From: Artem Makhutov <artem@makhutov.org>
To: BOUWSMA Barry <freebeer.bouwsma@gmail.com>
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] How to stream DVB-S2 channels over network?
Date: Mon, 22 Dec 2008 12:18:57 +0100 [thread overview]
Message-ID: <494F77A1.1040209@makhutov.org> (raw)
In-Reply-To: <alpine.DEB.2.00.0812211542250.22383@ybpnyubfg.ybpnyqbznva>
Hi,
BOUWSMA Barry schrieb:
> On Sun, 21 Dec 2008, Artem Makhutov wrote:
>
>>> Use the `-o:' option of `dvbstream' to write to a file,
>>> then see if this file is corrupted or damaged. If this
>>> is so, then case 1 above would be correct.
>
>> Everything looks like my SkyStar HD/TT-3200 is producing a little bit
>> currupt stream for DVB-S2 under linux. DVB-S looks prette good.
>> I will try to playback the recorded stream under Windows
>> today afternoon.
>
> Hi, me again :-) Sorry to be writing so much today...
No problem :)
> I actually do not know if you are receiving ASTRA HD from
> 19E2, or from elsewhere, and I now realize that earlier,
> I assumed that you did...
My dish is pointing to Astra 19.2E.
> As I noted in my last mail, please try `mplayer -vo null
> etc.' to detect corrupted video. The `-nosound' option
> means that every frame will be checked, no matter how
> slow my^H^H your machine.
>
> In case the bandwidth is of concern, because I do not
> know what to expect from HD DVB-S2 transponders...
>
> I'm assuming, from your headers, you're somewhere in
> germany -- if you are within the Astra 2D footprint at
> 28E2, meaning, the west or northwest, you can receive
> the BBC-HD signal with a reasonable dish -- this will
> fill about 7 to 8GB per hour on disk, and is sent via
> DVB-S at present. Around Berlin, you'll need perhaps a
> 2 metre dish. If you can tune it, this will give a DVB-S
> reference at a decent bitrate, probably similar to ASTRA
> HD.
>
> Alternatively, on DVB-S, Eins Festival HD starts in less
> than 24 hours; the bitrate is not so high -- I have some
> files from the past Easter holiday that require, for
> example, 21GB from somtime after 13h to just after 17h,
> so a bit better than good quality SD video, but slightly
> less than the BBC-HD stream. Both these are H.264.
>
> With a few hours of suitable HD recording, you can then
> definitively say, oh yeah, the -S2 transport streams are
> indeed corrupt and the -S streams perfect, or not, or
> something. That would be very useful, if it isn't
> already widely known.
Yes, I will try it out today.
Regards, Artem
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next prev parent reply other threads:[~2008-12-22 11:19 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-20 22:45 [linux-dvb] How to stream DVB-S2 channels over network? Artem Makhutov
2008-12-21 2:29 ` BOUWSMA Barry
2008-12-21 2:44 ` hermann pitton
2008-12-21 13:59 ` Artem Makhutov
2008-12-21 14:39 ` BOUWSMA Barry
2008-12-22 11:26 ` Artem Makhutov
2008-12-21 22:41 ` hermann pitton
2008-12-21 14:04 ` Artem Makhutov
2008-12-21 14:58 ` BOUWSMA Barry
2008-12-22 11:18 ` Artem Makhutov [this message]
2008-12-21 13:15 ` Michel Verbraak
2008-12-21 13:26 ` Artem Makhutov
2008-12-21 14:16 ` BOUWSMA Barry
2008-12-22 11:16 ` Artem Makhutov
2008-12-30 14:45 ` Nico Sabbi
[not found] ` <854d46170812201646u3414788dh6cbbe6eb9c9ba8ca@mail.gmail.com>
2008-12-21 13:51 ` Artem Makhutov
2009-01-01 18:53 ` Brice DUBOST
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=494F77A1.1040209@makhutov.org \
--to=artem@makhutov.org \
--cc=freebeer.bouwsma@gmail.com \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox