[linux-dvb] Any DVB-C tuner with working CAM?

[linux-dvb] Any DVB-C tuner with working CAM?

[Tomas Drajsajtl]

Hello,
I have bought and tested two DVB-C cards which are supported according to
http://www.linuxtv.org/wiki/index.php/DVB-C_PCI_Cards
Both are perfectly working with FTA but none with the CAM.

1. TechnoTrend Premium DVB-C 2300

DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-CA rev1.X)
adapter has MAC addr = ....
dvb-ttpci: gpioirq unknown type=0 len=0
dvb-ttpci: info @ card 3: firm f0240009, rtsl b0250018, vid 71010068, app
80002622
dvb-ttpci: firmware @ card 3 supports CI link layer interface
dvb-ttpci: DVB-C analog module @ card 3 detected, initializing MSP3415
dvb_ttpci: saa7113 not accessible.
saa7146_vv: saa7146 (0): registered device video2 [v4l2]
saa7146_vv: saa7146 (0): registered device vbi2 [v4l2]
DVB: registering frontend 3 (ST STV0297 DVB-C)...

Applications detect the inserted CAM even if the CAM is not inserted ;-) but
even when it is, no scrambled channel is decrypted.

2. Technisat CableStar HD2

found a VP-2040 PCI DVB-C device on (01:02.0),
    Mantis Rev 1 [1ae4:0002], irq: 18, latency: 64
    memory: 0xefeff000, mmio: 0xffffc20000aee000
    MAC Address=[....]
mantis_alloc_buffers (0): DMA=0x7d820000 cpu=0xffff81007d820000 size=65536
mantis_alloc_buffers (0): RISC=0x7e50e000 cpu=0xffff81007e50e000 size=1000
DVB: registering new adapter (Mantis dvb adapter)

It says that an unsupported CAM is inserted. :-( Then I found in this
mailing list that the mantis CI-CAM support is not finalized yet. I
appreciate the work that Manu does with the mantis driver and I trust that
it will be supported in the comming months but I would expect that the Wiki
page mentioned above will have also the information about not yet supported
CI! :-(

So I have the CAM, two DVB-C cards but can't watch the channels I pay every
month... I spent many days with Google to find out a working solution with
these two or another card but unsuccessfully. Can somebody please advice me
a DVB-C card with CI which _is on market_ and does work with Technisat Conax
CAM?

Thanks in advance,
Tomas


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Any DVB-C tuner with working CAM?

[Ruediger Dohmhardt]

Tomas Drajsajtl schrieb:
> Hello,
> I have bought and tested two DVB-C cards which are supported according to
> http://www.linuxtv.org/wiki/index.php/DVB-C_PCI_Cards
> Both are perfectly working with FTA but none with the CAM.
>
> 1. TechnoTrend Premium DVB-C 2300
>   
TT DVB-C 2300 works fine here with  AlphaCrypt -Light. This card has
CI/CAM support for several years already.
And it has worked here for several years with CI/CAM.

The Mantis Chip 2033 does not work with the CAM yet.

The KNC One TV-Station DVB-C Plus works fine with the AlphaCrypt -Light,
too (Driver Multiproto_plus).
With the last combination and VDR-1.7 + xineliboutput I can watch Anixe
HD-TV.



Ciao Ruediger D.


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] TT DVB-C 2300 and CAM, Was: Any DVB-C tuner with working CAM?

[Tomas Drajsajtl]

> > Hello,
> > I have bought and tested two DVB-C cards which are supported according
to
> > http://www.linuxtv.org/wiki/index.php/DVB-C_PCI_Cards
> > Both are perfectly working with FTA but none with the CAM.
> >
> > 1. TechnoTrend Premium DVB-C 2300
> >
> TT DVB-C 2300 works fine here with  AlphaCrypt -Light. This card has
> CI/CAM support for several years already.
> And it has worked here for several years with CI/CAM.

Interesting. I have Technisat Technicrypt CXV (Conax) inserted and none of
the channels is decrypted. Tried czap, vlc, vdr.

uname -a:
Linux pvr 2.6.23.17-88.fc7 #1 SMP Thu May 15 00:02:29 EDT 2008 x86_64 x86_64
x86_64 GNU/Linux

lspci -nvv:
01:00.0 0480: 1131:7146 (rev 01)
        Subsystem: 13c2:000a
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (3750ns min, 9500ns max)
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at eedff400 (32-bit, non-prefetchable) [size=512]

czap - no errors reported but no useful data output

vlc - reports detected CAM doesn't matter if it's really inserted or not:
[00000338] dvb access debug: Opening device /dev/dvb/adapter0/ca0
[00000338] dvb access debug: CAMInit: CA interface with 2 slots
[00000338] dvb access debug: CAMInit: CI link layer level interface type
[00000338] dvb access debug: CAMInit: built-in descrambler detected
[00000338] dvb access debug: CAMInit: 16 available descramblers (keys)
[00000338] dvb access debug: CAMInit: ECD scrambling system supported

vdr - says only
Nov  3 07:42:33 pvr vdr: [16467] ERROR: no useful data seen within 10627076
byte of video stream
I know that vdr should report something about detected CAM but nothing in
it's log file...

Tomas


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] TT DVB-C 2300 and CAM, Was: Any DVB-C tuner with working CAM?

[Ruediger Dohmhardt]

[-- Attachment #1: Type: text/plain, Size: 230 bytes --]

Dear Tomas

Attached you find part of my
/var/log/boot.msg

and

/var/log/messages

One hint: When switching from vdr 1.4.x to 1.5/1.6/1.7  the channel.conf
must be adapted with respect to decrypted channels.

Ciao Ruediger D.




[-- Attachment #2: dvb-ttpci.txt --]
[-- Type: text/plain, Size: 6037 bytes --]

/*
* /var/log/boot.msg
*/

<4>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
<6>ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
<4>saa7146: found saa7146 @ mem f887e000 (revision 1, irq 18) (0x13c2,0x000a).
<7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c015112f7d8]
<6>DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-CA rev1.X)
<7>ieee1394: Host added: ID:BUS[1-00:1023]  GUID[00046100000905df]
<4>adapter has MAC addr = 00:d0:5c:04:45:e6
<4>dvb-ttpci: gpioirq unknown type=0 len=0
<4>dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622
<4>dvb-ttpci: firmware @ card 0 supports CI link layer interface
<4>dvb-ttpci: DVB-C analog module @ card 0 detected, initializing MSP3415
<4>dvb_ttpci: saa7113 not accessible.
<4>saa7146_vv: saa7146 (0): registered device video0 [v4l2]
<4>saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
<4>DVB: registering frontend 0 (ST STV0297 DVB-C)...
<6>input: DVB on-card IR receiver as /devices/pci0000:00/0000:00:08.0/0000:01:0a.0/input/input5
<6>dvb-ttpci: found av7110-0.
<6>Adding 1052248k swap on /dev/sda2.  Priority:-1 extents:1 across:1052248k
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
<6>loop: module loaded



/*
* /var/log/messages
*/

Nov  3 22:45:02 linux-nszr vdr: [1245] VDR version 1.4.2-2 started
Nov  3 22:45:02 linux-nszr vdr: [1245] loading /video/setup.conf
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: AntiAlias = 1
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: ChannelEntryTimeout = 1000
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: DisplaySubtitles = 0
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: EmergencyExit = 1
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: FontFix = Courier:Bold
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: FontFixSize = 20
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: FontOsd = Sans Serif:Bold
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: FontOsdSize = 22
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: FontSml = Sans Serif
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: FontSmlSize = 18
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: MenuKeyCloses = 0
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: NextWakeupTime = 0
Nov  3 22:45:02 linux-nszr vdr: [1245] ERROR: unknown config parameter: SortTimers = 1
Nov  3 22:45:03 linux-nszr vdr: [1245] ERROR: unknown config parameter: SubtitleBgTransparency = 0
Nov  3 22:45:03 linux-nszr vdr: [1245] ERROR: unknown config parameter: SubtitleFgTransparency = 0
Nov  3 22:45:03 linux-nszr vdr: [1245] ERROR: unknown config parameter: SubtitleLanguages = 
Nov  3 22:45:03 linux-nszr vdr: [1245] ERROR: unknown config parameter: SubtitleOffset = 0
Nov  3 22:45:03 linux-nszr vdr: [1245] loading /video/sources.conf
Nov  3 22:45:03 linux-nszr vdr: [1245] loading /video/diseqc.conf
Nov  3 22:45:03 linux-nszr vdr: [1245] loading /video/channels.conf
Nov  3 22:45:03 linux-nszr vdr: [1245] loading /video/timers.conf
Nov  3 22:45:03 linux-nszr vdr: [1245] loading /video/commands.conf
Nov  3 22:45:03 linux-nszr vdr: [1245] loading /video/svdrphosts.conf
Nov  3 22:45:03 linux-nszr vdr: [1245] loading /video/remote.conf
Nov  3 22:45:03 linux-nszr vdr: [1245] loading /video/keymacros.conf
Nov  3 22:45:03 linux-nszr vdr: [1246] video directory scanner thread started (pid=1245, tid=1246)
Nov  3 22:45:03 linux-nszr vdr: [1246] video directory scanner thread ended (pid=1245, tid=1246)
Nov  3 22:45:03 linux-nszr vdr: [1247] video directory scanner thread started (pid=1245, tid=1247)
Nov  3 22:45:03 linux-nszr vdr: [1247] video directory scanner thread ended (pid=1245, tid=1247)
Nov  3 22:45:03 linux-nszr vdr: [1245] reading EPG data from /video/epg.data
Nov  3 22:45:03 linux-nszr vdr: [1245] probing /dev/dvb/adapter0/frontend0
Nov  3 22:45:05 linux-nszr vdr: [1249] tuner on device 1 thread started (pid=1245, tid=1249)
Nov  3 22:45:05 linux-nszr vdr: [1250] section handler thread started (pid=1245, tid=1250)
Nov  3 22:45:05 linux-nszr vdr: [1245] found 1 video device
Nov  3 22:45:05 linux-nszr vdr: [1245] setting primary device to 1
Nov  3 22:45:05 linux-nszr vdr: [1245] SVDRP listening on port 2001
Nov  3 22:45:05 linux-nszr vdr: [1245] setting current skin to "sttng"
Nov  3 22:45:05 linux-nszr vdr: [1245] loading /video/themes/sttng-default.theme
Nov  3 22:45:05 linux-nszr vdr: [1245] ERROR: /dev/lircd: No such file or directory
Nov  3 22:45:05 linux-nszr vdr: [1251] KBD remote control thread started (pid=1245, tid=1251)
Nov  3 22:45:05 linux-nszr vdr: [1245] ERROR: remote control LIRC not ready!
Nov  3 22:45:05 linux-nszr vdr: [1245] remote control KBD - keys known
Nov  3 22:45:07 linux-nszr vdr: [1245] CAM: AlphaCrypt Light, 01, 4A20, 4A20
Nov  3 22:45:08 linux-nszr vdr: [1245] switching to channel 1
Nov  3 22:45:11 linux-nszr vdr: [1250] changing name of channel 24 from 'Bayerisches FS Süd,;ARD' to 'Bayerisches FS S#,;ARD'
Nov  3 22:45:11 linux-nszr vdr: [1250] changing name of channel 26 from 'WDR Köln,;ARD' to 'WDR K#n,;ARD'
Nov  3 22:45:13 linux-nszr vdr: [1245] switching to channel 34
Nov  3 22:45:16 linux-nszr vdr: [1250] creating new channel 'OraiaTV (engl),;Digital Free' on C transponder 330 with id 61441-10008-53119-0
Nov  3 22:45:16 linux-nszr vdr: [1250] changing name of channel 642 from 'Bayern Mobil,;ARD' to 'BAYERN plus,;ARD'
Nov  3 22:45:16 linux-nszr vdr: [1245] retuning due to modification of channel 34
Nov  3 22:45:16 linux-nszr vdr: [1245] switching to channel 34
Nov  3 22:45:18 linux-nszr vdr: [1250] changing pids of channel 676 from 0+0:0:0 to 941+941:942=deu:0
Nov  3 22:45:18 linux-nszr vdr: [1250] changing caids of channel 676 from 0 to 1801,1722,1834



[-- Attachment #3: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] TT DVB-C 2300 and CAM, Was: Any DVB-C tuner with working CAM?

[Tomas Drajsajtl]

Dear Ruediger,
thanks for the reply!

I tried to upgrade from vdr 1.4.7 to 1.6.0 and see some difference:
Nov  4 12:00:45 pvr vdr: [4375] CAM 1: module present
Nov  4 12:01:23 pvr vdr: [4375] CAM 1: no module present
Nov  4 12:01:23 pvr vdr: [4375] CAM 1: module present
Nov  4 12:02:01 pvr vdr: [4375] CAM 1: no module present
Nov  4 12:02:02 pvr vdr: [4375] CAM 1: module present
Nov  4 12:02:14 pvr vdr: [4375] CAM 1: no module present
.... and so on.

And still no output from the scrambled channels. I saw some CAM timeout fix
in the 1.6.0-1 patch but no change when applied. Also 1.6.0-2 didn't help.

Regards,
Tomas

> Dear Tomas
> 
> Attached you find part of my
> /var/log/boot.msg
> 
> and
> 
> /var/log/messages
> 
> One hint: When switching from vdr 1.4.x to 1.5/1.6/1.7  the channel.conf
> must be adapted with respect to decrypted channels.
> 
> Ciao Ruediger D.
> 
> 
> 


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Any DVB-C tuner with working CAM?

[Rune Evjen]

[-- Attachment #1.1: Type: text/plain, Size: 3176 bytes --]

Hi,

I use the TT 2300-C Premium card with a Conax CAM (rev 1.1) - 4.00e and this
works fine with my cable provider. The CAM was ordered from
www.dvb-shop.netalong with the DVB-C card.

Apparently they only ship rev 1.2 ( (
http://www.dvbshop.net/product_info.php/info/p20_Conax-CAM
--Rev--1-2----4-00e.html) now which also supports the bitrates of HDTV, but
I have not tested this CAM, although dvb-shop states that rev 1.2 is
compatible as well.

My cable provider is not Technisat, but I guess that if Technisat encryption
is based on Conax 4.00e then the CAM should be okay.

My configuration works in mythtv and (by recollection) mplayer and xine.

I get the same dmesg output as you for the tt-dvbpci card.

I also use a Terratec Cinergy-C Card using the mantis drivers but the CI
interface of that card is not yet supported as well.

Rune

2008/11/2 Tomas Drajsajtl <linux-dvb@drajsajtl.cz>

> Hello,
> I have bought and tested two DVB-C cards which are supported according to
> http://www.linuxtv.org/wiki/index.php/DVB-C_PCI_Cards
> Both are perfectly working with FTA but none with the CAM.
>
> 1. TechnoTrend Premium DVB-C 2300
>
> DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-CA rev1.X)
> adapter has MAC addr = ....
> dvb-ttpci: gpioirq unknown type=0 len=0
> dvb-ttpci: info @ card 3: firm f0240009, rtsl b0250018, vid 71010068, app
> 80002622
> dvb-ttpci: firmware @ card 3 supports CI link layer interface
> dvb-ttpci: DVB-C analog module @ card 3 detected, initializing MSP3415
> dvb_ttpci: saa7113 not accessible.
> saa7146_vv: saa7146 (0): registered device video2 [v4l2]
> saa7146_vv: saa7146 (0): registered device vbi2 [v4l2]
> DVB: registering frontend 3 (ST STV0297 DVB-C)...
>
> Applications detect the inserted CAM even if the CAM is not inserted ;-)
> but
> even when it is, no scrambled channel is decrypted.
>
> 2. Technisat CableStar HD2
>
> found a VP-2040 PCI DVB-C device on (01:02.0),
>    Mantis Rev 1 [1ae4:0002], irq: 18, latency: 64
>    memory: 0xefeff000, mmio: 0xffffc20000aee000
>    MAC Address=[....]
> mantis_alloc_buffers (0): DMA=0x7d820000 cpu=0xffff81007d820000 size=65536
> mantis_alloc_buffers (0): RISC=0x7e50e000 cpu=0xffff81007e50e000 size=1000
> DVB: registering new adapter (Mantis dvb adapter)
>
> It says that an unsupported CAM is inserted. :-( Then I found in this
> mailing list that the mantis CI-CAM support is not finalized yet. I
> appreciate the work that Manu does with the mantis driver and I trust that
> it will be supported in the comming months but I would expect that the Wiki
> page mentioned above will have also the information about not yet supported
> CI! :-(
>
> So I have the CAM, two DVB-C cards but can't watch the channels I pay every
> month... I spent many days with Google to find out a working solution with
> these two or another card but unsuccessfully. Can somebody please advice me
> a DVB-C card with CI which _is on market_ and does work with Technisat
> Conax
> CAM?
>
> Thanks in advance,
> Tomas
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>

[-- Attachment #1.2: Type: text/html, Size: 4024 bytes --]

[-- Attachment #2: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Any DVB-C tuner with working CAM?

[Tomas Drajsajtl]

[-- Attachment #1.1: Type: text/plain, Size: 1396 bytes --]

Dear Rune,
what is your kernel version? I have the same tuner from the same shop but the CAM is Technisat. I cannot replace the CAM provided by my cable oprerator because they won't pair their Conax card with the CAM like you have for me. :-(
Is it possible that TT 2300-C Premium + Technisat Technicrypt CX http://www.technisat.com/index9acb.html?nav=CI_modules,en,68-32 can have problems with the linux driver?

Regards,
Tomas

  ----- Original Message ----- 
  From: Rune Evjen 
  To: Tomas Drajsajtl 
  Cc: linux-dvb@linuxtv.org 
  Sent: Thursday, November 13, 2008 2:56 PM
  Subject: Re: [linux-dvb] Any DVB-C tuner with working CAM?


  Hi,

  I use the TT 2300-C Premium card with a Conax CAM (rev 1.1) - 4.00e and this works fine with my cable provider. The CAM was ordered from www.dvb-shop.net along with the DVB-C card.

  Apparently they only ship rev 1.2 ( (http://www.dvbshop.net/product_info.php/info/p20_Conax-CAM--Rev--1-2----4-00e.html) now which also supports the bitrates of HDTV, but I have not tested this CAM, although dvb-shop states that rev 1.2 is compatible as well.

  My cable provider is not Technisat, but I guess that if Technisat encryption is based on Conax 4.00e then the CAM should be okay. 

  My configuration works in mythtv and (by recollection) mplayer and xine.

  I get the same dmesg output as you for the tt-dvbpci card.



[-- Attachment #1.2: Type: text/html, Size: 3333 bytes --]

[-- Attachment #2: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Any DVB-C tuner with working CAM?

[Rune Evjen]

[-- Attachment #1.1: Type: text/plain, Size: 1873 bytes --]

I use kernel 2.6.27 (amd64 architecture) but have used multiple kernels over
the last year, both amd64 and i386 without problems.

The only problem is that once in while (every month or two maybe ?) I cannot
get lock on any channel and the only way to solve this is to power off the
computer, and power it up again (a restart doesn't help).

Rune
2008/11/14 Tomas Drajsajtl <linux-dvb@drajsajtl.cz>

>  Dear Rune,
> what is your kernel version? I have the same tuner from the same shop but
> the CAM is Technisat. I cannot replace the CAM provided by my cable
> oprerator because they won't pair their Conax card with the CAM like you
> have for me. :-(
> Is it possible that TT 2300-C Premium + Technisat Technicrypt CX
> http://www.technisat.com/index9acb.html?nav=CI_modules,en,68-32 can have
> problems with the linux driver?
>
> Regards,
> Tomas
>
>
> ----- Original Message -----
> *From:* Rune Evjen <rune.evjen@gmail.com>
> *To:* Tomas Drajsajtl <linux-dvb@drajsajtl.cz>
> *Cc:* linux-dvb@linuxtv.org
> *Sent:* Thursday, November 13, 2008 2:56 PM
> *Subject:* Re: [linux-dvb] Any DVB-C tuner with working CAM?
>
> Hi,
>
> I use the TT 2300-C Premium card with a Conax CAM (rev 1.1) - 4.00e and
> this works fine with my cable provider. The CAM was ordered from
> www.dvb-shop.net along with the DVB-C card.
>
> Apparently they only ship rev 1.2 ( (
> http://www.dvbshop.net/product_info.php/info/p20_Conax-CAM
> --Rev--1-2----4-00e.html) now which also supports the bitrates of HDTV,
> but I have not tested this CAM, although dvb-shop states that rev 1.2 is
> compatible as well.
>
> My cable provider is not Technisat, but I guess that if Technisat
> encryption is based on Conax 4.00e then the CAM should be okay.
>
> My configuration works in mythtv and (by recollection) mplayer and xine.
>
> I get the same dmesg output as you for the tt-dvbpci card.
>
>
>
>

[-- Attachment #1.2: Type: text/html, Size: 4898 bytes --]

[-- Attachment #2: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Any DVB-C tuner with working CAM?

[Ernst Persson]

[-- Attachment #1.1: Type: text/plain, Size: 1159 bytes --]

Hi Manu,

saw you were back in action!? Cool! :-)
Could you comment on if it would be possible to make the Mantis 2033(/2040?)
cards work with CI/CAM?

regards
/Ernst Persson

On Sun, Nov 2, 2008 at 22:20, Ruediger Dohmhardt <
ruediger.dohmhardt@freenet.de> wrote:

> Tomas Drajsajtl schrieb:
> > Hello,
> > I have bought and tested two DVB-C cards which are supported according to
> > http://www.linuxtv.org/wiki/index.php/DVB-C_PCI_Cards
> > Both are perfectly working with FTA but none with the CAM.
> >
> > 1. TechnoTrend Premium DVB-C 2300
> >
> TT DVB-C 2300 works fine here with  AlphaCrypt -Light. This card has
> CI/CAM support for several years already.
> And it has worked here for several years with CI/CAM.
>
> The Mantis Chip 2033 does not work with the CAM yet.
>
> The KNC One TV-Station DVB-C Plus works fine with the AlphaCrypt -Light,
> too (Driver Multiproto_plus).
> With the last combination and VDR-1.7 + xineliboutput I can watch Anixe
> HD-TV.
>
>
>
> Ciao Ruediger D.
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>

[-- Attachment #1.2: Type: text/html, Size: 1820 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb