HVR-4000 need to switch 19/14V

HVR-4000 need to switch 19/14V

[Chris Ruehl]

Dear All,

I run a HVR 4000 in Hong Kong and try to make it run with ALIGA2 on a 
'so called' cheap Sat in my rented flat.
Problem:
When I run the scan <myaligaconfig> no result come out.
I double check with my dreambox - its working
different between dreambox<>HVR4000 dreambox set 19V on the LNB HVR only 
17,8V.

I google around a bit and found a thread where someone set a extra bit 
in the registry (win32) to make the
card set to 19/14V.

Can someone give me a hint which register affected here on the cx88??? 
code -  to make it possible for me
testing/patching.

thank  you.
Chris

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

Re: HVR-4000 need to switch 19/14V

[Chris Ruehl]

Chris Ruehl wrote:
> Dear All,
>
> I run a HVR 4000 in Hong Kong and try to make it run with ALIGA2 on a 
> 'so called' cheap Sat in my rented flat.
> Problem:
> When I run the scan <myaligaconfig> no result come out.
> I double check with my dreambox - its working
> different between dreambox<>HVR4000 dreambox set 19V on the LNB HVR 
> only 17,8V.
>
> I google around a bit and found a thread where someone set a extra bit 
> in the registry (win32) to make the
> card set to 19/14V.
>
> Can someone give me a hint which register affected here on the cx88??? 
> code -  to make it possible for me
> testing/patching.
>
> thank  you.
> Chris
>
BTW: The info I found while search the WWW.

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HCW88BDA\Parameters]
"LNBVoltage_Ctrl"=dword:00000005
   
; Bit 0: (+1) - disables dynamic current limiting
; Bit 1: (+2) - makes output voltage 13/18V instead of 14/19V
; Bit 2: (+4) - prevents LNB power from being disabled


--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list