* [linux-dvb] Mantis users
@ 2009-01-09 21:00 Manu Abraham
2009-01-09 21:36 ` Bernhard Stegmaier
` (9 more replies)
0 siblings, 10 replies; 13+ messages in thread
From: Manu Abraham @ 2009-01-09 21:00 UTC (permalink / raw)
To: linux-dvb
[-- Attachment #1.1: Type: text/plain, Size: 345 bytes --]
Hi,
Can you all please provide me the following information for the Mantis /
Hopper bridge
based cards that you have in the following manner ?
1) Card Name (As advertised on the cardboard box):
2) lspci -vvn:
3) Chips on the card if you know them (only the basic chip description is
required,
not the complete batch no. etc)
Regards,
Manu
[-- Attachment #1.2: Type: text/html, Size: 424 bytes --]
[-- Attachment #2: Type: text/plain, Size: 228 bytes --]
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [linux-dvb] Mantis users
2009-01-09 21:00 [linux-dvb] Mantis users Manu Abraham
@ 2009-01-09 21:36 ` Bernhard Stegmaier
2009-01-09 22:46 ` Hans Werner
` (8 subsequent siblings)
9 siblings, 0 replies; 13+ messages in thread
From: Bernhard Stegmaier @ 2009-01-09 21:36 UTC (permalink / raw)
To: Manu Abraham; +Cc: linux-dvb
Hi,
On 09.01.2009, at 22:00, Manu Abraham wrote:
> Hi,
>
> Can you all please provide me the following information for the
> Mantis / Hopper bridge
> based cards that you have in the following manner ?
>
> 1) Card Name (As advertised on the cardboard box):
TechniSat SkyStar HD 2
http://www.technisat.de/indexe33d.html?nav=PC_Produkte,de,76-215
> 2) lspci -vvn:
htpc ~ # lspci -vvn
00:00.0 0600: 8086:2e20 (rev 03)
Subsystem: 1458:5000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 0300: 8086:2e22 (rev 03) (prog-if 00 [VGA controller])
Subsystem: 1458:d000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 379
Region 0: Memory at e1000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at e200 [size=8]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
Address: fee0100c Data: 41a1
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCIe advanced features <?>
00:02.1 0380: 8086:2e23 (rev 03)
Subsystem: 1458:d000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e1400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1a.0 0c03: 8086:3a37 (prog-if 00 [UHCI])
Subsystem: 1458:5004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e600 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 0c03: 8086:3a38 (prog-if 00 [UHCI])
Subsystem: 1458:5004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at e000 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 0c03: 8086:3a39 (prog-if 00 [UHCI])
Subsystem: 1458:5004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e100 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 0c03: 8086:3a3c (prog-if 20 [EHCI])
Subsystem: 1458:5006
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e1804000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 0403: 8086:3a3e
Subsystem: 1458:a102
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at e1800000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot
+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI
00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0
<64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive-
BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 0604: 8086:3a40 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <1us,
L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 10, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
Address: fee0100c Data: 4159
Capabilities: [90] Subsystem: 1458:5001
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot
+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
00:1c.5 0604: 8086:3a4a (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e0000000-e0ffffff
Prefetchable memory behind bridge: 00000000e1500000-00000000e15fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0
<256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 15, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
Address: fee0100c Data: 4161
Capabilities: [90] Subsystem: 1458:5001
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot
+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
00:1d.0 0c03: 8086:3a34 (prog-if 00 [UHCI])
Subsystem: 1458:5004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e300 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 0c03: 8086:3a35 (prog-if 00 [UHCI])
Subsystem: 1458:5004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e400 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 0c03: 8086:3a36 (prog-if 00 [UHCI])
Subsystem: 1458:5004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e500 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 0c03: 8086:3a3a (prog-if 20 [EHCI])
Subsystem: 1458:5006
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at e1805000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 0604: 8086:244e (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e1600000-e16fffff
Prefetchable memory behind bridge: 00000000e1700000-00000000e17fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: 1458:5000
00:1f.0 0601: 8086:3a16
Subsystem: 1458:5001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
00:1f.2 0106: 8086:3a22 (prog-if 01 [AHCI 1.0])
Subsystem: 1458:b005
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 381
Region 0: I/O ports at e700 [size=8]
Region 1: I/O ports at e800 [size=4]
Region 2: I/O ports at e900 [size=8]
Region 3: I/O ports at ea00 [size=4]
Region 4: I/O ports at eb00 [size=32]
Region 5: Memory at e1806000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/4 Enable+
Address: fee0100c Data: 4171
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot
+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA <?>
Capabilities: [b0] PCIe advanced features <?>
Kernel driver in use: ahci
00:1f.3 0c05: 8086:3a30
Subsystem: 1458:5001
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e1807000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
02:00.0 0200: 10ec:8168 (rev 02)
Subsystem: 1458:e000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 380
Region 0: I/O ports at c000 [size=256]
Region 2: Memory at e1510000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at e1500000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at e1520000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot
+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
Queue=0/1 Enable+
Address: 00000000fee0100c Data: 4191
Capabilities: [70] Express (v1) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <8us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<512ns, L1 <64us
ClockPM+ Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [b0] MSI-X: Enable- Mask- TabSize=2
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [d0] Vital Product Data <?>
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 78-56-34-12-78-56-34-12
Kernel driver in use: r8169
Kernel modules: r8169
03:01.0 0480: 1822:4e35 (rev 01)
Subsystem: 1ae4:0003
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort+ <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at e1700000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: Mantis
Kernel modules: mantis
03:05.0 0101: 1283:8213 (prog-if 85 [Master SecO PriO])
Subsystem: 1458:b000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min, 2000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at d000 [size=8]
Region 1: I/O ports at d100 [size=4]
Region 2: I/O ports at d200 [size=8]
Region 3: I/O ports at d300 [size=4]
Region 4: I/O ports at d400 [size=16]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_it8213
03:07.0 0c00: 104c:8024 (prog-if 10 [OHCI])
Subsystem: 1458:1000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at e1604000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e1600000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot
+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ohci1394
Kernel modules: ohci1394
> 3) Chips on the card if you know them (only the basic chip
> description is required,
> not the complete batch no. etc)
n/a
> Regards,
> Manu
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux-
> media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [linux-dvb] Mantis users
2009-01-09 21:00 [linux-dvb] Mantis users Manu Abraham
2009-01-09 21:36 ` Bernhard Stegmaier
@ 2009-01-09 22:46 ` Hans Werner
2009-01-09 23:49 ` hermann pitton
2009-01-10 1:12 ` Carl Oscar Ejwertz
` (7 subsequent siblings)
9 siblings, 1 reply; 13+ messages in thread
From: Hans Werner @ 2009-01-09 22:46 UTC (permalink / raw)
To: Manu Abraham, linux-dvb
> Hi,
>
> Can you all please provide me the following information for the Mantis /
> Hopper bridge
> based cards that you have in the following manner ?
>
> 1) Card Name (As advertised on the cardboard box):
Azurewave AD-SP 400
> 2) lspci -vvn:
04:00.0 0480: 1822:4e35 (rev 01)
Subsystem: 1822:0031
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at 99100000 (32-bit, prefetchable) [size=4K]
> 3) Chips on the card if you know them (only the basic chip description is
> required,
> not the complete batch no. etc)
Mantis K62323.1A-2
STB0899
STB6100
20-pin chip under heatsink (LNBP21?)
Portek PTK8706 18-pin 8-bit microcontroller
402B2GLI 8-pin
Nikos N2576 5-pin Voltage Regulator
Regards,
Hans
>
>
> Regards,
> Manu
--
Release early, release often.
Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [linux-dvb] Mantis users
2009-01-09 22:46 ` Hans Werner
@ 2009-01-09 23:49 ` hermann pitton
0 siblings, 0 replies; 13+ messages in thread
From: hermann pitton @ 2009-01-09 23:49 UTC (permalink / raw)
To: Hans Werner; +Cc: linux-dvb, Manu Abraham
Hi,
Am Freitag, den 09.01.2009, 23:46 +0100 schrieb Hans Werner:
> > Hi,
> >
> > Can you all please provide me the following information for the Mantis /
> > Hopper bridge
> > based cards that you have in the following manner ?
> >
> > 1) Card Name (As advertised on the cardboard box):
>
> Azurewave AD-SP 400
>
> > 2) lspci -vvn:
>
> 04:00.0 0480: 1822:4e35 (rev 01)
> Subsystem: 1822:0031
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (2000ns min, 63750ns max)
> Interrupt: pin A routed to IRQ 21
> Region 0: Memory at 99100000 (32-bit, prefetchable) [size=4K]
>
> > 3) Chips on the card if you know them (only the basic chip description is
> > required,
> > not the complete batch no. etc)
>
> Mantis K62323.1A-2
> STB0899
> STB6100
> 20-pin chip under heatsink (LNBP21?)
that one seems to always come with an eight pin
ST(micro) EZb.16 something, which is not an eeprom ;)
just my two cents
> Portek PTK8706 18-pin 8-bit microcontroller
> 402B2GLI 8-pin
> Nikos N2576 5-pin Voltage Regulator
>
> Regards,
> Hans
>
> >
> >
> > Regards,
> > Manu
>
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [linux-dvb] Mantis users
2009-01-09 21:00 [linux-dvb] Mantis users Manu Abraham
2009-01-09 21:36 ` Bernhard Stegmaier
2009-01-09 22:46 ` Hans Werner
@ 2009-01-10 1:12 ` Carl Oscar Ejwertz
2009-01-10 7:42 ` Thomas Müller
` (6 subsequent siblings)
9 siblings, 0 replies; 13+ messages in thread
From: Carl Oscar Ejwertz @ 2009-01-10 1:12 UTC (permalink / raw)
To: Manu Abraham; +Cc: linux-dvb
[-- Attachment #1: Type: text/html, Size: 2938 bytes --]
[-- Attachment #2: Type: text/plain, Size: 228 bytes --]
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [linux-dvb] Mantis users
2009-01-09 21:00 [linux-dvb] Mantis users Manu Abraham
` (2 preceding siblings ...)
2009-01-10 1:12 ` Carl Oscar Ejwertz
@ 2009-01-10 7:42 ` Thomas Müller
2009-01-10 9:51 ` Ruediger Dohmhardt
` (5 subsequent siblings)
9 siblings, 0 replies; 13+ messages in thread
From: Thomas Müller @ 2009-01-10 7:42 UTC (permalink / raw)
To: linux-dvb
Hi :)
Manu Abraham schrieb:
> Can you all please provide me the following information for the Mantis /
> Hopper bridge
> based cards that you have in the following manner ?
>
> 1) Card Name (As advertised on the cardboard box):
TerraTec Cinergy S2 PCI HD
http://www.terratec.net/de/produkte/Cinergy_S2_PCI_HD_2335.html
http://www.terratec.net/en/products/Cinergy_S2_PCI_HD_2336.html
> 2) lspci -vvn:
07:02.0 0480: 1822:4e35 (rev 01)
Subsystem: 153b:1179
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e3000000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: Mantis
Kernel modules: mantis
> 3) Chips on the card if you know them (only the basic chip description
> is required,
> not the complete batch no. etc)
>
no idea, but if necessary I could remove the card from the case and have a look...
Regards,
Thomas
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [linux-dvb] Mantis users
2009-01-09 21:00 [linux-dvb] Mantis users Manu Abraham
` (3 preceding siblings ...)
2009-01-10 7:42 ` Thomas Müller
@ 2009-01-10 9:51 ` Ruediger Dohmhardt
2009-01-10 10:13 ` Hans Bergersen
` (4 subsequent siblings)
9 siblings, 0 replies; 13+ messages in thread
From: Ruediger Dohmhardt @ 2009-01-10 9:51 UTC (permalink / raw)
To: Manu Abraham; +Cc: linux-dvb
[-- Attachment #1: Type: text/plain, Size: 1508 bytes --]
Manu Abraham schrieb:
> Hi,
>
> Can you all please provide me the following information for the Mantis
> / Hopper bridge
> based cards that you have in the following manner ?
>
> 1) Card Name (As advertised on the cardboard box):
Twinhan AD-CP300
(I just checked www.twinhan.com and found out this card is not sold anymore)
>
> 2) lspci -vvn:
02:01.0 0480: 1822:4e35 (rev 01)
Subsystem: 1822:0008
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at dfeff000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: Mantis
Kernel modules: mantis
>
> 3) Chips on the card if you know them (only the basic chip description
> is required,
> not the complete batch no. etc)
I'm not sure whether I have the tda10021 tda10023, but I never had any
problems with misdetection of frontend.
My (or your) driver from
http://jusst.de/hg/mantis
has always worked fine.
>
>
> Regards,
> Manu
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux-media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[-- Attachment #2: outputFrom_lspci_vvn.txt --]
[-- Type: text/plain, Size: 10038 bytes --]
00:00.0 0600: 1002:5950 (rev 10)
Subsystem: 1002:5950
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
00:02.0 0604: 1002:5a34 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: fa700000-fe7fffff
Prefetchable memory behind bridge: 00000000bfe00000-00000000dfdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:11.0 0101: 1002:437a (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: 1462:7141
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at bc00 [size=8]
Region 1: I/O ports at b800 [size=4]
Region 2: I/O ports at b400 [size=8]
Region 3: I/O ports at b000 [size=4]
Region 4: I/O ports at ac00 [size=16]
Region 5: Memory at febffc00 (32-bit, non-prefetchable) [size=512]
Expansion ROM at feb00000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
Kernel modules: ide-pci-generic, ata_generic, pata_acpi, sata_sil
00:12.0 0101: 1002:4379 (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: 1462:7141
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at a800 [size=8]
Region 1: I/O ports at a400 [size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at 9c00 [size=4]
Region 4: I/O ports at 9800 [size=16]
Region 5: Memory at febff800 (32-bit, non-prefetchable) [size=512]
Expansion ROM at fea80000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
Kernel modules: ide-pci-generic, ata_generic, pata_acpi, sata_sil
00:13.0 0c03: 1002:4374 (prog-if 10 [OHCI])
Subsystem: 1462:7145
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.1 0c03: 1002:4375 (prog-if 10 [OHCI])
Subsystem: 1462:7145
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.2 0c03: 1002:4373 (prog-if 20 [EHCI])
Subsystem: 1462:7145
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:14.0 0c05: 1002:4372 (rev 11)
Subsystem: 1462:7145
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 0b00 [size=16]
Region 1: Memory at 88000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:14.1 0101: 1002:4376 (prog-if 82 [Master PriP])
Subsystem: 1462:7145
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_atiixp
Kernel modules: ide-pci-generic, atiixp, ata_generic, pata_acpi, pata_atiixp
00:14.3 0601: 1002:4377
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 0604: 1002:4371 (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 00008000-00008fff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: dfe00000-dfefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 0600: 1022:1100
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 0600: 1022:1101
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 0600: 1022:1102
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 0600: 1022:1103
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
Kernel modules: k8temp
01:00.0 0300: 10de:0140 (rev a2) (prog-if 00 [VGA controller])
Subsystem: 1458:3126
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at fe7e0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb
02:01.0 0480: 1822:4e35 (rev 01)
Subsystem: 1822:0008
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at dfeff000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: Mantis
Kernel modules: mantis
02:02.0 0401: 1412:1724 (rev 01)
Subsystem: 1412:3630
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 8c00 [size=32]
Region 1: I/O ports at 8800 [size=128]
Capabilities: <access denied>
Kernel driver in use: ICE1724
Kernel modules: snd-ice1724
02:03.0 0200: 10ec:8139 (rev 10)
Subsystem: 1462:145c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 8400 [size=256]
Region 1: Memory at fe8fe800 (32-bit, non-prefetchable) [size=256]
Expansion ROM at dfe00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: 8139too
Kernel modules: 8139too, 8139cp
02:04.0 0c00: 1106:3044 (rev 80) (prog-if 10 [OHCI])
Subsystem: 1462:145d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe8fe000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at 8000 [size=128]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
[-- Attachment #3: Type: text/plain, Size: 228 bytes --]
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [linux-dvb] Mantis users
2009-01-09 21:00 [linux-dvb] Mantis users Manu Abraham
` (4 preceding siblings ...)
2009-01-10 9:51 ` Ruediger Dohmhardt
@ 2009-01-10 10:13 ` Hans Bergersen
2009-01-10 10:33 ` Anssi Kolehmainen
` (3 subsequent siblings)
9 siblings, 0 replies; 13+ messages in thread
From: Hans Bergersen @ 2009-01-10 10:13 UTC (permalink / raw)
To: linux-dvb
[-- Attachment #1.1: Type: text/plain, Size: 1497 bytes --]
Date: Sat, 10 Jan 2009 01:00:43 +0400
From: abraham.manu@gmail.com
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] Mantis users
Hi,
Can you all please provide me the following information for the Mantis / Hopper bridge
based cards that you have in the following manner ?
1) Card Name (As advertised on the cardboard box):
VP-2033 Ver:1.4
AD-CP300
2) lspci -vvn:
03:07.0 0480: 1822:4e35 (rev 01)
Subsystem: 1822:0008
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fdbff000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: Mantis
Kernel modules: mantis
3) Chips on the card if you know them (only the basic chip description is required,
not the complete batch no. etc)
Mantis K62323.1A-2
CU1216LS/AGIGH-3
uses TDA10023
The card does not work with the driver from http://jusst.de/hg/mantis
With the latest drivers from http://mercurial.intuxication.org/hg/s2-liplianin scanning with czap worked fine.
Scanning from Mythtv setup fails.
Regards,
Hans
_________________________________________________________________
Senaste sportnyheterna & rykande färska resultat!
http://sport.msn.se/
[-- Attachment #1.2: Type: text/html, Size: 2817 bytes --]
[-- Attachment #2: Type: text/plain, Size: 228 bytes --]
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [linux-dvb] Mantis users
2009-01-09 21:00 [linux-dvb] Mantis users Manu Abraham
` (5 preceding siblings ...)
2009-01-10 10:13 ` Hans Bergersen
@ 2009-01-10 10:33 ` Anssi Kolehmainen
2009-01-10 12:06 ` Rudy Zijlstra
` (2 subsequent siblings)
9 siblings, 0 replies; 13+ messages in thread
From: Anssi Kolehmainen @ 2009-01-10 10:33 UTC (permalink / raw)
To: Manu Abraham; +Cc: linux-dvb
On Sat, Jan 10, 2009 at 01:00:43AM +0400, Manu Abraham wrote:
> Hi,
>
> Can you all please provide me the following information for the Mantis / Hopper bridge
> based cards that you have in the following manner ?
>
> 1) Card Name (As advertised on the cardboard box):
Terratec Cinergy C (VP-2040 clone) [and Terratec Cinergy CI Addon Card]
http://www.verkkokauppa.com/popups/prodinfo.php?id=3109
http://www.verkkokauppa.com/popups/prodinfo.php?id=26551
> 2) lspci -vvn:
02:09.0 0480: 1822:4e35 (rev 01)
Subsystem: 153b:1178
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at df000000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: Mantis
Kernel modules: mantis
> 3) Chips on the card if you know them (only the basic chip description is required,
> not the complete batch no. etc)
Don't know, it's well hidden inside my computer and checking it out
would make me lose my uptime (and probably wouldn't do any good for
harddrives which have been spinning for years without breaks).
http://www.terratec.net/en/products/pictures/img/1565213_ac5fcffc30.png
--
Anssi Kolehmainen
anssi.kolehmainen@iki.fi
040-5085390
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [linux-dvb] Mantis users
2009-01-09 21:00 [linux-dvb] Mantis users Manu Abraham
` (6 preceding siblings ...)
2009-01-10 10:33 ` Anssi Kolehmainen
@ 2009-01-10 12:06 ` Rudy Zijlstra
2009-01-11 14:49 ` Philipp Kolmann
2009-01-12 7:58 ` Chris Ariyo
9 siblings, 0 replies; 13+ messages in thread
From: Rudy Zijlstra @ 2009-01-10 12:06 UTC (permalink / raw)
To: Manu Abraham; +Cc: linux-dvb
Op zaterdag 10-01-2009 om 01:00 uur [tijdzone +0400], schreef Manu
Abraham:
> Hi,
>
> Can you all please provide me the following information for the
> Mantis / Hopper bridge
> based cards that you have in the following manner ?
>
> 1) Card Name (As advertised on the cardboard box):
I've lost the cardboard box long ago
on the PCB is says VP-20330 Ver:1.4. This is a DVB-C card
Label on the tuner tin has Twinhan
>
> 2) lspci -vvn:
05:09.0 0480: 1822:4e35 (rev 01)
Subsystem: 1822:0008
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f8fff000 (32-bit, prefetchable) [size=4K]
>
> 3) Chips on the card if you know them (only the basic chip description
> is required,
> not the complete batch no. etc)
>
Mantis K61468. 1A-1
>
> Regards,
> Manu
>
Cheers,
Rudy
>
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [linux-dvb] Mantis users
[not found] <mailman.26.1231583624.829.linux-dvb@linuxtv.org>
@ 2009-01-10 12:53 ` Mårten Gustafsson
0 siblings, 0 replies; 13+ messages in thread
From: Mårten Gustafsson @ 2009-01-10 12:53 UTC (permalink / raw)
To: abraham.manu; +Cc: linux-dvb
> Date: Sat, 10 Jan 2009 01:00:43 +0400
> From: "Manu Abraham" <abraham.manu@gmail.com>
> Subject: [linux-dvb] Mantis users
> To: linux-dvb@linuxtv.org
> Message-ID:
> <1a297b360901091300w6078f926p5efaadeb912e8c03@mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hi,
>
> Can you all please provide me the following information for
> the Mantis /
> Hopper bridge
> based cards that you have in the following manner ?
>
> 1) Card Name (As advertised on the cardboard box):
AzureWave AD-CP300 on box
AD-CP300 2-T2033-A4 on sticker on PCB
VP-20330 Ver:1.4 on PCB
This board is still on sale in Sweden:
http://www.prisjakt.nu/produkt.php?p=200911
> 2) lspci -vvn:
05:07.0 0480: 1822:4e35 (rev 01)
Subsystem: 1822:0008
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c6000000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: Mantis
Kernel modules: mantis
> 3) Chips on the card if you know them (only the basic chip
> description is
> required,
> not the complete batch no. etc)
Mantis k62323. 1a-2 061117
NXP 3139 147 24321A# CU1216LS/AGIGH-3 SV21 0708
20 pin chip, cannot read without magnfying glass, important?
2 pcs of 8 pin chips, cannot read without magnfying glass, important?
> Regards,
> Manu
Mårten
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [linux-dvb] Mantis users
2009-01-09 21:00 [linux-dvb] Mantis users Manu Abraham
` (7 preceding siblings ...)
2009-01-10 12:06 ` Rudy Zijlstra
@ 2009-01-11 14:49 ` Philipp Kolmann
2009-01-12 7:58 ` Chris Ariyo
9 siblings, 0 replies; 13+ messages in thread
From: Philipp Kolmann @ 2009-01-11 14:49 UTC (permalink / raw)
To: Manu Abraham; +Cc: linux-dvb
Manu Abraham wrote:
> Hi,
>
> Can you all please provide me the following information for the Mantis
> / Hopper bridge
> based cards that you have in the following manner ?
>
> 1) Card Name (As advertised on the cardboard box):
Don't have the box anymore, but that's was was on the Ordering email:
*TERRATEC Cinergy C PCI bulk*
>
> 2) lspci -vvn:
philipp@chief:~$ lspci -s 05:01.0
05:01.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI
Bridge Controller [Ver 1.0] (rev 01)
philipp@chief:~$ lspci -s 05:01.0 -vvn
05:01.0 0480: 1822:4e35 (rev 01)
Subsystem: 153b:1178
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 3
Region 0: Memory at dfeff000 (32-bit, prefetchable) [size=4K]
Kernel modules: mantis
>
> 3) Chips on the card if you know them (only the basic chip description
> is required,
> not the complete batch no. etc)
If needed, I can pull it out of the box. But currently I am writing this
mail ;)
thanks
Philipp
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [linux-dvb] Mantis users
2009-01-09 21:00 [linux-dvb] Mantis users Manu Abraham
` (8 preceding siblings ...)
2009-01-11 14:49 ` Philipp Kolmann
@ 2009-01-12 7:58 ` Chris Ariyo
9 siblings, 0 replies; 13+ messages in thread
From: Chris Ariyo @ 2009-01-12 7:58 UTC (permalink / raw)
To: Manu Abraham; +Cc: linux-dvb@linuxtv.org
Hi,
Manu Abraham wrote:
> Hi,
>
> Can you all please provide me the following information for the Mantis / Hopper bridge
> based cards that you have in the following manner ?
>
> 1) Card Name (As advertised on the cardboard box):
>
TerraTec Cinergy S2 PCI HD with CI module
> 2) lspci -vvn:
>
04:06.0 0480: 1822:4e35 (rev 01)
Subsystem: 153b:1179
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort+ <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fdbff000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: Mantis
Kernel modules: mantis
> 3) Chips on the card if you know them (only the basic chip description is required,
> not the complete batch no. etc)
>
Don't have it
regards,
Chris
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2009-01-12 7:59 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-01-09 21:00 [linux-dvb] Mantis users Manu Abraham
2009-01-09 21:36 ` Bernhard Stegmaier
2009-01-09 22:46 ` Hans Werner
2009-01-09 23:49 ` hermann pitton
2009-01-10 1:12 ` Carl Oscar Ejwertz
2009-01-10 7:42 ` Thomas Müller
2009-01-10 9:51 ` Ruediger Dohmhardt
2009-01-10 10:13 ` Hans Bergersen
2009-01-10 10:33 ` Anssi Kolehmainen
2009-01-10 12:06 ` Rudy Zijlstra
2009-01-11 14:49 ` Philipp Kolmann
2009-01-12 7:58 ` Chris Ariyo
[not found] <mailman.26.1231583624.829.linux-dvb@linuxtv.org>
2009-01-10 12:53 ` Mårten Gustafsson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox