From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from waladir.klfree.cz ([81.201.51.58] helo=culibrk.hrbkovi.eu) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1LMgft-00011A-F5 for linux-dvb@linuxtv.org; Tue, 13 Jan 2009 11:39:10 +0100 Message-ID: <496C6F77.8070405@hrbkovi.eu> Date: Tue, 13 Jan 2009 11:39:51 +0100 From: Ludek MIME-Version: 1.0 To: linux-dvb@linuxtv.org Subject: [linux-dvb] TechniSat CableStar HD2 & CAM List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: Hi, I've problem with TechniCrypt CAM inserted on my TechniSat CableStar HD2 (DVB-C card) with current mantis driver. I'm able to watch FTA channels only :-( As I read this list I'm afraid that CAM modules with this card is not supported yet. Does anyone get this card with CAM working? [ 4197.469043] Mantis 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 4197.469078] irq: 20, latency: 32 [ 4197.469079] memory: 0xec100000, mmio: 0xffffc20004950000 [ 4197.469082] found a VP-2040 PCI DVB-C device on (05:00.0), [ 4197.469084] Mantis Rev 1 [1ae4:0002], irq: 20, latency: 32 [ 4197.469087] memory: 0xec100000, mmio: 0xffffc20004950000 [ 4197.471385] mantis_i2c_write: Address=[0x50] [ 08 ] [ 4197.471982] mantis_i2c_read: Address=[0x50] [ 00 08 c9 d0 1f 2c ] [ 4197.474091] MAC Address=[00:08:c9:d0:1f:2c] [ 4197.474119] mantis_alloc_buffers (0): DMA=0x541a0000 cpu=0xffff8800541a0000 size=65536 [ 4197.474190] mantis_alloc_buffers (0): RISC=0x34c0a000 cpu=0xffff880034c0a000 size=1000 [ 4197.474256] DVB: registering new adapter (Mantis dvb adapter) [ 4197.992116] mantis_frontend_init (0): Probing for CU1216 (DVB-C) [ 4197.992176] mantis_i2c_write: Address=[0x50] [ ff ] [ 4197.992528] mantis_i2c_read: Address=[0x50] [ e4 ] [ 4197.992956] mantis_i2c_write: Address=[0x0c] [ 1a ] [ 4197.993308] mantis_i2c_read: Address=[0x0c] [ 7d ] [ 4197.993727] mantis_i2c_write: Address=[0x50] [ ff ] [ 4197.994078] mantis_i2c_read: Address=[0x50] [ e4 ] [ 4197.994465] mantis_i2c_write: Address=[0x0c] [ 00 33 ] [ 4197.995226] mantis_i2c_write: Address=[0x0c] [ 1a ] [ 4197.995577] mantis_i2c_read: Address=[0x0c] [ 7d ] [ 4197.995928] TDA10023: i2c-addr = 0x0c, id = 0x7d [ 4197.995931] mantis_frontend_init (0): found Philips CU1216 DVB-C frontend (TDA10023) @ 0x0c [ 4197.995993] mantis_frontend_init (0): Mantis DVB-C Philips CU1216 frontend attach success [ 4197.996117] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)... [ 4197.996234] mantis_ca_init (0): Registering EN50221 device [ 4197.996289] dvb_ca_en50221_init [ 4197.996374] mantis_ca_init (0): Registered EN50221 device [ 4197.996430] CAMCHANGE IRQ slot:0 change_type:1 [ 4197.996431] dvb_ca_en50221_thread_wakeup [ 4197.996437] mantis_hif_init (0): Adapter(0) Initializing Mantis Host Interface [ 4197.996674] dvb_ca_en50221_thread [ 4199.000019] CAMREADY IRQ slot:0 [ 4199.000034] dvb_ca_en50221_thread_wakeup [ 4199.000350] TUPLE type:0x0 length:0 [ 4199.000355] dvb_ca adapter 0: Invalid PC card inserted :( Regards, Ludek _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@vger.kernel.org linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb