From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from bobrnet.cust.inethome.cz ([88.146.180.6] helo=mailserver.bobrnet.net) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1L9l4e-0003yx-NB for linux-dvb@linuxtv.org; Mon, 08 Dec 2008 19:43:17 +0100 Message-ID: <493D6ABC.5060400@insite.cz> Date: Mon, 08 Dec 2008 19:43:08 +0100 From: Pavel Hofman MIME-Version: 1.0 To: BOUWSMA Barry References: <49346726.7010303@insite.cz> <4934D218.4090202@verbraak.org> <4935B72F.1000505@insite.cz> <49371511.1060703@insite.cz> <493BE666.8030007@insite.cz> In-Reply-To: Cc: linux-dvb@linuxtv.org Subject: Re: [linux-dvb] Technisat HD2 cannot szap/scan List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: BOUWSMA Barry napsal(a): > On Sun, 7 Dec 2008, Pavel Hofman wrote: > > Sorry if I'm missing something, as I haven't been paying > too much attention, but... > > >> I added a few free-to-air channels I was able to tune in WinXP to >> channels.conf: >> >> Entertainment:12012:v:0:27500:2582:2581:8037 >> SkyNews:12207:v:0:27500:514:645:4707 >> WineTV:11555:h:1:27500:2372:2374:50435 >> AvaTest:11555:h:1:27500:2329:2330:50446 >> Vegas:11515:h:1:27500:3568:3567:8035 >> Faith:11515:h:1:27500:2375:2376:50455 >> >> The first two on LNB0, the rest on LNB1. > > I'm sorry, but these are all programmes which are sent > over the 28E position (Astra2/Eurobird), for the UK. > All of them. > > Do you have two dishes pointed to the same satellite > position, connected to LNBs 0 and 1 ? > > >> Perhaps it is correct and the channels I checked broadcast no stream at >> this time. Since scan2 keeps failing, please is there a place to >> download recent channels.conf for Astra 19.2E so that I can test on many >> more channels? > > And now you mention Astra 19E2, so I am very confused. > > I would expect you should be able to receive 23E5 for > the czech broadcasts -- but please explain your setup, > which satellites you expect to see at which LNB position. > > > Many of the frequencies and polarisations are re-used > among different satellite positions -- that is the case > for 28E and 19E from 10714 up to 10964 (at 28E, the > frequencies above this have generally not been activated > yet) and other frequencies *not* on Eurobird, which > generally seem to share the same frequency both hor. > and vertically. > > That is, you will often get carrier for the same tuning > parameters from different satellites. > > > So, please ease my mind, and tell me what you expect to > receive on LNBs 0 and 1 (and 2 and up if you have them). > > > I could point you to an old-style channels.conf which I > have for 19E2, as well as 28E, 23E5, and 13E, if you > still need them, but I first want to be sure they'll help > > > thanks > barry bouwsma Hi Barry, Thanks a lot for your offer. I have a dual LNB (4 degrees apart), LNB0 points to Astra19.2E, LNB1 points to Astra23.5E. I am able to tune both satellites now, nevertheless your channel.conf's for them would probably help. Thanks, Pavel. _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb