From: Pavel Hofman <pavel.hofman@insite.cz>
To: BOUWSMA Barry <freebeer.bouwsma@gmail.com>
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] Technisat HD2 cannot szap/scan
Date: Mon, 08 Dec 2008 19:43:08 +0100 [thread overview]
Message-ID: <493D6ABC.5060400@insite.cz> (raw)
In-Reply-To: <alpine.DEB.2.00.0812071856470.11349@ybpnyubfg.ybpnyqbznva>
BOUWSMA Barry napsal(a):
> On Sun, 7 Dec 2008, Pavel Hofman wrote:
>
> Sorry if I'm missing something, as I haven't been paying
> too much attention, but...
>
>
>> I added a few free-to-air channels I was able to tune in WinXP to
>> channels.conf:
>>
>> Entertainment:12012:v:0:27500:2582:2581:8037
>> SkyNews:12207:v:0:27500:514:645:4707
>> WineTV:11555:h:1:27500:2372:2374:50435
>> AvaTest:11555:h:1:27500:2329:2330:50446
>> Vegas:11515:h:1:27500:3568:3567:8035
>> Faith:11515:h:1:27500:2375:2376:50455
>>
>> The first two on LNB0, the rest on LNB1.
>
> I'm sorry, but these are all programmes which are sent
> over the 28E position (Astra2/Eurobird), for the UK.
> All of them.
>
> Do you have two dishes pointed to the same satellite
> position, connected to LNBs 0 and 1 ?
>
>
>> Perhaps it is correct and the channels I checked broadcast no stream at
>> this time. Since scan2 keeps failing, please is there a place to
>> download recent channels.conf for Astra 19.2E so that I can test on many
>> more channels?
>
> And now you mention Astra 19E2, so I am very confused.
>
> I would expect you should be able to receive 23E5 for
> the czech broadcasts -- but please explain your setup,
> which satellites you expect to see at which LNB position.
>
>
> Many of the frequencies and polarisations are re-used
> among different satellite positions -- that is the case
> for 28E and 19E from 10714 up to 10964 (at 28E, the
> frequencies above this have generally not been activated
> yet) and other frequencies *not* on Eurobird, which
> generally seem to share the same frequency both hor.
> and vertically.
>
> That is, you will often get carrier for the same tuning
> parameters from different satellites.
>
>
> So, please ease my mind, and tell me what you expect to
> receive on LNBs 0 and 1 (and 2 and up if you have them).
>
>
> I could point you to an old-style channels.conf which I
> have for 19E2, as well as 28E, 23E5, and 13E, if you
> still need them, but I first want to be sure they'll help
>
>
> thanks
> barry bouwsma
Hi Barry,
Thanks a lot for your offer. I have a dual LNB (4 degrees apart), LNB0
points to Astra19.2E, LNB1 points to Astra23.5E. I am able to tune both
satellites now, nevertheless your channel.conf's for them would probably
help.
Thanks,
Pavel.
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next prev parent reply other threads:[~2008-12-08 18:43 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-01 22:37 [linux-dvb] Technisat HD2 cannot szap/scan Pavel Hofman
2008-12-02 6:13 ` Michel Verbraak
2008-12-02 22:31 ` Pavel Hofman
[not found] ` <c74595dc0812022332s2ef51d1cn907cbe5e4486f496@mail.gmail.com>
[not found] ` <c74595dc0812022347j37e83279mad4f00354ae0e611@mail.gmail.com>
2008-12-03 23:24 ` Pavel Hofman
2008-12-05 6:22 ` [linux-dvb] Technisat HD2 cannot szap/scan (possible diseqc problem) Michel Verbraak
2008-12-05 9:00 ` Alex Betis
2008-12-06 17:07 ` Hans Werner
2008-12-06 17:28 ` Alex Betis
2008-12-06 17:37 ` Hans Werner
2008-12-09 15:34 ` [linux-dvb] [PATCH] Technisat HD2 cannot szap/scan Hans Werner
2008-12-15 14:30 ` [linux-dvb] Mantis Bug (was Technisat HD2 cannot szap/scan) Hans Werner
2009-01-04 19:24 ` [linux-dvb] [PATCH] " Hans Werner
[not found] ` <c74595dc0901042308j24fcbdebq3d6c51d2c68c8a73@mail.gmail.com>
2009-01-05 15:10 ` [linux-dvb] [PATCH] stb6100: stb6100_init fix Hans Werner
[not found] ` <b8a3b1ca0901051233u635b6d14u33d9d3b2f3d1ef61@mail.gmail.com>
2009-01-05 20:37 ` [linux-dvb] Fwd: " Tomáš Skočdopole
2009-01-06 17:21 ` [linux-dvb] " Newsy Paper
2009-01-05 16:45 ` [linux-dvb] [PATCH] Mantis Bug (was Technisat HD2 cannot szap/scan) gimli
2009-01-05 17:36 ` Hans Werner
2009-01-05 18:04 ` gimli
2009-01-05 18:09 ` gimli
2009-02-05 12:34 ` Hans Werner
2009-02-06 7:14 ` Alexey Klimov
2009-02-06 11:47 ` Hans Werner
2008-12-07 15:06 ` [linux-dvb] Technisat HD2 cannot szap/scan Pavel Hofman
2008-12-07 18:08 ` BOUWSMA Barry
2008-12-08 18:43 ` Pavel Hofman [this message]
2008-12-09 6:38 ` BOUWSMA Barry
2008-12-08 6:52 ` Michel Verbraak
2008-12-08 18:54 ` Pavel Hofman
[not found] ` <c74595dc0812070822p73746bdel9894de34c87a733f@mail.gmail.com>
2008-12-08 18:39 ` Pavel Hofman
2008-12-08 19:53 ` Alex Betis
2008-12-08 20:10 ` BOUWSMA Barry
2008-12-08 22:19 ` Pavel Hofman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=493D6ABC.5060400@insite.cz \
--to=pavel.hofman@insite.cz \
--cc=freebeer.bouwsma@gmail.com \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).