krufky <mkrufky@linuxtv.org>
date:        Sun Mar 30 13:00:45 2008 -0400
summary:     tuner-simple: fix broken build dependency


b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded 
successfully
flexcop-pci: will use the HW PID filter.
flexcop-pci: card revision 2
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 21 (level, low) -> IRQ 22
DVB: registering new adapter (FlexCop Digital TV device)
b2c2-flexcop: MAC address = 00:d0:d7:13:c4:e4
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: i2c master_xfer failed
mt352_read_register: readreg error (reg=127, ret==-121)
b2c2-flexcop: i2c master_xfer failed
nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121)
Unknown/Unsupported NXT chip: 00 00 00 00 00
b2c2-flexcop: i2c master_xfer failed
lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121)
b2c2-flexcop: i2c master_xfer failed
b2c2-flexcop: found the stv0297 at i2c address: 0x1c
DVB: registering frontend 0 (ST STV0297 DVB-C)...
b2c2-flexcop: initialization of 'Cable2PC/CableStar 2 DVB-C' at the 
'PCI' bus controlled by a 'FlexCopIIb' complete


The changeset 7484:0b82bb67fb80 is rather big, but I'm just guessing 
that removing/integrating of this file with other flexcop files is the 
cause:

linux/drivers/media/dvb/b2c2/stv0297_cs2.c

Kernel version 2.6.23. Currently can't test with newer kernel on this 
computer.
I can give more info if needed.


Regards


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

             reply	other threads:[~2008-10-23 11:21 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-10-23 11:21 Boyan [this message]
2008-12-08 17:42 ` [linux-dvb] [REGRESSION] - Cable2PC/CableStar 2 DVB-C not detected Patrick Boettcher
2008-12-09 17:18   ` Boyan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49005E1C.3010104@yahoo.co.uk \
    --to=btanastasov@yahoo.co.uk \
    --cc=linux-dvb@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox