[linux-dvb] Mantis users

[linux-dvb] Mantis users

[Manu Abraham]

[-- Attachment #1.1: Type: text/plain, Size: 345 bytes --]

Hi,

Can you all please provide me the following information for the Mantis /
Hopper bridge
based cards that you have in the following manner ?

1) Card Name (As advertised on the cardboard box):

2) lspci -vvn:

3) Chips on the card if you know them (only the basic chip description is
required,
not the complete batch no. etc)


Regards,
Manu

[-- Attachment #1.2: Type: text/html, Size: 424 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Mantis users

[Bernhard Stegmaier]

Hi,

On 09.01.2009, at 22:00, Manu Abraham wrote:

> Hi,
>
> Can you all please provide me the following information for the  
> Mantis / Hopper bridge
> based cards that you have in the following manner ?
>
> 1) Card Name (As advertised on the cardboard box):
TechniSat SkyStar HD 2
http://www.technisat.de/indexe33d.html?nav=PC_Produkte,de,76-215

> 2) lspci -vvn:
htpc ~ # lspci -vvn
00:00.0 0600: 8086:2e20 (rev 03)
	Subsystem: 1458:5000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-  
<TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information <?>
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp

00:02.0 0300: 8086:2e22 (rev 03) (prog-if 00 [VGA controller])
	Subsystem: 1458:d000
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-  
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 379
	Region 0: Memory at e1000000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at e200 [size=8]
	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-  
Queue=0/0 Enable+
		Address: fee0100c  Data: 41a1
	Capabilities: [d0] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA  
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [a4] PCIe advanced features <?>

00:02.1 0380: 8086:2e23 (rev 03)
	Subsystem: 1458:d000
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-  
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at e1400000 (64-bit, non-prefetchable) [size=1M]
	Capabilities: [d0] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA  
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1a.0 0c03: 8086:3a37 (prog-if 00 [UHCI])
	Subsystem: 1458:5004
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-  
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at e600 [size=32]
	Capabilities: [50] PCIe advanced features <?>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1a.1 0c03: 8086:3a38 (prog-if 00 [UHCI])
	Subsystem: 1458:5004
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-  
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 21
	Region 4: I/O ports at e000 [size=32]
	Capabilities: [50] PCIe advanced features <?>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1a.2 0c03: 8086:3a39 (prog-if 00 [UHCI])
	Subsystem: 1458:5004
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-  
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at e100 [size=32]
	Capabilities: [50] PCIe advanced features <?>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1a.7 0c03: 8086:3a3c (prog-if 20 [EHCI])
	Subsystem: 1458:5006
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-  
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at e1804000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA  
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1b.0 0403: 8086:3a3e
	Subsystem: 1458:a102
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-  
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at e1800000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot 
+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+  
Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI  
00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE- FLReset+
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0  
<64ns, L1 <1us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive-  
BWMgmt- ABWMgmt-
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [130] Root Complex Link <?>
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel

00:1c.0 0604: 8086:3a40 (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-  
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-  
<TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #1, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <1us,  
L1 <4us
			ClockPM- Suprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive-  
BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
			Slot # 10, PowerLimit 10.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-  
LinkChg-
			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-  
CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-  
Queue=0/0 Enable+
		Address: fee0100c  Data: 4159
	Capabilities: [90] Subsystem: 1458:5001
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot 
+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [180] Root Complex Link <?>
	Kernel driver in use: pcieport-driver

00:1c.5 0604: 8086:3a4a (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-  
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: e0000000-e0ffffff
	Prefetchable memory behind bridge: 00000000e1500000-00000000e15fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-  
<TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #6, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0  
<256ns, L1 <4us
			ClockPM- Suprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+  
BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
			Slot # 15, PowerLimit 10.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-  
LinkChg-
			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet+ LinkState+
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-  
CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-  
Queue=0/0 Enable+
		Address: fee0100c  Data: 4161
	Capabilities: [90] Subsystem: 1458:5001
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot 
+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [180] Root Complex Link <?>
	Kernel driver in use: pcieport-driver

00:1d.0 0c03: 8086:3a34 (prog-if 00 [UHCI])
	Subsystem: 1458:5004
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-  
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at e300 [size=32]
	Capabilities: [50] PCIe advanced features <?>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.1 0c03: 8086:3a35 (prog-if 00 [UHCI])
	Subsystem: 1458:5004
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-  
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at e400 [size=32]
	Capabilities: [50] PCIe advanced features <?>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.2 0c03: 8086:3a36 (prog-if 00 [UHCI])
	Subsystem: 1458:5004
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-  
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at e500 [size=32]
	Capabilities: [50] PCIe advanced features <?>
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.7 0c03: 8086:3a3a (prog-if 20 [EHCI])
	Subsystem: 1458:5006
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-  
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at e1805000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA  
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1e.0 0604: 8086:244e (rev 90) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-  
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: e1600000-e16fffff
	Prefetchable memory behind bridge: 00000000e1700000-00000000e17fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-  
<TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [50] Subsystem: 1458:5000

00:1f.0 0601: 8086:3a16
	Subsystem: 1458:5001
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-  
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information <?>

00:1f.2 0106: 8086:3a22 (prog-if 01 [AHCI 1.0])
	Subsystem: 1458:b005
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-  
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 381
	Region 0: I/O ports at e700 [size=8]
	Region 1: I/O ports at e800 [size=4]
	Region 2: I/O ports at e900 [size=8]
	Region 3: I/O ports at ea00 [size=4]
	Region 4: I/O ports at eb00 [size=32]
	Region 5: Memory at e1806000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-  
Queue=0/4 Enable+
		Address: fee0100c  Data: 4171
	Capabilities: [70] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot 
+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [a8] SATA HBA <?>
	Capabilities: [b0] PCIe advanced features <?>
	Kernel driver in use: ahci

00:1f.3 0c05: 8086:3a30
	Subsystem: 1458:5001
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-  
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at e1807000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 0500 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c-i801

02:00.0 0200: 10ec:8168 (rev 02)
	Subsystem: 1458:e000
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-  
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 380
	Region 0: I/O ports at c000 [size=256]
	Region 2: Memory at e1510000 (64-bit, prefetchable) [size=4K]
	Region 4: Memory at e1500000 (64-bit, prefetchable) [size=64K]
	[virtual] Expansion ROM at e1520000 [disabled] [size=64K]
	Capabilities: [40] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot 
+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+  
Queue=0/1 Enable+
		Address: 00000000fee0100c  Data: 4191
	Capabilities: [70] Express (v1) Endpoint, MSI 01
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <8us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 4096 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0  
<512ns, L1 <64us
			ClockPM+ Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-  
BWMgmt- ABWMgmt-
	Capabilities: [b0] MSI-X: Enable- Mask- TabSize=2
		Vector table: BAR=4 offset=00000000
		PBA: BAR=4 offset=00000800
	Capabilities: [d0] Vital Product Data <?>
	Capabilities: [100] Advanced Error Reporting <?>
	Capabilities: [140] Virtual Channel <?>
	Capabilities: [160] Device Serial Number 78-56-34-12-78-56-34-12
	Kernel driver in use: r8169
	Kernel modules: r8169

03:01.0 0480: 1822:4e35 (rev 01)
	Subsystem: 1ae4:0003
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-  
<TAbort+ <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2000ns min, 63750ns max)
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at e1700000 (32-bit, prefetchable) [size=4K]
	Kernel driver in use: Mantis
	Kernel modules: mantis

03:05.0 0101: 1283:8213 (prog-if 85 [Master SecO PriO])
	Subsystem: 1458:b000
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-  
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (2000ns min, 2000ns max)
	Interrupt: pin A routed to IRQ 21
	Region 0: I/O ports at d000 [size=8]
	Region 1: I/O ports at d100 [size=4]
	Region 2: I/O ports at d200 [size=8]
	Region 3: I/O ports at d300 [size=4]
	Region 4: I/O ports at d400 [size=16]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA  
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: pata_it8213

03:07.0 0c00: 104c:8024 (prog-if 10 [OHCI])
	Subsystem: 1458:1000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-  
<TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at e1604000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at e1600000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot 
+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME+
	Kernel driver in use: ohci1394
	Kernel modules: ohci1394

> 3) Chips on the card if you know them (only the basic chip  
> description is required,
> not the complete batch no. etc)
n/a


> Regards,
> Manu
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux- 
> media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb


_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Mantis users

[Hans Werner]

> Hi,
> 
> Can you all please provide me the following information for the Mantis /
> Hopper bridge
> based cards that you have in the following manner ?
> 
> 1) Card Name (As advertised on the cardboard box):

Azurewave AD-SP 400

> 2) lspci -vvn:

04:00.0 0480: 1822:4e35 (rev 01)
        Subsystem: 1822:0031
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (2000ns min, 63750ns max)
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at 99100000 (32-bit, prefetchable) [size=4K]

> 3) Chips on the card if you know them (only the basic chip description is
> required,
> not the complete batch no. etc)

Mantis K62323.1A-2
STB0899
STB6100
20-pin chip under heatsink (LNBP21?)
Portek PTK8706 18-pin 8-bit microcontroller
402B2GLI 8-pin
Nikos N2576 5-pin Voltage Regulator

Regards,
Hans

> 
> 
> Regards,
> Manu

-- 
Release early, release often.

Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Mantis users

[hermann pitton]

Hi,

Am Freitag, den 09.01.2009, 23:46 +0100 schrieb Hans Werner:
> > Hi,
> > 
> > Can you all please provide me the following information for the Mantis /
> > Hopper bridge
> > based cards that you have in the following manner ?
> > 
> > 1) Card Name (As advertised on the cardboard box):
> 
> Azurewave AD-SP 400
> 
> > 2) lspci -vvn:
> 
> 04:00.0 0480: 1822:4e35 (rev 01)
>         Subsystem: 1822:0031
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>         Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>         Latency: 32 (2000ns min, 63750ns max)
>         Interrupt: pin A routed to IRQ 21
>         Region 0: Memory at 99100000 (32-bit, prefetchable) [size=4K]
> 
> > 3) Chips on the card if you know them (only the basic chip description is
> > required,
> > not the complete batch no. etc)
> 
> Mantis K62323.1A-2
> STB0899
> STB6100
> 20-pin chip under heatsink (LNBP21?)

that one seems to always come with an eight pin
ST(micro) EZb.16 something, which is not an eeprom ;)

just my two cents

> Portek PTK8706 18-pin 8-bit microcontroller
> 402B2GLI 8-pin
> Nikos N2576 5-pin Voltage Regulator
> 
> Regards,
> Hans
> 
> > 
> > 
> > Regards,
> > Manu
> 


_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Mantis users

[Carl Oscar Ejwertz]

[-- Attachment #1: Type: text/html, Size: 2938 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Mantis users

[Thomas Müller]

Hi :)

Manu Abraham schrieb:
> Can you all please provide me the following information for the Mantis /
> Hopper bridge
> based cards that you have in the following manner ?
> 
> 1) Card Name (As advertised on the cardboard box):

TerraTec Cinergy S2 PCI HD
http://www.terratec.net/de/produkte/Cinergy_S2_PCI_HD_2335.html
http://www.terratec.net/en/products/Cinergy_S2_PCI_HD_2336.html


> 2) lspci -vvn:

07:02.0 0480: 1822:4e35 (rev 01)
	Subsystem: 153b:1179
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2000ns min, 63750ns max)
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at e3000000 (32-bit, prefetchable) [size=4K]
	Kernel driver in use: Mantis
	Kernel modules: mantis


> 3) Chips on the card if you know them (only the basic chip description
> is required,
> not the complete batch no. etc)
> 
no idea, but if necessary I could remove the card from the case and have a look...


Regards,
Thomas


_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Mantis users

[Ruediger Dohmhardt]

[-- Attachment #1: Type: text/plain, Size: 1508 bytes --]

Manu Abraham schrieb:
> Hi,
>
> Can you all please provide me the following information for the Mantis
> / Hopper bridge
> based cards that you have in the following manner ?
>
> 1) Card Name (As advertised on the cardboard box):
Twinhan AD-CP300
(I just checked www.twinhan.com and found out this card is not sold anymore)
>
> 2) lspci -vvn:
02:01.0 0480: 1822:4e35 (rev 01)
        Subsystem: 1822:0008
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (2000ns min, 63750ns max)
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at dfeff000 (32-bit, prefetchable) [size=4K]
        Kernel driver in use: Mantis
        Kernel modules: mantis

>
> 3) Chips on the card if you know them (only the basic chip description
> is required,
> not the complete batch no. etc)
I'm not sure whether I have the tda10021 tda10023, but I never had any
problems with misdetection of frontend.
My (or your) driver from

http://jusst.de/hg/mantis

has always worked fine.


>
>
> Regards,
> Manu
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux-media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb


[-- Attachment #2: outputFrom_lspci_vvn.txt --]
[-- Type: text/plain, Size: 10038 bytes --]

00:00.0 0600: 1002:5950 (rev 10)
	Subsystem: 1002:5950
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0

00:02.0 0604: 1002:5a34 (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: fa700000-fe7fffff
	Prefetchable memory behind bridge: 00000000bfe00000-00000000dfdfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:11.0 0101: 1002:437a (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: 1462:7141
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 23
	Region 0: I/O ports at bc00 [size=8]
	Region 1: I/O ports at b800 [size=4]
	Region 2: I/O ports at b400 [size=8]
	Region 3: I/O ports at b000 [size=4]
	Region 4: I/O ports at ac00 [size=16]
	Region 5: Memory at febffc00 (32-bit, non-prefetchable) [size=512]
	Expansion ROM at feb00000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: sata_sil
	Kernel modules: ide-pci-generic, ata_generic, pata_acpi, sata_sil

00:12.0 0101: 1002:4379 (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: 1462:7141
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 22
	Region 0: I/O ports at a800 [size=8]
	Region 1: I/O ports at a400 [size=4]
	Region 2: I/O ports at a000 [size=8]
	Region 3: I/O ports at 9c00 [size=4]
	Region 4: I/O ports at 9800 [size=16]
	Region 5: Memory at febff800 (32-bit, non-prefetchable) [size=512]
	Expansion ROM at fea80000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: sata_sil
	Kernel modules: ide-pci-generic, ata_generic, pata_acpi, sata_sil

00:13.0 0c03: 1002:4374 (prog-if 10 [OHCI])
	Subsystem: 1462:7145
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:13.1 0c03: 1002:4375 (prog-if 10 [OHCI])
	Subsystem: 1462:7145
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:13.2 0c03: 1002:4373 (prog-if 20 [EHCI])
	Subsystem: 1462:7145
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:14.0 0c05: 1002:4372 (rev 11)
	Subsystem: 1462:7145
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Region 0: I/O ports at 0b00 [size=16]
	Region 1: Memory at 88000000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c-piix4

00:14.1 0101: 1002:4376 (prog-if 82 [Master PriP])
	Subsystem: 1462:7145
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at ff00 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: pata_atiixp
	Kernel modules: ide-pci-generic, atiixp, ata_generic, pata_acpi, pata_atiixp

00:14.3 0601: 1002:4377
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:14.4 0604: 1002:4371 (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
	I/O behind bridge: 00008000-00008fff
	Memory behind bridge: fe800000-fe8fffff
	Prefetchable memory behind bridge: dfe00000-dfefffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:18.0 0600: 1022:1100
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 0600: 1022:1101
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 0600: 1022:1102
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 0600: 1022:1103
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Kernel driver in use: k8temp
	Kernel modules: k8temp

01:00.0 0300: 10de:0140 (rev a2) (prog-if 00 [VGA controller])
	Subsystem: 1458:3126
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
	[virtual] Expansion ROM at fe7e0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nvidia
	Kernel modules: nvidia, nvidiafb

02:01.0 0480: 1822:4e35 (rev 01)
	Subsystem: 1822:0008
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (2000ns min, 63750ns max)
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at dfeff000 (32-bit, prefetchable) [size=4K]
	Kernel driver in use: Mantis
	Kernel modules: mantis

02:02.0 0401: 1412:1724 (rev 01)
	Subsystem: 1412:3630
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 22
	Region 0: I/O ports at 8c00 [size=32]
	Region 1: I/O ports at 8800 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: ICE1724
	Kernel modules: snd-ice1724

02:03.0 0200: 10ec:8139 (rev 10)
	Subsystem: 1462:145c
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (8000ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 23
	Region 0: I/O ports at 8400 [size=256]
	Region 1: Memory at fe8fe800 (32-bit, non-prefetchable) [size=256]
	Expansion ROM at dfe00000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: 8139too
	Kernel modules: 8139too, 8139cp

02:04.0 0c00: 1106:3044 (rev 80) (prog-if 10 [OHCI])
	Subsystem: 1462:145d
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (8000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at fe8fe000 (32-bit, non-prefetchable) [size=2K]
	Region 1: I/O ports at 8000 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: ohci1394
	Kernel modules: ohci1394


[-- Attachment #3: Type: text/plain, Size: 228 bytes --]

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Mantis users

[Hans Bergersen]

[-- Attachment #1.1: Type: text/plain, Size: 1497 bytes --]


































Date: Sat, 10 Jan 2009 01:00:43 +0400
From: abraham.manu@gmail.com
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] Mantis users

Hi,

Can you all please provide me the following information for the Mantis / Hopper bridge 
based cards that you have in the following manner ?

1) Card Name (As advertised on the cardboard box):

VP-2033 Ver:1.4
AD-CP300


2) lspci -vvn:

03:07.0 0480: 1822:4e35 (rev 01)
    Subsystem: 1822:0008
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
    Latency: 32 (2000ns min, 63750ns max)
    Interrupt: pin A routed to IRQ 21
    Region 0: Memory at fdbff000 (32-bit, prefetchable) [size=4K]
    Kernel driver in use: Mantis
    Kernel modules: mantis


3) Chips on the card if you know them (only the basic chip description is required, 
not the complete batch no. etc)

Mantis K62323.1A-2
CU1216LS/AGIGH-3
uses TDA10023

The card does not work with the driver from http://jusst.de/hg/mantis
With the latest drivers from http://mercurial.intuxication.org/hg/s2-liplianin scanning with czap worked fine.
Scanning from Mythtv setup fails.

Regards,
Hans


_________________________________________________________________
Senaste sportnyheterna & rykande färska resultat!
http://sport.msn.se/

[-- Attachment #1.2: Type: text/html, Size: 2817 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Mantis users

[Anssi Kolehmainen]

On Sat, Jan 10, 2009 at 01:00:43AM +0400, Manu Abraham wrote:
> Hi,
> 
> Can you all please provide me the following information for the Mantis / Hopper bridge
> based cards that you have in the following manner ?
> 
> 1) Card Name (As advertised on the cardboard box):

Terratec Cinergy C (VP-2040 clone) [and Terratec Cinergy CI Addon Card]

http://www.verkkokauppa.com/popups/prodinfo.php?id=3109
http://www.verkkokauppa.com/popups/prodinfo.php?id=26551

> 2) lspci -vvn:

02:09.0 0480: 1822:4e35 (rev 01)
        Subsystem: 153b:1178
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (2000ns min, 63750ns max)
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at df000000 (32-bit, prefetchable) [size=4K]
        Kernel driver in use: Mantis
        Kernel modules: mantis

> 3) Chips on the card if you know them (only the basic chip description is required,
> not the complete batch no. etc)

Don't know, it's well hidden inside my computer and checking it out
would make me lose my uptime (and probably wouldn't do any good for
harddrives which have been spinning for years without breaks).

http://www.terratec.net/en/products/pictures/img/1565213_ac5fcffc30.png

-- 
Anssi Kolehmainen
anssi.kolehmainen@iki.fi
040-5085390

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Mantis users

[Rudy Zijlstra]

Op zaterdag 10-01-2009 om 01:00 uur [tijdzone +0400], schreef Manu
Abraham:
> Hi,
> 
> Can you all please provide me the following information for the
> Mantis / Hopper bridge 
> based cards that you have in the following manner ?
> 
> 1) Card Name (As advertised on the cardboard box):

I've lost the cardboard box long ago

on the PCB is says VP-20330 Ver:1.4. This is a DVB-C card
Label on the tuner tin has Twinhan

> 
> 2) lspci -vvn:

05:09.0 0480: 1822:4e35 (rev 01)
        Subsystem: 1822:0008
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (2000ns min, 63750ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at f8fff000 (32-bit, prefetchable) [size=4K]

> 
> 3) Chips on the card if you know them (only the basic chip description
> is required, 
> not the complete batch no. etc)
> 

Mantis K61468. 1A-1

> 
> Regards,
> Manu
> 
Cheers,

Rudy
> 


_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Mantis users

[Philipp Kolmann]

Manu Abraham wrote:
> Hi,
>
> Can you all please provide me the following information for the Mantis 
> / Hopper bridge
> based cards that you have in the following manner ?
>
> 1) Card Name (As advertised on the cardboard box):
Don't have the box anymore, but that's was was on the Ordering email:

*TERRATEC Cinergy C PCI bulk*

>
> 2) lspci -vvn:

philipp@chief:~$ lspci -s 05:01.0
05:01.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI 
Bridge Controller [Ver 1.0] (rev 01)
philipp@chief:~$ lspci -s 05:01.0 -vvn
05:01.0 0480: 1822:4e35 (rev 01)
        Subsystem: 153b:1178
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (2000ns min, 63750ns max)
        Interrupt: pin A routed to IRQ 3
        Region 0: Memory at dfeff000 (32-bit, prefetchable) [size=4K]
        Kernel modules: mantis



>
> 3) Chips on the card if you know them (only the basic chip description 
> is required,
> not the complete batch no. etc)

If needed, I can pull it out of the box. But currently I am writing this 
mail ;)

thanks
Philipp

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Mantis users

[Chris Ariyo]

Hi,

Manu Abraham wrote:
> Hi,
> 
> Can you all please provide me the following information for the Mantis / Hopper bridge
> based cards that you have in the following manner ?
> 
> 1) Card Name (As advertised on the cardboard box):
> 


TerraTec Cinergy S2 PCI HD with CI module

> 2) lspci -vvn:
> 

04:06.0 0480: 1822:4e35 (rev 01)
	Subsystem: 153b:1179
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort+ <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2000ns min, 63750ns max)
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at fdbff000 (32-bit, prefetchable) [size=4K]
	Kernel driver in use: Mantis
	Kernel modules: mantis

> 3) Chips on the card if you know them (only the basic chip description is required,
> not the complete batch no. etc)
> 

Don't have it


regards,
Chris

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Mantis users

[Mårten Gustafsson]

> Date: Sat, 10 Jan 2009 01:00:43 +0400
> From: "Manu Abraham" <abraham.manu@gmail.com>
> Subject: [linux-dvb] Mantis users
> To: linux-dvb@linuxtv.org
> Message-ID:
> 	<1a297b360901091300w6078f926p5efaadeb912e8c03@mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
> 
> Hi,
> 
> Can you all please provide me the following information for 
> the Mantis /
> Hopper bridge
> based cards that you have in the following manner ?
> 
> 1) Card Name (As advertised on the cardboard box):

AzureWave AD-CP300 on box
AD-CP300 2-T2033-A4 on sticker on PCB
VP-20330 Ver:1.4 on PCB

This board is still on sale in Sweden:
http://www.prisjakt.nu/produkt.php?p=200911

> 2) lspci -vvn:

05:07.0 0480: 1822:4e35 (rev 01)
    Subsystem: 1822:0008
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32 (2000ns min, 63750ns max)
    Interrupt: pin A routed to IRQ 17
    Region 0: Memory at c6000000 (32-bit, prefetchable) [size=4K]
    Kernel driver in use: Mantis
    Kernel modules: mantis

> 3) Chips on the card if you know them (only the basic chip 
> description is
> required,
> not the complete batch no. etc)

Mantis k62323. 1a-2 061117
NXP 3139 147 24321A# CU1216LS/AGIGH-3 SV21 0708
20 pin chip, cannot read without magnfying glass, important?
2 pcs of 8 pin chips, cannot read without magnfying glass, important?

> Regards,
> Manu

Mårten


_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb