From: Miroslav Rovis <m.rovis@inet.hr>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] [PATCH] cx88-dvb: Fix order of frontend allocations (Re: current v4l-dvb - cannot access /dev/dvb/: No such file or directory
Date: Fri, 23 Jan 2009 20:21:52 +0100 [thread overview]
Message-ID: <497A18D0.70009@inet.hr> (raw)
In-Reply-To: <mailman.1.1232708401.9307.linux-dvb@linuxtv.org>
I pasted the subject line from:
http://www.linuxtv.org/pipermail/linux-dvb/2009-January/thread.html#31463
the last message of the thread on the problem that I still have (there
is the patch in there in some post on the thread that should fix my
problem).
Tha card is a Hauppauge HVR-3000 that works fine on M$ Windoze Vista.
Arch is 64bit Athlon based...
With the kernel ("uname -r" output):
2.6.28-gentoo-r1
In fact, cx88-dvb sometimes loads and then I have the populated
/dev/dvb... (very choppy but I got anything I tried after dvbscan and
szap etc.)
And sometimes it doesn't load at all and there is no /dev/dvb directory
at all.
The error when issuing "modprobe cx88-dvb" is:
FATAL: Error inserting cx88_dvb
(/lib/modules/2.6.28-gentoo-r1/v4l-dvb/video/cx88/cx88-dvb.ko): Unknown
symbol in module, or unknown parameter (see dmesg)
dmesg on its part only has:
cx88_dvb: Unknown parameter `frontend'
The kernel (2.6.28-gentoo-r1) does have the aforementioned Andy's patch
applied...
Firmare is as suggested here:
http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-4000#Firmware_v1.23.86.1
I am at a loss where to turn, what to try...
Cheers!
Miro Rovis
www.exDeo.com
www.CroatiaFidelis.hr
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
parent reply other threads:[~2009-01-23 19:21 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <mailman.1.1232708401.9307.linux-dvb@linuxtv.org>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=497A18D0.70009@inet.hr \
--to=m.rovis@inet.hr \
--cc=linux-dvb@linuxtv.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox