Re: Need Some Help to Add a Device

Re: Need Some Help to Add a Device

[Moacyr Prado]

I've seen in kernel code there are tda78271, saa7134 drivers, could anyone to explain if I could add a device sent on last mail?

--- On Fri, 5/27/11, Moacyr Prado <mwprado@yahoo.com> wrote:

> From: Moacyr Prado <mwprado@yahoo.com>
> Subject: Brazilian HDTV device
> To: linux-media@vger.kernel.org
> Date: Friday, May 27, 2011, 9:20 AM
> Hi, I have a board with empia
> chipset. The em28xx driver not load, 
> because the device ID is not listed on source(cards.c, I
> guess). 
> 
> Following bellow 
> have some infos from board:
> lsusb:
> Bus 001 Device 004: ID 1b80:e755 Afatech
> 
> Opening the device, shows this ic:
> 
> empia em2888 d351c-195 727-00ag (em28xx)
> nxp saa7136e/1/g SI5296.1 22 ZSD08411
> NXP TDA 18271??C2 HDC2? (tda18271)
> F JAPAN mb86a20s 0937 M01 E1 (mb86a20s)
> 
> but... dmesg shows:
> 
> [18373.454136] usb 6-1: USB disconnect, address 2
> [18376.744074] usb 2-1: new high speed USB device using
> ehci_hcd and address 9
> [18376.860283] usb 2-1: New USB device found,
> idVendor=1b80, idProduct=e755
> [18376.860293] usb 2-1: New USB device strings: Mfr=0,
> Product=1, SerialNumber=2
> [18376.860300] usb 2-1: Product: USB 2885 Device
> [18376.860306] usb 2-1: SerialNumber: 1
> 
> 
> Could The em28xx module (writing some code for me)handle
> this device?
> 
> Thanks,
> Moa
>