From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mx1.redhat.com (mx1.redhat.com [172.16.48.31]) by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id n0Q8Ksg8020036 for ; Mon, 26 Jan 2009 03:20:54 -0500 Received: from aneto.bordeaux.inserm.fr (aneto.bordeaux.inserm.fr [195.221.150.9]) by mx1.redhat.com (8.13.8/8.13.8) with ESMTP id n0Q8KZvt006282 for ; Mon, 26 Jan 2009 03:20:36 -0500 Message-ID: <497D71BB.4050306@inserm.fr> Date: Mon, 26 Jan 2009 09:18:03 +0100 From: Yves Le Feuvre MIME-Version: 1.0 To: hermann pitton References: <497979FF.5090600@inserm.fr> <1232755686.5451.7.camel@pc10.localdom.local> In-Reply-To: <1232755686.5451.7.camel@pc10.localdom.local> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Cc: video4linux-list@redhat.com Subject: Re: asus Europa2 OEM regression ? List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: video4linux-list-bounces@redhat.com Errors-To: video4linux-list-bounces@redhat.com List-ID: Hello, [...] > Please try as root "modprobe -vr saa7134-dvb saa7134-alsa" > and "modprobe -v saa7134". > > Is the tda9887 detected now and the card usable again? This doesn't change anything. I still have the parity error and the card is unsusable. If I remember well (I'll check when I'm back home this evening), lsmod reports that tda9887 is loaded, but used by cx88 or cx88_dvb, and not by any of the saa7134 modules. > If your hardware is unchanged compared to Fedora 7 and you have some > time for it, you might try to prove if you get the parity errors also on > a vanilla 2.6.27 with the same kernel config. on fedora 10, with gcc-4.3.2-7 with vanilla kernel 2.6.25 both cards are working: Nova-T DVB-T [card=18], and Asus Europa2 OEM [card=100] with vanilla kernel 2.6.28.1 Asus Europa2 OEM does not work anymore (parity error) (however, there may be some differences in kernel configs, as config-2.6.25 comes from an updated fedora 7 kernel config (make oldconfig), and 2.6.28.1 comes rom installed fedora 10 kernel. I'll try 2.6.26 and 2.6.27 tonight, with same config as 2.6.25, unless you estimate there are better other things to test before I also tested v4l-dvb git tree with vanilla-2.6.28.1, but the card doesn't work either. Yves -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list