public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: Ruediger Dohmhardt <ruediger.dohmhardt@freenet.de>
To: Manu Abraham <abraham.manu@gmail.com>
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] Mantis users
Date: Sat, 10 Jan 2009 10:51:07 +0100	[thread overview]
Message-ID: <49686F8B.4030007@freenet.de> (raw)
In-Reply-To: <1a297b360901091300w6078f926p5efaadeb912e8c03@mail.gmail.com>

[-- Attachment #1: Type: text/plain, Size: 1508 bytes --]

Manu Abraham schrieb:
> Hi,
>
> Can you all please provide me the following information for the Mantis
> / Hopper bridge
> based cards that you have in the following manner ?
>
> 1) Card Name (As advertised on the cardboard box):
Twinhan AD-CP300
(I just checked www.twinhan.com and found out this card is not sold anymore)
>
> 2) lspci -vvn:
02:01.0 0480: 1822:4e35 (rev 01)
        Subsystem: 1822:0008
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (2000ns min, 63750ns max)
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at dfeff000 (32-bit, prefetchable) [size=4K]
        Kernel driver in use: Mantis
        Kernel modules: mantis

>
> 3) Chips on the card if you know them (only the basic chip description
> is required,
> not the complete batch no. etc)
I'm not sure whether I have the tda10021 tda10023, but I never had any
problems with misdetection of frontend.
My (or your) driver from

http://jusst.de/hg/mantis

has always worked fine.


>
>
> Regards,
> Manu
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux-media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb


[-- Attachment #2: outputFrom_lspci_vvn.txt --]
[-- Type: text/plain, Size: 10038 bytes --]

00:00.0 0600: 1002:5950 (rev 10)
	Subsystem: 1002:5950
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0

00:02.0 0604: 1002:5a34 (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: fa700000-fe7fffff
	Prefetchable memory behind bridge: 00000000bfe00000-00000000dfdfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:11.0 0101: 1002:437a (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: 1462:7141
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 23
	Region 0: I/O ports at bc00 [size=8]
	Region 1: I/O ports at b800 [size=4]
	Region 2: I/O ports at b400 [size=8]
	Region 3: I/O ports at b000 [size=4]
	Region 4: I/O ports at ac00 [size=16]
	Region 5: Memory at febffc00 (32-bit, non-prefetchable) [size=512]
	Expansion ROM at feb00000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: sata_sil
	Kernel modules: ide-pci-generic, ata_generic, pata_acpi, sata_sil

00:12.0 0101: 1002:4379 (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: 1462:7141
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 22
	Region 0: I/O ports at a800 [size=8]
	Region 1: I/O ports at a400 [size=4]
	Region 2: I/O ports at a000 [size=8]
	Region 3: I/O ports at 9c00 [size=4]
	Region 4: I/O ports at 9800 [size=16]
	Region 5: Memory at febff800 (32-bit, non-prefetchable) [size=512]
	Expansion ROM at fea80000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: sata_sil
	Kernel modules: ide-pci-generic, ata_generic, pata_acpi, sata_sil

00:13.0 0c03: 1002:4374 (prog-if 10 [OHCI])
	Subsystem: 1462:7145
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:13.1 0c03: 1002:4375 (prog-if 10 [OHCI])
	Subsystem: 1462:7145
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:13.2 0c03: 1002:4373 (prog-if 20 [EHCI])
	Subsystem: 1462:7145
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:14.0 0c05: 1002:4372 (rev 11)
	Subsystem: 1462:7145
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Region 0: I/O ports at 0b00 [size=16]
	Region 1: Memory at 88000000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c-piix4

00:14.1 0101: 1002:4376 (prog-if 82 [Master PriP])
	Subsystem: 1462:7145
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at ff00 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: pata_atiixp
	Kernel modules: ide-pci-generic, atiixp, ata_generic, pata_acpi, pata_atiixp

00:14.3 0601: 1002:4377
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:14.4 0604: 1002:4371 (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
	I/O behind bridge: 00008000-00008fff
	Memory behind bridge: fe800000-fe8fffff
	Prefetchable memory behind bridge: dfe00000-dfefffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:18.0 0600: 1022:1100
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 0600: 1022:1101
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 0600: 1022:1102
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 0600: 1022:1103
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Kernel driver in use: k8temp
	Kernel modules: k8temp

01:00.0 0300: 10de:0140 (rev a2) (prog-if 00 [VGA controller])
	Subsystem: 1458:3126
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
	[virtual] Expansion ROM at fe7e0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nvidia
	Kernel modules: nvidia, nvidiafb

02:01.0 0480: 1822:4e35 (rev 01)
	Subsystem: 1822:0008
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (2000ns min, 63750ns max)
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at dfeff000 (32-bit, prefetchable) [size=4K]
	Kernel driver in use: Mantis
	Kernel modules: mantis

02:02.0 0401: 1412:1724 (rev 01)
	Subsystem: 1412:3630
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 22
	Region 0: I/O ports at 8c00 [size=32]
	Region 1: I/O ports at 8800 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: ICE1724
	Kernel modules: snd-ice1724

02:03.0 0200: 10ec:8139 (rev 10)
	Subsystem: 1462:145c
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (8000ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 23
	Region 0: I/O ports at 8400 [size=256]
	Region 1: Memory at fe8fe800 (32-bit, non-prefetchable) [size=256]
	Expansion ROM at dfe00000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: 8139too
	Kernel modules: 8139too, 8139cp

02:04.0 0c00: 1106:3044 (rev 80) (prog-if 10 [OHCI])
	Subsystem: 1462:145d
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (8000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at fe8fe000 (32-bit, non-prefetchable) [size=2K]
	Region 1: I/O ports at 8000 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: ohci1394
	Kernel modules: ohci1394


[-- Attachment #3: Type: text/plain, Size: 228 bytes --]

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

  parent reply	other threads:[~2009-01-10  9:51 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-01-09 21:00 [linux-dvb] Mantis users Manu Abraham
2009-01-09 21:36 ` Bernhard Stegmaier
2009-01-09 22:46 ` Hans Werner
2009-01-09 23:49   ` hermann pitton
2009-01-10  1:12 ` Carl Oscar Ejwertz
2009-01-10  7:42 ` Thomas Müller
2009-01-10  9:51 ` Ruediger Dohmhardt [this message]
2009-01-10 10:13 ` Hans Bergersen
2009-01-10 10:33 ` Anssi Kolehmainen
2009-01-10 12:06 ` Rudy Zijlstra
2009-01-11 14:49 ` Philipp Kolmann
2009-01-12  7:58 ` Chris Ariyo
     [not found] <mailman.26.1231583624.829.linux-dvb@linuxtv.org>
2009-01-10 12:53 ` Mårten Gustafsson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49686F8B.4030007@freenet.de \
    --to=ruediger.dohmhardt@freenet.de \
    --cc=abraham.manu@gmail.com \
    --cc=linux-dvb@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox