From: Moacyr Prado <mwprado@yahoo.com>
To: linux-media@vger.kernel.org
Subject: Re: Need Some Help to Add a Device
Date: Sat, 28 May 2011 07:21:06 -0700 (PDT) [thread overview]
Message-ID: <492883.34889.qm@web33208.mail.mud.yahoo.com> (raw)
I've seen in kernel code there are tda78271, saa7134 drivers, could anyone to explain if I could add a device sent on last mail?
--- On Fri, 5/27/11, Moacyr Prado <mwprado@yahoo.com> wrote:
> From: Moacyr Prado <mwprado@yahoo.com>
> Subject: Brazilian HDTV device
> To: linux-media@vger.kernel.org
> Date: Friday, May 27, 2011, 9:20 AM
> Hi, I have a board with empia
> chipset. The em28xx driver not load,
> because the device ID is not listed on source(cards.c, I
> guess).
>
> Following bellow
> have some infos from board:
> lsusb:
> Bus 001 Device 004: ID 1b80:e755 Afatech
>
> Opening the device, shows this ic:
>
> empia em2888 d351c-195 727-00ag (em28xx)
> nxp saa7136e/1/g SI5296.1 22 ZSD08411
> NXP TDA 18271??C2 HDC2? (tda18271)
> F JAPAN mb86a20s 0937 M01 E1 (mb86a20s)
>
> but... dmesg shows:
>
> [18373.454136] usb 6-1: USB disconnect, address 2
> [18376.744074] usb 2-1: new high speed USB device using
> ehci_hcd and address 9
> [18376.860283] usb 2-1: New USB device found,
> idVendor=1b80, idProduct=e755
> [18376.860293] usb 2-1: New USB device strings: Mfr=0,
> Product=1, SerialNumber=2
> [18376.860300] usb 2-1: Product: USB 2885 Device
> [18376.860306] usb 2-1: SerialNumber: 1
>
>
> Could The em28xx module (writing some code for me)handle
> this device?
>
> Thanks,
> Moa
>
reply other threads:[~2011-05-28 14:26 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=492883.34889.qm@web33208.mail.mud.yahoo.com \
--to=mwprado@yahoo.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox