[linux-dvb] can you confirm that the nova-td-500 is supported

[linux-dvb] can you confirm that the nova-td-500 is supported

[Simon Kenyon]

just bought what i though was a t-500 and when i opened the box it 
contained a td-500

the wiki says (in bright bold colours) that it is not (and never would 
be) supported

however, from looking at the mailing list it appear to be supported

i can of course take it out of the sealed bag and try

however, to preserve any change of swapping it i thought i would ask 
here first

regards
--
simon

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] can you confirm that the nova-td-500 is supported

[Jyrki Niskala]

Simon Kenyon wrote:
> just bought what i though was a t-500 and when i opened the box it 
> contained a td-500
>
> the wiki says (in bright bold colours) that it is not (and never would 
> be) supported
>
> however, from looking at the mailing list it appear to be supported
>
> i can of course take it out of the sealed bag and try
>
> however, to preserve any change of swapping it i thought i would ask 
> here first
>
> regards
> --
> simon
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>   
Hi

For me it's still kind of 80% working status, it works on 4 of 5 muxes 
(read more about it here: 
http://www.linuxtv.org/pipermail/linux-dvb/2008-November/030601.html).
I been tracking the problem from time to time by comparing usbsnoop logs 
from the windows driver. Windows driver works on all 5 muxes. For the 
moment I have found some differences in demod driver (dib7000p) and the 
tuner driver (dib0700). I will have some more time during Christmas 
holiday to investigate it further.

Regards, Jyrki

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] can you confirm that the nova-td-500 is supported

[Michael Krufky]

On Fri, Dec 19, 2008 at 7:45 AM, Simon Kenyon <simon@koala.ie> wrote:
> just bought what i though was a t-500 and when i opened the box it
> contained a td-500
>
> the wiki says (in bright bold colours) that it is not (and never would
> be) supported
>
> however, from looking at the mailing list it appear to be supported
>
> i can of course take it out of the sealed bag and try
>
> however, to preserve any change of swapping it i thought i would ask
> here first

There is a very old version of the board that is not supported.  There
are very few of those boards around nowadays.

The new Nova-TD-500 is definitely supported.  Look for the 84xxx model
number -- that is the new revision.  This is the one that you are
likely to have, if you recently purchased that board.

Regards,

Mike

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] can you confirm that the nova-td-500 is supported

[Simon Kenyon]

Michael Krufky wrote:
> On Fri, Dec 19, 2008 at 7:45 AM, Simon Kenyon <simon@koala.ie> wrote:
>   
>> just bought what i though was a t-500 and when i opened the box it
>> contained a td-500
>>
>> the wiki says (in bright bold colours) that it is not (and never would
>> be) supported
>>
>> however, from looking at the mailing list it appear to be supported
>>
>> i can of course take it out of the sealed bag and try
>>
>> however, to preserve any change of swapping it i thought i would ask
>> here first
>>     
>
> There is a very old version of the board that is not supported.  There
> are very few of those boards around nowadays.
>
> The new Nova-TD-500 is definitely supported.  Look for the 84xxx model
> number -- that is the new revision.  This is the one that you are
> likely to have, if you recently purchased that board.
>
> Regards,
>
> Mike
>
>   
thanks for that
the box says:

WinTV-NOVA-T-500
model 289
S-289-V2.1-UK

and the board says:

840000-04 LF

with the markings on the tuner can:

WinTV-NOVA-TD-500
DVB-T
84109 LF
REV D1F4

o hopefully i am ok
will install it tomorrow and report back

by the way, what do JP1 and JP2 do?

sthanks for the help
--
simon


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] can you confirm that the nova-td-500 is supported

[Michael Krufky]

Simon Kenyon wrote:
> Michael Krufky wrote:
>> On Fri, Dec 19, 2008 at 7:45 AM, Simon Kenyon <simon@koala.ie> wrote:
>>  
>>> just bought what i though was a t-500 and when i opened the box it
>>> contained a td-500
>>>
>>> the wiki says (in bright bold colours) that it is not (and never would
>>> be) supported
>>>
>>> however, from looking at the mailing list it appear to be supported
>>>
>>> i can of course take it out of the sealed bag and try
>>>
>>> however, to preserve any change of swapping it i thought i would ask
>>> here first
>>>     
>>
>> There is a very old version of the board that is not supported.  There
>> are very few of those boards around nowadays.
>>
>> The new Nova-TD-500 is definitely supported.  Look for the 84xxx model
>> number -- that is the new revision.  This is the one that you are
>> likely to have, if you recently purchased that board.
>>
>> Regards,
>>
>> Mike
>>
>>   
> thanks for that
> the box says:
>
> WinTV-NOVA-T-500
> model 289
> S-289-V2.1-UK
>
> and the board says:
>
> 840000-04 LF
>
> with the markings on the tuner can:
>
> WinTV-NOVA-TD-500
> DVB-T
> 84109 LF
> REV D1F4
>
> o hopefully i am ok
> will install it tomorrow and report back
>
> by the way, what do JP1 and JP2 do?
>
> sthanks for the help

Simon,

I'm just telling you that the device is well supported under recent 
Linux kernels.  For vendor-specific information about the product, 
you'll have to contact Hauppauge Technical Support.

They have phone numbers and email posted on the Hauppauge web site.

http://www.hauppauge.com

Good Luck,

Mike

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] can you confirm that the nova-td-500 is supported

[Jyrki Niskala]

Jyrki Niskala wrote:
> Simon Kenyon wrote:
>   
>> just bought what i though was a t-500 and when i opened the box it 
>> contained a td-500
>>
>> the wiki says (in bright bold colours) that it is not (and never would 
>> be) supported
>>
>> however, from looking at the mailing list it appear to be supported
>>
>> i can of course take it out of the sealed bag and try
>>
>> however, to preserve any change of swapping it i thought i would ask 
>> here first
>>
>> regards
>> --
>> simon
>>
>> _______________________________________________
>> linux-dvb mailing list
>> linux-dvb@linuxtv.org
>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>>   
>>     
> Hi
>
> For me it's still kind of 80% working status, it works on 4 of 5 muxes 
> (read more about it here: 
> http://www.linuxtv.org/pipermail/linux-dvb/2008-November/030601.html).
> I been tracking the problem from time to time by comparing usbsnoop logs 
> from the windows driver. Windows driver works on all 5 muxes. For the 
> moment I have found some differences in demod driver (dib7000p) and the 
> tuner driver (dib0700). I will have some more time during Christmas 
> holiday to investigate it further.
>
> Regards, Jyrki
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>   
Hi,

Your post got me working on my problems, and the good thing is that I 
finally got  it working by using "auto guard interval" instead of  
default "1/8 guard interval".

Merry  Christmas

/ Jyrki

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] can you confirm that the nova-td-500 is supported

[Simon Kenyon]

Michael Krufky wrote:
> On Fri, Dec 19, 2008 at 7:45 AM, Simon Kenyon <simon@koala.ie> wrote:
>   
>> just bought what i though was a t-500 and when i opened the box it
>> contained a td-500
>>
>> the wiki says (in bright bold colours) that it is not (and never would
>> be) supported
>>
>> however, from looking at the mailing list it appear to be supported
>>
>> i can of course take it out of the sealed bag and try
>>
>> however, to preserve any change of swapping it i thought i would ask
>> here first
>>     
>
> There is a very old version of the board that is not supported.  There
> are very few of those boards around nowadays.
>
> The new Nova-TD-500 is definitely supported.  Look for the 84xxx model
> number -- that is the new revision.  This is the one that you are
> likely to have, if you recently purchased that board.
>
> Regards,
>
> Mike
>
>   
well i have been trying to get this to work for a few days now. this is 
what appears in the kernel log:

dvb-usb: found a 'Hauppauge Nova-TD-500 (84xxx)' in cold state, will try 
to load a firmware
firmware: requesting dvb-usb-dib0700-1.20.fw
[snip]
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[snip]
dib0700: firmware started successfully.
dvb-usb: found a 'Hauppauge Nova-TD-500 (84xxx)' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software 
demuxer.
DVB: registering new adapter (Hauppauge Nova-TD-500 (84xxx))
ep 0 read error (status = -32)
I2C read failed on address 41
ep 0 read error (status = -32)
I2C read failed on address 40
DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
DiB0070: successfully identified
dvb-usb: will pass the complete MPEG2 transport stream to the software 
demuxer.
DVB: registering new adapter (Hauppauge Nova-TD-500 (84xxx))
DVB: registering adapter 1 frontend 0 (DiBcom 7000PC)...
DiB0070: successfully identified
dvb-usb: Hauppauge Nova-TD-500 (84xxx) successfully initialized and 
connected.
usbcore: registered new interface driver dvb_usb_dib0700

i can tzap to a channel, but get nothing when i try to read from 
/dev/dvb/adapter0/dvr0

also i get errors from w_scan:

tune to: :738000:I999B8C999D999M999T999G999Y999:T:27500:
Info: filter timeout pid 0x0011
Info: filter timeout pid 0x0000
Info: filter timeout pid 0x0010
tune to: :770000:I999B8C999D999M999T999G999Y999:T:27500:
Info: filter timeout pid 0x0011
Info: filter timeout pid 0x0000
Info: filter timeout pid 0x0010
tune to: :794000:I999B8C999D999M999T999G999Y999:T:27500:
----------no signal----------
tune to: :794000:I999B8C999D999M999T999G999Y999:T:27500: (no signal)
----------no signal----------
tune to: :818000:I999B8C999D999M999T999G999Y999:T:27500:
Info: filter timeout pid 0x0011
Info: filter timeout pid 0x0000
Info: filter timeout pid 0x0010
dumping lists (0 services)
Done.






_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb