From: Ludek <ludek@hrbkovi.eu>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] TechniSat CableStar HD2 & CAM
Date: Tue, 13 Jan 2009 11:39:51 +0100 [thread overview]
Message-ID: <496C6F77.8070405@hrbkovi.eu> (raw)
Hi,
I've problem with TechniCrypt CAM inserted on my TechniSat CableStar HD2
(DVB-C card) with current mantis driver. I'm able to watch FTA
channels only :-( As I read this list I'm afraid that CAM modules with
this card is not supported yet. Does anyone get this card with CAM working?
[ 4197.469043] Mantis 0000:05:00.0: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[ 4197.469078] irq: 20, latency: 32
[ 4197.469079] memory: 0xec100000, mmio: 0xffffc20004950000
[ 4197.469082] found a VP-2040 PCI DVB-C device on (05:00.0),
[ 4197.469084] Mantis Rev 1 [1ae4:0002], irq: 20, latency: 32
[ 4197.469087] memory: 0xec100000, mmio: 0xffffc20004950000
[ 4197.471385] mantis_i2c_write: Address=[0x50] <W>[ 08 ]
[ 4197.471982] mantis_i2c_read: Address=[0x50] <R>[ 00 08 c9 d0
1f 2c ]
[ 4197.474091] MAC Address=[00:08:c9:d0:1f:2c]
[ 4197.474119] mantis_alloc_buffers (0): DMA=0x541a0000
cpu=0xffff8800541a0000 size=65536
[ 4197.474190] mantis_alloc_buffers (0): RISC=0x34c0a000
cpu=0xffff880034c0a000 size=1000
[ 4197.474256] DVB: registering new adapter (Mantis dvb adapter)
[ 4197.992116] mantis_frontend_init (0): Probing for CU1216 (DVB-C)
[ 4197.992176] mantis_i2c_write: Address=[0x50] <W>[ ff ]
[ 4197.992528] mantis_i2c_read: Address=[0x50] <R>[ e4 ]
[ 4197.992956] mantis_i2c_write: Address=[0x0c] <W>[ 1a ]
[ 4197.993308] mantis_i2c_read: Address=[0x0c] <R>[ 7d ]
[ 4197.993727] mantis_i2c_write: Address=[0x50] <W>[ ff ]
[ 4197.994078] mantis_i2c_read: Address=[0x50] <R>[ e4 ]
[ 4197.994465] mantis_i2c_write: Address=[0x0c] <W>[ 00 33 ]
[ 4197.995226] mantis_i2c_write: Address=[0x0c] <W>[ 1a ]
[ 4197.995577] mantis_i2c_read: Address=[0x0c] <R>[ 7d ]
[ 4197.995928] TDA10023: i2c-addr = 0x0c, id = 0x7d
[ 4197.995931] mantis_frontend_init (0): found Philips CU1216 DVB-C
frontend (TDA10023) @ 0x0c
[ 4197.995993] mantis_frontend_init (0): Mantis DVB-C Philips CU1216
frontend attach success
[ 4197.996117] DVB: registering adapter 0 frontend 0 (Philips TDA10023
DVB-C)...
[ 4197.996234] mantis_ca_init (0): Registering EN50221 device
[ 4197.996289] dvb_ca_en50221_init
[ 4197.996374] mantis_ca_init (0): Registered EN50221 device
[ 4197.996430] CAMCHANGE IRQ slot:0 change_type:1
[ 4197.996431] dvb_ca_en50221_thread_wakeup
[ 4197.996437] mantis_hif_init (0): Adapter(0) Initializing Mantis Host
Interface
[ 4197.996674] dvb_ca_en50221_thread
[ 4199.000019] CAMREADY IRQ slot:0
[ 4199.000034] dvb_ca_en50221_thread_wakeup
[ 4199.000350] TUPLE type:0x0 length:0
[ 4199.000355] dvb_ca adapter 0: Invalid PC card inserted :(
Regards,
Ludek
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next reply other threads:[~2009-01-13 10:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-13 10:39 Ludek [this message]
2009-01-13 12:12 ` [linux-dvb] TechniSat CableStar HD2 & CAM Tomas Drajsajtl
2009-01-16 16:25 ` Ludek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=496C6F77.8070405@hrbkovi.eu \
--to=ludek@hrbkovi.eu \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox