From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mx1.redhat.com (mx1.redhat.com [172.16.48.31]) by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id n0N8LUWP004821 for ; Fri, 23 Jan 2009 03:21:30 -0500 Received: from aneto.bordeaux.inserm.fr (aneto.bordeaux.inserm.fr [195.221.150.9]) by mx1.redhat.com (8.13.8/8.13.8) with ESMTP id n0N8LELe017498 for ; Fri, 23 Jan 2009 03:21:14 -0500 Received: from aneto.bordeaux.inserm.fr (localhost.localdomain [127.0.0.1]) by localhost.bordeaux.inserm.fr (SrvInserm) with SMTP id 8CA3E5F911 for ; Fri, 23 Jan 2009 09:21:13 +0100 (CET) Received: from localhost.localdomain (unknown [195.221.147.159]) by aneto.bordeaux.inserm.fr (SrvInserm) with ESMTP id 79EA75F90D for ; Fri, 23 Jan 2009 09:21:13 +0100 (CET) Message-ID: <49797D63.1090501@inserm.fr> Date: Fri, 23 Jan 2009 09:18:43 +0100 From: Yves Le Feuvre MIME-Version: 1.0 To: video4linux-list@redhat.com References: <497979FF.5090600@inserm.fr> In-Reply-To: <497979FF.5090600@inserm.fr> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Subject: Re: asus Europa2 OEM regression ? List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: video4linux-list-bounces@redhat.com Errors-To: video4linux-list-bounces@redhat.com List-ID: Hi again, I have to mention that composite input is working on fedora 10 as well as fedora 7 for Asus Europa2 OEM. The same firmwares are present in /lib/firmware for fedora 7 and fedora 10 Yves Le Feuvre a écrit : > Hi, > > I have two DVB cards, an Hauppauge Nova-T DVB-T > [card=18,autodetected], and a Asus Europa2 OEM [card=100,autodetected]. > Both cards are working fine on fedora 7 (kernel 2.6.22.9), but the > Asus Europa doesn't work anymore on latest fedora 10 or ubuntu 8.10. I > have to say that I have tested only the DVB-T part, as I don't use the > cards for analog TV or radio. > If there is any way i can help to solve the problem ? > > regards > > Yves > > > Here is what dmesg is saying for both > > > fedora 7 > [...] > Linux video capture interface: v2.00 > usb 5-2: reset high speed USB device using ehci_hcd and address 2 > cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded > CORE cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T > [card=18,autodetected] > TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe > cx2388x v4l2 driver version 0.0.6 loaded > phy0: Selected rate control algorithm 'simple' > tveeprom 1-0050: Hauppauge model 90002, rev C176, serial# 238840 > tveeprom 1-0050: MAC address is 00-0D-FE-03-A4-F8 > tveeprom 1-0050: tuner model is Thompson DTT7592 (idx 76, type 4) > tveeprom 1-0050: TV standards ATSC/DVB Digital (eeprom 0x80) > tveeprom 1-0050: audio processor is None (idx 0) > tveeprom 1-0050: decoder processor is CX882 (idx 25) > tveeprom 1-0050: has no radio, has IR receiver, has no IR transmitter > cx88[0]: hauppauge eeprom: model=90002 > input: cx88 IR (Hauppauge Nova-T DVB-T as /class/input/input3 > cx88[0]/2: cx2388x 8802 Driver Manager > ACPI: PCI Interrupt 0000:02:05.2[A] -> GSI 17 (level, low) -> IRQ 21 > cx88[0]/2: found at 0000:02:05.2, rev: 5, irq: 21, latency: 32, mmio: > 0xf8000000 > ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 17 (level, low) -> IRQ 21 > cx88[0]/0: found at 0000:02:05.0, rev: 5, irq: 21, latency: 32, mmio: > 0xf6000000 > cx88[0]/0: registered device video0 [v4l2] > cx88[0]/0: registered device vbi0 > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > zd1211rw_mac80211 5-2:1.0: phy0 > usbcore: registered new interface driver zd1211rw_mac80211 > hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... > cx2388x dvb driver version 0.0.6 loaded > cx8802_register_driver() ->registering driver type=dvb access=shared > CORE cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T > [card=18] > cx88[0]/2: cx2388x based dvb card > DVB: registering new adapter (cx88[0]). > DVB: registering frontend 0 (Conexant CX22702 DVB-T)... > [...] > saa7134[0]: subsystem: 1043:4860, board: Asus Europa2 OEM > [card=100,autodetected] > saa7134[0]: board init: gpio is 0 > saa7134[0]: i2c eeprom 00: 43 10 60 48 54 20 1c 00 43 43 a9 1c 55 d2 > b2 92 > saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff > ff ff > saa7134[0]: i2c eeprom 20: 01 40 01 03 03 02 03 04 08 ff 00 4c ff ff > ff ff > saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff > saa7134[0]: i2c eeprom 40: ff 1d 00 c2 86 10 01 01 0d 01 ff ff ff ff > ff ff > saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff > saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff > saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff > tuner 5-0043: chip found @ 0x86 (saa7134[0]) > tda9887 5-0043: tda988[5/6/7] found @ 0x43 (tuner) > tuner 5-0061: chip found @ 0xc2 (saa7134[0]) > tuner 5-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) > tuner 5-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) > saa7134[0]: registered device video1 [v4l2] > saa7134[0]: registered device vbi1 > saa7134[0]: registered device radio0 > DVB: registering new adapter (saa7134[0]). > DVB: registering frontend 1 (Philips TDA10046H DVB-T)... > tda1004x: setting up plls for 53MHz sampling clock > tda1004x: found firmware revision 29 -- ok > [...] > > > > > fedora 10 > [...] > > saa7130/34: v4l2 driver version 0.2.14 loaded > saa7134 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > saa7134[0]: found at 0000:02:04.0, rev: 1, irq: 16, latency: 32, mmio: > 0xf9ffe000 > saa7134[0]: subsystem: 1043:4860, board: Asus Europa2 OEM > [card=100,autodetected] > saa7134[0]: board init: gpio is 0 > saa7134[0]: i2c eeprom 00: 43 10 60 48 54 20 1c 00 43 43 a9 1c 55 d2 > b2 92 > saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff > ff ff > saa7134[0]: i2c eeprom 20: 01 40 01 03 03 02 03 04 08 ff 00 4c ff ff > ff ff > saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff > saa7134[0]: i2c eeprom 40: ff 1d 00 c2 86 10 01 01 0d 01 ff ff ff ff > ff ff > saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff > saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff > saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff > saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff > saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff > saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff > saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff > saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff > saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff > saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff > saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff ff > parport_pc 00:06: reported by Plug and Play ACPI > parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] > Initializing USB Mass Storage driver... > scsi4 : SCSI emulation for USB Mass Storage devices > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > usb-storage: device found at 2 > usb-storage: waiting for device to settle before scanning > iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) > iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) > iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > ppdev: user-space parallel port driver > usb 1-2: reset high speed USB device using ehci_hcd and address 2 > nvidia: module license 'NVIDIA' taints kernel. > phy0: Selected rate control algorithm 'pid' > saa7134[0]: registered device video0 [v4l2] > saa7134[0]: registered device vbi0 > saa7134[0]: registered device radio0 > firewire_ohci 0000:02:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > nvidia 0000:01:00.0: setting latency timer to 64 > firewire_ohci: Added fw-ohci device 0000:02:01.0, OHCI version 1.0 > NVRM: loading NVIDIA UNIX x86 Kernel Module 180.22 Tue Jan 6 > 09:29:08 PST 2009 > cx88/0: cx2388x v4l2 driver version 0.0.6 loaded > cx8800 0000:02:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T > [card=18,autodetected] > cx88[0]: TV tuner type 4, Radio tuner type -1 > cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded > tveeprom 2-0050: Hauppauge model 90002, rev C176, serial# 238840 > tveeprom 2-0050: MAC address is 00-0D-FE-03-A4-F8 > tveeprom 2-0050: tuner model is Thompson DTT7592 (idx 76, type 4) > tveeprom 2-0050: TV standards ATSC/DVB Digital (eeprom 0x80) > tveeprom 2-0050: audio processor is None (idx 0) > tveeprom 2-0050: decoder processor is CX882 (idx 25) > tveeprom 2-0050: has no radio, has IR receiver, has no IR transmitter > cx88[0]: hauppauge eeprom: model=90002 > input: cx88 IR (Hauppauge Nova-T DVB-T as > /devices/pci0000:00/0000:00:1e.0/0000:02:05.0/input/input6 > cx88[0]/0: found at 0000:02:05.0, rev: 5, irq: 17, latency: 32, mmio: > 0xf6000000 > cx88[0]/0: registered device video1 [v4l2] > cx88[0]/0: registered device vbi1 > cx88[0]/2: cx2388x 8802 Driver Manager > cx88-mpeg driver manager 0000:02:05.2: PCI INT A -> GSI 17 (level, > low) -> IRQ 17 > cx88[0]/2: found at 0000:02:05.2, rev: 5, irq: 17, latency: 32, mmio: > 0xf8000000 > zd1211rw 1-2:1.0: phy0 > usbcore: registered new interface driver zd1211rw > tuner-simple 1-0061: creating new instance > tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) > DVB: registering new adapter (saa7134[0]) > DVB: registering frontend 0 (Philips TDA10046H DVB-T)... > tda1004x: setting up plls for 53MHz sampling clock > HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > HDA Intel 0000:00:1b.0: setting latency timer to 64 > hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... > ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=4 > (0x14/0x15/0x16/0x17/0x0) > ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=0 > (0x0/0x0/0x0/0x0/0x0) > ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) > ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0 > ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0x18, fmic=0x19, > line=0x1a, fline=0x0, cd=0x1c, aux=0x0 > tda1004x: found firmware revision 29 -- ok > cx88/2: cx2388x dvb driver version 0.0.6 loaded > cx88/2: registering cx8802 driver, type: dvb access: shared > cx88[0]/2: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18] > cx88[0]/2: cx2388x based DVB/ATSC card > DVB: registering new adapter (cx88[0]) > DVB: registering frontend 1 (Conexant CX22702 DVB-T)... > firewire_core: created device fw0: GUID 0011d800006cad14, S400 > device-mapper: multipath: version 1.0.5 loaded > [...] > tda1004x: setting up plls for 53MHz sampling clock > tda1004x: found firmware revision 29 -- ok > saa7134[0]/irq[10,-151591]: r=0x20 s=0x00 PE > saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit > tda1004x: setting up plls for 53MHz sampling clock > tda1004x: found firmware revision 29 -- ok > tda1004x: setting up plls for 53MHz sampling clock > tda1004x: found firmware revision 29 -- ok > tda1004x: setting up plls for 53MHz sampling clock > tda1004x: found firmware revision 29 -- ok > tda1004x: setting up plls for 53MHz sampling clock > tda1004x: found firmware revision 29 -- ok > > -- > video4linux-list mailing list > Unsubscribe > mailto:video4linux-list-request@redhat.com?subject=unsubscribe > https://www.redhat.com/mailman/listinfo/video4linux-list > -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list