Re: asus Europa2 OEM regression ?

[Yves Le Feuvre <yves.lefeuvre@inserm.fr>]

Hi again,

I have to mention that composite input is working on fedora 10 as well 
as fedora 7 for Asus Europa2 OEM.
The same firmwares are present in /lib/firmware for fedora 7 and fedora 10



Yves Le Feuvre a écrit :
> Hi,
>
> I have two DVB cards, an Hauppauge Nova-T DVB-T 
> [card=18,autodetected], and a Asus Europa2 OEM [card=100,autodetected].
> Both cards are working fine on fedora 7 (kernel 2.6.22.9), but the 
> Asus Europa doesn't work anymore on latest fedora 10 or ubuntu 8.10. I 
> have to say that I have tested only the DVB-T part, as I don't use the 
> cards for analog TV or radio.
> If there is any way i can help to solve the problem ?
>
> regards
>
> Yves
>
>
> Here is what dmesg is saying for both
>
>
> fedora 7
> [...]
> Linux video capture interface: v2.00
> usb 5-2: reset high speed USB device using ehci_hcd and address 2
> cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
> CORE cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T 
> [card=18,autodetected]
> TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
> cx2388x v4l2 driver version 0.0.6 loaded
> phy0: Selected rate control algorithm 'simple'
> tveeprom 1-0050: Hauppauge model 90002, rev C176, serial# 238840
> tveeprom 1-0050: MAC address is 00-0D-FE-03-A4-F8
> tveeprom 1-0050: tuner model is Thompson DTT7592 (idx 76, type 4)
> tveeprom 1-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
> tveeprom 1-0050: audio processor is None (idx 0)
> tveeprom 1-0050: decoder processor is CX882 (idx 25)
> tveeprom 1-0050: has no radio, has IR receiver, has no IR transmitter
> cx88[0]: hauppauge eeprom: model=90002
> input: cx88 IR (Hauppauge Nova-T DVB-T as /class/input/input3
> cx88[0]/2: cx2388x 8802 Driver Manager
> ACPI: PCI Interrupt 0000:02:05.2[A] -> GSI 17 (level, low) -> IRQ 21
> cx88[0]/2: found at 0000:02:05.2, rev: 5, irq: 21, latency: 32, mmio: 
> 0xf8000000
> ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 17 (level, low) -> IRQ 21
> cx88[0]/0: found at 0000:02:05.0, rev: 5, irq: 21, latency: 32, mmio: 
> 0xf6000000
> cx88[0]/0: registered device video0 [v4l2]
> cx88[0]/0: registered device vbi0
> ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:1b.0 to 64
> zd1211rw_mac80211 5-2:1.0: phy0
> usbcore: registered new interface driver zd1211rw_mac80211
> hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
> cx2388x dvb driver version 0.0.6 loaded
> cx8802_register_driver() ->registering driver type=dvb access=shared
> CORE cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T 
> [card=18]
> cx88[0]/2: cx2388x based dvb card
> DVB: registering new adapter (cx88[0]).
> DVB: registering frontend 0 (Conexant CX22702 DVB-T)...
> [...]
> saa7134[0]: subsystem: 1043:4860, board: Asus Europa2 OEM 
> [card=100,autodetected]
> saa7134[0]: board init: gpio is 0
> saa7134[0]: i2c eeprom 00: 43 10 60 48 54 20 1c 00 43 43 a9 1c 55 d2 
> b2 92
> saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom 20: 01 40 01 03 03 02 03 04 08 ff 00 4c ff ff 
> ff ff
> saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom 40: ff 1d 00 c2 86 10 01 01 0d 01 ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
> ff ff
> tuner 5-0043: chip found @ 0x86 (saa7134[0])
> tda9887 5-0043: tda988[5/6/7] found @ 0x43 (tuner)
> tuner 5-0061: chip found @ 0xc2 (saa7134[0])
> tuner 5-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
> tuner 5-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
> saa7134[0]: registered device video1 [v4l2]
> saa7134[0]: registered device vbi1
> saa7134[0]: registered device radio0
> DVB: registering new adapter (saa7134[0]).
> DVB: registering frontend 1 (Philips TDA10046H DVB-T)...
> tda1004x: setting up plls for 53MHz sampling clock
> tda1004x: found firmware revision 29 -- ok
> [...]
>
>
>
>
> fedora 10
> [...]
>
> saa7130/34: v4l2 driver version 0.2.14 loaded
> saa7134 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> saa7134[0]: found at 0000:02:04.0, rev: 1, irq: 16, latency: 32, mmio: 
> 0xf9ffe000
> saa7134[0]: subsystem: 1043:4860, board: Asus Europa2 OEM 
> [card=100,autodetected]
> saa7134[0]: board init: gpio is 0
> saa7134[0]: i2c eeprom 00: 43 10 60 48 54 20 1c 00 43 43 a9 1c 55 d2 
> b2 92
> saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom 20: 01 40 01 03 03 02 03 04 08 ff 00 4c ff ff 
> ff ff
> saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom 40: ff 1d 00 c2 86 10 01 01 0d 01 ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
> ff ff
> saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
> ff ff
> parport_pc 00:06: reported by Plug and Play ACPI
> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
> Initializing USB Mass Storage driver...
> scsi4 : SCSI emulation for USB Mass Storage devices
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> usb-storage: device found at 2
> usb-storage: waiting for device to settle before scanning
> iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
> iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
> iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> ppdev: user-space parallel port driver
> usb 1-2: reset high speed USB device using ehci_hcd and address 2
> nvidia: module license 'NVIDIA' taints kernel.
> phy0: Selected rate control algorithm 'pid'
> saa7134[0]: registered device video0 [v4l2]
> saa7134[0]: registered device vbi0
> saa7134[0]: registered device radio0
> firewire_ohci 0000:02:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> nvidia 0000:01:00.0: setting latency timer to 64
> firewire_ohci: Added fw-ohci device 0000:02:01.0, OHCI version 1.0
> NVRM: loading NVIDIA UNIX x86 Kernel Module  180.22  Tue Jan  6 
> 09:29:08 PST 2009
> cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
> cx8800 0000:02:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T 
> [card=18,autodetected]
> cx88[0]: TV tuner type 4, Radio tuner type -1
> cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
> tveeprom 2-0050: Hauppauge model 90002, rev C176, serial# 238840
> tveeprom 2-0050: MAC address is 00-0D-FE-03-A4-F8
> tveeprom 2-0050: tuner model is Thompson DTT7592 (idx 76, type 4)
> tveeprom 2-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
> tveeprom 2-0050: audio processor is None (idx 0)
> tveeprom 2-0050: decoder processor is CX882 (idx 25)
> tveeprom 2-0050: has no radio, has IR receiver, has no IR transmitter
> cx88[0]: hauppauge eeprom: model=90002
> input: cx88 IR (Hauppauge Nova-T DVB-T as 
> /devices/pci0000:00/0000:00:1e.0/0000:02:05.0/input/input6
> cx88[0]/0: found at 0000:02:05.0, rev: 5, irq: 17, latency: 32, mmio: 
> 0xf6000000
> cx88[0]/0: registered device video1 [v4l2]
> cx88[0]/0: registered device vbi1
> cx88[0]/2: cx2388x 8802 Driver Manager
> cx88-mpeg driver manager 0000:02:05.2: PCI INT A -> GSI 17 (level, 
> low) -> IRQ 17
> cx88[0]/2: found at 0000:02:05.2, rev: 5, irq: 17, latency: 32, mmio: 
> 0xf8000000
> zd1211rw 1-2:1.0: phy0
> usbcore: registered new interface driver zd1211rw
> tuner-simple 1-0061: creating new instance
> tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
> DVB: registering new adapter (saa7134[0])
> DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
> tda1004x: setting up plls for 53MHz sampling clock
> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> HDA Intel 0000:00:1b.0: setting latency timer to 64
> hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
> ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=4 
> (0x14/0x15/0x16/0x17/0x0)
> ALSA sound/pci/hda/hda_codec.c:3025:    speaker_outs=0 
> (0x0/0x0/0x0/0x0/0x0)
> ALSA sound/pci/hda/hda_codec.c:3029:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
> ALSA sound/pci/hda/hda_codec.c:3030:    mono: mono_out=0x0
> ALSA sound/pci/hda/hda_codec.c:3038:    inputs: mic=0x18, fmic=0x19, 
> line=0x1a, fline=0x0, cd=0x1c, aux=0x0
> tda1004x: found firmware revision 29 -- ok
> cx88/2: cx2388x dvb driver version 0.0.6 loaded
> cx88/2: registering cx8802 driver, type: dvb access: shared
> cx88[0]/2: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18]
> cx88[0]/2: cx2388x based DVB/ATSC card
> DVB: registering new adapter (cx88[0])
> DVB: registering frontend 1 (Conexant CX22702 DVB-T)...
> firewire_core: created device fw0: GUID 0011d800006cad14, S400
> device-mapper: multipath: version 1.0.5 loaded
> [...]
> tda1004x: setting up plls for 53MHz sampling clock
> tda1004x: found firmware revision 29 -- ok
> saa7134[0]/irq[10,-151591]: r=0x20 s=0x00 PE
> saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
> tda1004x: setting up plls for 53MHz sampling clock
> tda1004x: found firmware revision 29 -- ok
> tda1004x: setting up plls for 53MHz sampling clock
> tda1004x: found firmware revision 29 -- ok
> tda1004x: setting up plls for 53MHz sampling clock
> tda1004x: found firmware revision 29 -- ok
> tda1004x: setting up plls for 53MHz sampling clock
> tda1004x: found firmware revision 29 -- ok
>
> -- 
> video4linux-list mailing list
> Unsubscribe 
> mailto:video4linux-list-request@redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/video4linux-list
>

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list