From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mx3.redhat.com (mx3.redhat.com [172.16.48.32]) by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id mB382wNJ011307 for ; Wed, 3 Dec 2008 03:02:58 -0500 Received: from cathcart.site5.com (89.6b.364a.static.theplanet.com [74.54.107.137]) by mx3.redhat.com (8.13.8/8.13.8) with ESMTP id mB382i05032146 for ; Wed, 3 Dec 2008 03:02:44 -0500 Message-ID: <49363D20.60301@compulab.co.il> Date: Wed, 03 Dec 2008 10:02:40 +0200 From: Mike Rapoport MIME-Version: 1.0 To: Guennadi Liakhovetski References: <1227603594-16953-1-git-send-email-mike@compulab.co.il> <492D1A2D.8070701@compulab.co.il> <493242F1.8000605@compulab.co.il> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: video4linux-list@redhat.com Subject: [PATCH 2/2] mt9m111: add support for mt9m112 since sensors seem identical List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: video4linux-list-bounces@redhat.com Errors-To: video4linux-list-bounces@redhat.com List-ID: Update mt9m11 driver and Kconfig Signed-off-by: Mike Rapoport drivers/media/video/Kconfig | 4 ++-- drivers/media/video/mt9m111.c | 16 ++++++++++------ 2 files changed, 12 insertions(+), 8 deletions(-) diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 47102c2..0848032 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -725,10 +725,10 @@ config MT9M001_PCA9536_SWITCH extender to switch between 8 and 10 bit datawidth modes config SOC_CAMERA_MT9M111 - tristate "mt9m111 support" + tristate "mt9m111 and mt9m112 support" depends on SOC_CAMERA && I2C help - This driver supports MT9M111 cameras from Micron + This driver supports MT9M111 and MT9M112 cameras from Micron config SOC_CAMERA_MT9V022 tristate "mt9v022 support" diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c index da0b2d5..9a428b7 100644 --- a/drivers/media/video/mt9m111.c +++ b/drivers/media/video/mt9m111.c @@ -1,5 +1,5 @@ /* - * Driver for MT9M111 CMOS Image Sensor from Micron + * Driver for MT9M111/MT9M112 CMOS Image Sensor from Micron * * Copyright (C) 2008, Robert Jarzmik * @@ -19,7 +19,7 @@ #include /* - * mt9m111 i2c address is 0x5d or 0x48 (depending on SAddr pin) + * mt9m111 and mt9m112 i2c address is 0x5d or 0x48 (depending on SAddr pin) * The platform has to define i2c_board_info and call i2c_register_board_info() */ @@ -841,10 +841,11 @@ static int mt9m111_video_probe(struct soc_camera_device *icd) data = reg_read(CHIP_VERSION); switch (data) { - case 0x143a: + case 0x143a: /* MT9M111 */ mt9m111->model = V4L2_IDENT_MT9M111; - icd->formats = mt9m111_colour_formats; - icd->num_formats = ARRAY_SIZE(mt9m111_colour_formats); + break; + case 0x148c: /* MT9M112 */ + mt9m111->model = V4L2_IDENT_MT9M112; break; default: ret = -ENODEV; @@ -853,6 +854,9 @@ static int mt9m111_video_probe(struct soc_camera_device *icd) goto ei2c; } + icd->formats = mt9m111_colour_formats; + icd->num_formats = ARRAY_SIZE(mt9m111_colour_formats); + dev_info(&icd->dev, "Detected a MT9M111 chip ID 0x143a\n"); ret = soc_camera_video_start(icd); @@ -968,6 +972,6 @@ static void __exit mt9m111_mod_exit(void) module_init(mt9m111_mod_init); module_exit(mt9m111_mod_exit); -MODULE_DESCRIPTION("Micron MT9M111 Camera driver"); +MODULE_DESCRIPTION("Micron MT9M111/MT9M112 Camera driver"); MODULE_AUTHOR("Robert Jarzmik"); MODULE_LICENSE("GPL"); -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list