From: kmieciu <kmieciu@jabster.pl>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] Avermedia AVerTV GO 007 FM don't work with kernels >= 2.6.27
Date: Sat, 27 Dec 2008 19:57:34 +0100 [thread overview]
Message-ID: <49567A9E.8080700@jabster.pl> (raw)
Hi
I have Avermedia AVerTV GO 007 FM PCI card (1461:f31d). Card works fine with kernel 2.6.24. There was tuner detection bug in kernels 2.6.25 and 2.6.26 which was fixed in 2.6.27 but my card still don't work with 2.6.27 and 2.6.28 kernels - no video and no audio. I load module saa7134 with card=57 tuner=54 options. I'm using tvtime.
Here goes dmesg for working and not working kernels and lspci:
Linux version 2.6.24-gentoo-r8 (root@kmieciu) (gcc version 4.2.4 (Gentoo 4.2.4 p1.0)) #1 SMP PREEMPT Thu Jun 19 19:42:04 CEST 2008
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
saa7133[0]: found at 0000:01:08.0, rev: 209, irq: 11, latency: 32, mmio: 0xfb000000
saa7133[0]: subsystem: 1461:f31d, board: Avermedia AVerTV GO 007 FM [card=57,insmod option]
saa7133[0]: board init: gpio is 807c8
input: saa7134 IR (Avermedia AVerTV GO as /devices/pci0000:00/0000:00:06.0/0000:01:08.0/input/input2
saa7133[0]: i2c eeprom 00: 61 14 1d f3 ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: ff d2 fe ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
saa7134 ALSA driver for DMA sound loaded
saa7133[0]/alsa: saa7133[0] at 0xfb000000 irq 11 registered as card 1
tuner 2-004b: chip found @ 0x96 (saa7133[0])
tda8290 2-004b: setting tuner address to 61
tuner 2-004b: type set to tda8290+75a
tda8290 2-004b: setting tuner address to 61
tuner 2-004b: type set to tda8290+75a
Linux version 2.6.28-gentoo (root@kmieciu) (gcc version 4.3.2 (Gentoo 4.3.2-r1 p1.3, pie-10.1.3) ) #1 SMP PREEMPT Sat Dec 27 17:08:17 CET 2008
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
saa7134 0000:01:08.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
saa7133[0]: found at 0000:01:08.0, rev: 209, irq: 11, latency: 32, mmio: 0xfb000000
saa7133[0]: subsystem: 1461:f31d, board: Avermedia AVerTV GO 007 FM [card=57,insmod option]
saa7133[0]: board init: gpio is 807c8
input: saa7134 IR (Avermedia AVerTV GO as /devices/pci0000:00/0000:00:06.0/0000:01:08.0/input/input3
saa7133[0]: i2c eeprom 00: 61 14 1d f3 ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: ff d2 fe ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner' 2-004b: chip found @ 0x96 (saa7133[0])
tda829x 2-004b: setting tuner address to 61
DVB: Unable to find symbol tda827x_attach()
tda829x 2-004b: type set to tda8290+75a
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
saa7134 ALSA driver for DMA sound loaded
saa7133[0]/alsa: saa7133[0] at 0xfb000000 irq 11 registered as card 1
01:08.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
Subsystem: Avermedia Technologies Inc Device [1461:f31d]
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at fb000000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2
Kernel driver in use: saa7134
Kernel modules: saa7134
With 2.6.24 kernel I load tuner module manually after saa7134 and saa7134_alsa. With 2.6.28 kernel tuner module is loaded automatically by saa7134 module.
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next reply other threads:[~2008-12-27 18:58 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-27 18:57 kmieciu [this message]
2008-12-28 3:52 ` [linux-dvb] Avermedia AVerTV GO 007 FM don't work with kernels >= 2.6.27 hermann pitton
2008-12-28 10:43 ` kmieciu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49567A9E.8080700@jabster.pl \
--to=kmieciu@jabster.pl \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox