Re: kernel soft lockup on boot loading cx2388x based DVB-S card (TeVii S420)

[Aaron Theodore <aaron@bat.id.au>]

Horay my TeVii DVB-S S420 is now working,
only thing now is to work out why it wont load on boot before my DVB-T card

On 16/01/2009 3:19 PM, Aaron Theodore wrote:
> I tried:
> make rmmod
> make rminstall
>
> Although there were still some drivers left over from "tevii_linuxdriver_0815"
>
> /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/dvb-usb/dvb-usb-s600.ko
> /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/dvb-usb/dvb-usb-s650.ko
> /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36067.ko
> /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36060.ko
> /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36050.ko
> /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/saa7134/saa7134-oss.ko
> /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36016.ko
> /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/tuner-3036.ko
> /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/videocodec.ko
> /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/dpc7146.ko
>
> so i just removed manually and rebooted.
> Same issue occurred on reboot.
>
> So i thought to try manually unloading and reloading the module
>
>
> barry:~# rmmod cx8802
> barry:~# modprobe cx8802   
>
> kernel: cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
> kernel: cx88[0]/2: cx2388x 8802 Driver Manager
> kernel: ACPI: PCI Interrupt 0000:05:08.2[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
> kernel: cx88[0]/2: found at 0000:05:08.2, rev: 5, irq: 18, latency: 32, mmio: 0xd9000000
> kernel: cx88/2: cx2388x dvb driver version 0.0.6 loaded
> kernel: cx88/2: registering cx8802 driver, type: dvb access: shared
> kernel: cx88[0]/2: subsystem: d420:9022, board: TeVii S420 DVB-S [card=73]
> kernel: cx88[0]/2: cx2388x based DVB/ATSC card
> kernel: cx8802_alloc_frontends() allocating 1 frontend(s)
> kernel: DVB: registering new adapter (cx88[0])
> kernel: DVB: registering adapter 2 frontend 0 (ST STV0288 DVB-S)...
>
>
> This time it makes the devices in /dev/dvb/
> Now unfortunately i can't test to see if it can actually Tune until a few hours time when i get home (i think i forgot to plug my satellite cable back in!)
>
> Will report back later
>
>
> Can i change the load order of kernel modules, it dosnt seem to like being loaded before my other dvb modules
>
>
> Aaron
>
>
> ----- "Mauro Carvalho Chehab" <mchehab@infradead.org> wrote:
>
>   
>> On Fri, 16 Jan 2009 06:56:05 +1100
>> Aaron Theodore <aaron@bat.id.au> wrote:
>>
>>     
>>> Mauro,
>>>
>>> Thanks for the speedy patch!
>>>       
>> You should thanks to Andy. He is the author of this patch ;)
>>
>>     
>>> My system can at least boot now, but has issues loading the
>>>       
>> frontend.
>>     
>>> DVB: Unable to find symbol stv0299_attach()
>>> DVB: Unable to find symbol stv0288_attach()
>>>       
>> It seems that you didn't compile those two frontends.
>>
>> Cheers,
>> Mauro
>>     
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>