Re: [linux-dvb] Support for Leadtek DTV1000S ?

[Vince Mari <vince_m@bigpond.com>]

[-- Attachment #1.1: Type: text/plain, Size: 947 bytes --]

James Gemmell wrote:
> ...
>> I am currently trying to get the tda18271 to lock onto a signal but with
>> no luck yet
>>     
>
> This is pretty much where I'm at right now.  I've been through the
> tda18271 code and, with the exhaustive use of debug statements, am
> satisfied that it setting up the tuner correctly.  The problem seems
> to be somewhere between the tuner and the demod or how the demod is
> interpreting the tuner data.
>
> Do you have any ideas as to what I could try next?  I've tried
> changing the settings in the tda10048_config and tda18271_config
> structures without much luck.  Where you able to get any further?
>
> Best regards
> James Gemmell
>
>   
Hi James,
The signal strength doesnt go low when the antenna is disconnected (it 
does on my other card) instead it stays high. I am currently looking for 
some kind of switch between the antenna and the tuner or a gain problem 
(too sensitive?)

Cheers,
Vince Mari


[-- Attachment #1.2: Type: text/html, Size: 1336 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb