[linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Newsy Paper]

the transponders you don't get lock are problem transponders of s2-3200.
The driver is still not able to lock on dvb-s2 30000 3/4 transponders :(

Which software do you use to play HD content?
you need either xine-lib 1.2 with external ffmpeg (recent developer's version).
or xine-vdpau (if you have a NVIDIA graka that supports h264 hw acceleration).

regards

Newsy


--- Newsy Paper <newspaperman_germany@yahoo.com> schrieb am Mo, 26.1.2009:

> Von: Newsy Paper <newspaperman_germany@yahoo.com>
> Betreff: Re: [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels
> An: linux-media@vger.kernel.org
> Datum: Montag, 26. Januar 2009, 13:09
> the transponders you don't get lock are problem
> transponders of s2-3200.
> The driver is still not able to lock on dvb-s2 30000 3/4
> transponders :(
> 
> Which software do you use to play HD content?
> you need either xine-lib 1.2 with external ffmpeg (recent
> developer's version).
> or xine-vdpau (if you have a NVIDIA graka that supports
> h264 hw acceleration).
> 
> regards 
> 
> Newsy
> 
> 
> --- Tomas Drajsajtl <linux-dvb@drajsajtl.cz> schrieb
> am Mo, 26.1.2009:
> 
> > Von: Tomas Drajsajtl <linux-dvb@drajsajtl.cz>
> > Betreff: Re: [linux-dvb] Technotrend Budget S2-3200
> Digital artefacts on HDchannels
> > An: linux-media@vger.kernel.org, linux-dvb@linuxtv.org
> > Datum: Montag, 26. Januar 2009, 8:14
> > > Nat Geo HD and Histoy Channel HD are the only two
> HD
> > channels I can
> > > lock, and I have problems with digital artefacts,
> > lines across the
> > > screen missing data and tons of errors from the
> > frontend. See below for
> > > error log.
> > 
> > Hi Jonas,
> > just guessing - try another card slot. If there are
> more
> > devices on one IRQ
> > the transfer speed from the card can be lower and
> causing
> > problems at
> > channels with higher bitrate. I had similar colision
> > between PCI network and
> > sound cards. When I moved one card to another slot,
> the
> > problem was solved.
> > 
> > Regards,
> > Tomas
> > 
> > 
> > _______________________________________________
> > linux-dvb users mailing list
> > For V4L/DVB development, please use instead
> > linux-media@vger.kernel.org
> > linux-dvb@linuxtv.org
> >
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb


      

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Chris Silva]

On Mon, Jan 26, 2009 at 2:40 PM, Newsy Paper
<newspaperman_germany@yahoo.com> wrote:
> the transponders you don't get lock are problem transponders of s2-3200.
> The driver is still not able to lock on dvb-s2 30000 3/4 transponders :(
>
> Which software do you use to play HD content?
> you need either xine-lib 1.2 with external ffmpeg (recent developer's version).
> or xine-vdpau (if you have a NVIDIA graka that supports h264 hw acceleration).
>
> regards
>
> Newsy

I can confirm this. I use S30W (Hispasat) and one of the providers,
Meo, broadcasts everything on DVB-S2 30000 3/4.
I can't get a lock on any of the transponders/channels. And to make
matters worse, not even scan-s2 can get a really usable channel list.
I had to build the list by hand, according to
http://pt.kingofsat.net/pack-meo.php page.

And it still doesn't work.

I use vdr-xine and xineliboutput with vdr 1.7.0 and up, plus
xine-vdpau to no avail.

What's the point of having a DVB-S2 card if we can't tune to those
channels? What's missing in the S2-3200 drivers?

Chris

[linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Chris Silva]

On Mon, Jan 26, 2009 at 2:40 PM, Newsy Paper
<newspaperman_germany@yahoo.com> wrote:
> the transponders you don't get lock are problem transponders of s2-3200.
> The driver is still not able to lock on dvb-s2 30000 3/4 transponders :(
>
> Which software do you use to play HD content?
> you need either xine-lib 1.2 with external ffmpeg (recent developer's version).
> or xine-vdpau (if you have a NVIDIA graka that supports h264 hw acceleration).
>
> regards
>
> Newsy

I can confirm this. I use S30W (Hispasat) and one of the providers,
Meo, broadcasts everything on DVB-S2 30000 3/4.
I can't get a lock on any of the transponders/channels. And to make
matters worse, not even scan-s2 can get a really usable channel list.
I had to build the list by hand, according to
http://pt.kingofsat.net/pack-meo.php page.

And it still doesn't work.

I use vdr-xine and xineliboutput with vdr 1.7.0 and up, plus
xine-vdpau to no avail.

What's the point of having a DVB-S2 card if we can't tune to those
channels? What's missing in the S2-3200 drivers?

Chris

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Alex Betis]

[-- Attachment #1.1: Type: text/plain, Size: 1538 bytes --]

On Mon, Jan 26, 2009 at 5:41 PM, Chris Silva <2manybills@gmail.com> wrote:

> On Mon, Jan 26, 2009 at 2:40 PM, Newsy Paper
> <newspaperman_germany@yahoo.com> wrote:
> > the transponders you don't get lock are problem transponders of s2-3200.
> > The driver is still not able to lock on dvb-s2 30000 3/4 transponders :(
> >
> > Which software do you use to play HD content?
> > you need either xine-lib 1.2 with external ffmpeg (recent developer's
> version).
> > or xine-vdpau (if you have a NVIDIA graka that supports h264 hw
> acceleration).
> >
> > regards
> >
> > Newsy
>
> I can confirm this. I use S30W (Hispasat) and one of the providers,
> Meo, broadcasts everything on DVB-S2 30000 3/4.
> I can't get a lock on any of the transponders/channels. And to make
> matters worse, not even scan-s2 can get a really usable channel list.
> I had to build the list by hand, according to
> http://pt.kingofsat.net/pack-meo.php page.
>
> And it still doesn't work.
>
> I use vdr-xine and xineliboutput with vdr 1.7.0 and up, plus
> xine-vdpau to no avail.
>
> What's the point of having a DVB-S2 card if we can't tune to those
> channels? What's missing in the S2-3200 drivers?

What drivers do you use?
I saw that Igor did some changes in his repository to lock on high SR
channels.


>
>
> Chris
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux-media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>

[-- Attachment #1.2: Type: text/html, Size: 2396 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Chris Silva]

On Mon, Jan 26, 2009 at 3:44 PM, Alex Betis <alex.betis@gmail.com> wrote:
> On Mon, Jan 26, 2009 at 5:41 PM, Chris Silva <2manybills@gmail.com> wrote:
>>
>> On Mon, Jan 26, 2009 at 2:40 PM, Newsy Paper
>> <newspaperman_germany@yahoo.com> wrote:
>> > the transponders you don't get lock are problem transponders of s2-3200.
>> > The driver is still not able to lock on dvb-s2 30000 3/4 transponders :(
>> >
>> > Which software do you use to play HD content?
>> > you need either xine-lib 1.2 with external ffmpeg (recent developer's
>> > version).
>> > or xine-vdpau (if you have a NVIDIA graka that supports h264 hw
>> > acceleration).
>> >
>> > regards
>> >
>> > Newsy
>>
>> I can confirm this. I use S30W (Hispasat) and one of the providers,
>> Meo, broadcasts everything on DVB-S2 30000 3/4.
>> I can't get a lock on any of the transponders/channels. And to make
>> matters worse, not even scan-s2 can get a really usable channel list.
>> I had to build the list by hand, according to
>> http://pt.kingofsat.net/pack-meo.php page.
>>
>> And it still doesn't work.
>>
>> I use vdr-xine and xineliboutput with vdr 1.7.0 and up, plus
>> xine-vdpau to no avail.
>>
>> What's the point of having a DVB-S2 card if we can't tune to those
>> channels? What's missing in the S2-3200 drivers?
>
> What drivers do you use?
> I saw that Igor did some changes in his repository to lock on high SR
> channels.
>

I've tried with both v4l-dvb and Igor repository. Haven't tried with
latest changes Igor made.

I'll try it tonight and comment on the state.

But for now, I'm somewhat disappointed. It's been over 6 months trying
to make DVB-S2 transponders to work and no result to show.

But wey... DVB-S works perfectly.

Chris

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Chris Silva]

On Mon, Jan 26, 2009 at 3:51 PM, Chris Silva <2manybills@gmail.com> wrote:
> On Mon, Jan 26, 2009 at 3:44 PM, Alex Betis <alex.betis@gmail.com> wrote:
>> On Mon, Jan 26, 2009 at 5:41 PM, Chris Silva <2manybills@gmail.com> wrote:
>>>
>>> On Mon, Jan 26, 2009 at 2:40 PM, Newsy Paper
>>> <newspaperman_germany@yahoo.com> wrote:
>>> > the transponders you don't get lock are problem transponders of s2-3200.
>>> > The driver is still not able to lock on dvb-s2 30000 3/4 transponders :(
>>> >
>>> > Which software do you use to play HD content?
>>> > you need either xine-lib 1.2 with external ffmpeg (recent developer's
>>> > version).
>>> > or xine-vdpau (if you have a NVIDIA graka that supports h264 hw
>>> > acceleration).
>>> >
>>> > regards
>>> >
>>> > Newsy
>>>
>>> I can confirm this. I use S30W (Hispasat) and one of the providers,
>>> Meo, broadcasts everything on DVB-S2 30000 3/4.
>>> I can't get a lock on any of the transponders/channels. And to make
>>> matters worse, not even scan-s2 can get a really usable channel list.
>>> I had to build the list by hand, according to
>>> http://pt.kingofsat.net/pack-meo.php page.
>>>
>>> And it still doesn't work.
>>>
>>> I use vdr-xine and xineliboutput with vdr 1.7.0 and up, plus
>>> xine-vdpau to no avail.
>>>
>>> What's the point of having a DVB-S2 card if we can't tune to those
>>> channels? What's missing in the S2-3200 drivers?
>>
>> What drivers do you use?
>> I saw that Igor did some changes in his repository to lock on high SR
>> channels.
>>
>
> I've tried with both v4l-dvb and Igor repository. Haven't tried with
> latest changes Igor made.
>
> I'll try it tonight and comment on the state.
>
> But for now, I'm somewhat disappointed. It's been over 6 months trying
> to make DVB-S2 transponders to work and no result to show.
>
> But wey... DVB-S works perfectly.
>
> Chris
>

Latest changes I can see at
http://mercurial.intuxication.org/hg/s2-liplianin/ were made about 7
to 10 days ago. Is this correct? If that's correct, then I'm using
latest Igor drivers. And behavior described above is what I'm getting.

I can't see anything related do high SR channels on Igor repository.

Chris

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Alex Betis]

[-- Attachment #1.1: Type: text/plain, Size: 2684 bytes --]

On Mon, Jan 26, 2009 at 6:08 PM, Chris Silva <2manybills@gmail.com> wrote:

> On Mon, Jan 26, 2009 at 3:51 PM, Chris Silva <2manybills@gmail.com> wrote:
> > On Mon, Jan 26, 2009 at 3:44 PM, Alex Betis <alex.betis@gmail.com>
> wrote:
> >> On Mon, Jan 26, 2009 at 5:41 PM, Chris Silva <2manybills@gmail.com>
> wrote:
> >>>
> >>> On Mon, Jan 26, 2009 at 2:40 PM, Newsy Paper
> >>> <newspaperman_germany@yahoo.com> wrote:
> >>> > the transponders you don't get lock are problem transponders of
> s2-3200.
> >>> > The driver is still not able to lock on dvb-s2 30000 3/4 transponders
> :(
> >>> >
> >>> > Which software do you use to play HD content?
> >>> > you need either xine-lib 1.2 with external ffmpeg (recent developer's
> >>> > version).
> >>> > or xine-vdpau (if you have a NVIDIA graka that supports h264 hw
> >>> > acceleration).
> >>> >
> >>> > regards
> >>> >
> >>> > Newsy
> >>>
> >>> I can confirm this. I use S30W (Hispasat) and one of the providers,
> >>> Meo, broadcasts everything on DVB-S2 30000 3/4.
> >>> I can't get a lock on any of the transponders/channels. And to make
> >>> matters worse, not even scan-s2 can get a really usable channel list.
> >>> I had to build the list by hand, according to
> >>> http://pt.kingofsat.net/pack-meo.php page.
> >>>
> >>> And it still doesn't work.
> >>>
> >>> I use vdr-xine and xineliboutput with vdr 1.7.0 and up, plus
> >>> xine-vdpau to no avail.
> >>>
> >>> What's the point of having a DVB-S2 card if we can't tune to those
> >>> channels? What's missing in the S2-3200 drivers?
> >>
> >> What drivers do you use?
> >> I saw that Igor did some changes in his repository to lock on high SR
> >> channels.
> >>
> >
> > I've tried with both v4l-dvb and Igor repository. Haven't tried with
> > latest changes Igor made.
> >
> > I'll try it tonight and comment on the state.
> >
> > But for now, I'm somewhat disappointed. It's been over 6 months trying
> > to make DVB-S2 transponders to work and no result to show.
> >
> > But wey... DVB-S works perfectly.
> >
> > Chris
> >
>
> Latest changes I can see at
> http://mercurial.intuxication.org/hg/s2-liplianin/ were made about 7
> to 10 days ago. Is this correct? If that's correct, then I'm using
> latest Igor drivers. And behavior described above is what I'm getting.
>
> I can't see anything related do high SR channels on Igor repository.

He did it few months ago. If you're on latest than you should have it.


>
>
> Chris
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux-media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>

[-- Attachment #1.2: Type: text/html, Size: 4188 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Manu Abraham]

[-- Attachment #1.1: Type: text/plain, Size: 686 bytes --]

On Mon, Jan 26, 2009 at 8:19 PM, Alex Betis <alex.betis@gmail.com> wrote:

>
> Latest changes I can see at
>> http://mercurial.intuxication.org/hg/s2-liplianin/ were made about 7
>> to 10 days ago. Is this correct? If that's correct, then I'm using
>> latest Igor drivers. And behavior described above is what I'm getting.
>>
>> I can't see anything related do high SR channels on Igor repository.
>
> He did it few months ago. If you're on latest than you should have it.
>
>


It won't. All you will manage to do is burn your demodulator, if you happen
to
be that lucky one, with that change. At least a few people have burned
demodulators by now, from what i do see.


Regards,
Manu

[-- Attachment #1.2: Type: text/html, Size: 1404 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Faruk A]

On Mon, Jan 26, 2009 at 6:50 PM, Manu Abraham <abraham.manu@gmail.com> wrote:
>
>
> On Mon, Jan 26, 2009 at 8:19 PM, Alex Betis <alex.betis@gmail.com> wrote:
>>
>>> Latest changes I can see at
>>> http://mercurial.intuxication.org/hg/s2-liplianin/ were made about 7
>>> to 10 days ago. Is this correct? If that's correct, then I'm using
>>> latest Igor drivers. And behavior described above is what I'm getting.
>>>
>>> I can't see anything related do high SR channels on Igor repository.
>>
>> He did it few months ago. If you're on latest than you should have it.
>>
>
> It won't. All you will manage to do is burn your demodulator, if you happen
> to
> be that lucky one, with that change. At least a few people have burned
> demodulators by now, from what i do see.
>
>
> Regards,
> Manu
>

I don't know if the drivers or not but my card (TT S2-3650 CI) broke,
got my money back
from the company and i ordered a Tevii S650 from Germany which will
arrive this week.

Faruk

Re: [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Alex Betis]

[-- Attachment #1.1: Type: text/plain, Size: 1183 bytes --]

On Mon, Jan 26, 2009 at 7:50 PM, Manu Abraham <abraham.manu@gmail.com>wrote:

>
>
> On Mon, Jan 26, 2009 at 8:19 PM, Alex Betis <alex.betis@gmail.com> wrote:
>
>>
>> Latest changes I can see at
>>> http://mercurial.intuxication.org/hg/s2-liplianin/ were made about 7
>>> to 10 days ago. Is this correct? If that's correct, then I'm using
>>> latest Igor drivers. And behavior described above is what I'm getting.
>>>
>>> I can't see anything related do high SR channels on Igor repository.
>>
>> He did it few months ago. If you're on latest than you should have it.
>>
>>
>
>
> It won't. All you will manage to do is burn your demodulator, if you happen
> to
> be that lucky one, with that change. At least a few people have burned
> demodulators by now, from what i do see.
>
What are the symptoms of burned demodulator? How can someone know if its
still ok?

Does your mantis driver work ok with such channels?


>
>
> Regards,
> Manu
>
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux-media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>

[-- Attachment #1.2: Type: text/html, Size: 2515 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Manu Abraham]

Alex Betis wrote:
> On Mon, Jan 26, 2009 at 7:50 PM, Manu Abraham <abraham.manu@gmail.com>wrote:
> 
>>
>> On Mon, Jan 26, 2009 at 8:19 PM, Alex Betis <alex.betis@gmail.com> wrote:
>>
>>> Latest changes I can see at
>>>> http://mercurial.intuxication.org/hg/s2-liplianin/ were made about 7
>>>> to 10 days ago. Is this correct? If that's correct, then I'm using
>>>> latest Igor drivers. And behavior described above is what I'm getting.
>>>>
>>>> I can't see anything related do high SR channels on Igor repository.
>>> He did it few months ago. If you're on latest than you should have it.
>>>
>>>
>>
>> It won't. All you will manage to do is burn your demodulator, if you happen
>> to
>> be that lucky one, with that change. At least a few people have burned
>> demodulators by now, from what i do see.
>>
> What are the symptoms of burned demodulator? How can someone know if its
> still ok?

The first time i saw it was that the DVB-S2 demod was returning no
carrier. After some time it was stating timing error for DVB-S as
well. Finally it all ended up with demodulator I2C ACK failure, and
eventually a frozen machine after a week (my test boxes run throughout)

Touching the demodulator, i happened to have almost a burned finger.
I wanted to know whether this was a single case. During the
development phase, i did mention it to Julian about this, since he
was the very first person to test for the stb0899 driver. He
jovially laughed about a burned demodulator and a finger, left his
machine on after i did some tests on it. Eventually he too had the
same results. Finally we changed cards.

> 
> Does your mantis driver work ok with such channels?

I don't have such channels. Tested with a max of 27.5 MSPS

Regards,
Manu

Re: [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Alex Betis]

[-- Attachment #1.1: Type: text/plain, Size: 1815 bytes --]

On Tue, Jan 27, 2009 at 10:14 PM, Manu Abraham <abraham.manu@gmail.com>wrote:

> Alex Betis wrote:
> >> It won't. All you will manage to do is burn your demodulator, if you
> happen
> >> to
> >> be that lucky one, with that change. At least a few people have burned
> >> demodulators by now, from what i do see.
> >>
> > What are the symptoms of burned demodulator? How can someone know if its
> > still ok?
>
> The first time i saw it was that the DVB-S2 demod was returning no
> carrier. After some time it was stating timing error for DVB-S as
> well. Finally it all ended up with demodulator I2C ACK failure, and
> eventually a frozen machine after a week (my test boxes run throughout)
>
> Touching the demodulator, i happened to have almost a burned finger.
> I wanted to know whether this was a single case. During the
> development phase, i did mention it to Julian about this, since he
> was the very first person to test for the stb0899 driver. He
> jovially laughed about a burned demodulator and a finger, left his
> machine on after i did some tests on it. Eventually he too had the
> same results. Finally we changed cards.

What frequency did you use to burn it?

I didn't see anyone here on the list that reported a hardware failure so
far.

By the way, Igor returned the chip frequency for 27.5 channels to 99MHz and
raised it a bit for higher SR channels, so there is no danger for majority
of the users.


>
> >
> > Does your mantis driver work ok with such channels?
>
> I don't have such channels. Tested with a max of 27.5 MSPS
>
> Regards,
> Manu
>
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux-media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>

[-- Attachment #1.2: Type: text/html, Size: 2683 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Manu Abraham]

Alex Betis wrote:
> On Tue, Jan 27, 2009 at 10:14 PM, Manu Abraham <abraham.manu@gmail.com>wrote:
> 
>> Alex Betis wrote:
>>>> It won't. All you will manage to do is burn your demodulator, if you
>> happen
>>>> to
>>>> be that lucky one, with that change. At least a few people have burned
>>>> demodulators by now, from what i do see.
>>>>
>>> What are the symptoms of burned demodulator? How can someone know if its
>>> still ok?
>> The first time i saw it was that the DVB-S2 demod was returning no
>> carrier. After some time it was stating timing error for DVB-S as
>> well. Finally it all ended up with demodulator I2C ACK failure, and
>> eventually a frozen machine after a week (my test boxes run throughout)
>>
>> Touching the demodulator, i happened to have almost a burned finger.
>> I wanted to know whether this was a single case. During the
>> development phase, i did mention it to Julian about this, since he
>> was the very first person to test for the stb0899 driver. He
>> jovially laughed about a burned demodulator and a finger, left his
>> machine on after i did some tests on it. Eventually he too had the
>> same results. Finally we changed cards.
> 
> What frequency did you use to burn it?


It was a long time back, don't remember. It has nothing to do with
the frequency of the transponder, but just the master clock. You can
run it to a maximum of 108Mhz overclocked, 99Mhz to be safe and
sufficient.


> I didn't see anyone here on the list that reported a hardware failure so
> far.

May god help you. I didn't know that you knew more than the
demodulator manufacturer !


> By the way, Igor returned the chip frequency for 27.5 channels to 99MHz and
> raised it a bit for higher SR channels, so there is no danger for majority
> of the users.

Ok, be happy with his change and keep quiet. 135Mhz is out of bounds
of the hardware specification. You are on your own. Raising the
master clock, doesn't bring you any advantage.

>From your statement (and the patch), it is clearly evident that you
don't understand head or tail what you are stating or patched the
code for:

For a lower sampling frequency (aka Symbol rate), you need a higher
clock and or higher time period. For higher sampling rates (Symbol
Rates) the the master clock has to be decimated to  avoid overflows

This implies the patch to increase the master clock for acquisition
at a higher symbol rate was utter nonsense only.

All i have is to say:

Alas !

Re: [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Manu Abraham]

Manu Abraham wrote:

> For a lower sampling frequency (aka Symbol rate), you need a higher
> clock and or higher time period. For higher sampling rates (Symbol
> Rates) the the master clock has to be decimated to  avoid overflows

Sorry, an error in one part. ^^

For a lower SRATE, you need a lower clock and a longer period of
time. With a higher SRATE for the same coeffecients, you are bound
to overflow, unless you decimate certain register contents.
Recalculating those register values are quite tedious and lots of
calculations involved for a different master clock.

The result with a higher master clock (with the same coeffecients),
if you happened to see some positive results, it was the result of
some overflow or underflow, which is for sure.

Manu

Re: [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Alex Betis]

[-- Attachment #1.1: Type: text/plain, Size: 3827 bytes --]

On Tue, Jan 27, 2009 at 11:27 PM, Manu Abraham <abraham.manu@gmail.com>wrote:

> Alex Betis wrote:
> > On Tue, Jan 27, 2009 at 10:14 PM, Manu Abraham <abraham.manu@gmail.com
> >wrote:
> >
> >> Alex Betis wrote:
> >>>> It won't. All you will manage to do is burn your demodulator, if you
> >> happen
> >>>> to
> >>>> be that lucky one, with that change. At least a few people have burned
> >>>> demodulators by now, from what i do see.
> >>>>
> >>> What are the symptoms of burned demodulator? How can someone know if
> its
> >>> still ok?
> >> The first time i saw it was that the DVB-S2 demod was returning no
> >> carrier. After some time it was stating timing error for DVB-S as
> >> well. Finally it all ended up with demodulator I2C ACK failure, and
> >> eventually a frozen machine after a week (my test boxes run throughout)
> >>
> >> Touching the demodulator, i happened to have almost a burned finger.
> >> I wanted to know whether this was a single case. During the
> >> development phase, i did mention it to Julian about this, since he
> >> was the very first person to test for the stb0899 driver. He
> >> jovially laughed about a burned demodulator and a finger, left his
> >> machine on after i did some tests on it. Eventually he too had the
> >> same results. Finally we changed cards.
> >
> > What frequency did you use to burn it?
>
>
> It was a long time back, don't remember. It has nothing to do with
> the frequency of the transponder, but just the master clock. You can
> run it to a maximum of 108Mhz overclocked, 99Mhz to be safe and
> sufficient.
>
>
> > I didn't see anyone here on the list that reported a hardware failure so
> > far.
>
> May god help you. I didn't know that you knew more than the
> demodulator manufacturer !

Please speak for yourself, I never said I know more than a manufacturer.
I wrote a fact.
Intel also rate their chips and everybody overclocks them to crazy ratings.


>
>
>
> > By the way, Igor returned the chip frequency for 27.5 channels to 99MHz
> and
> > raised it a bit for higher SR channels, so there is no danger for
> majority
> > of the users.
>
> Ok, be happy with his change and keep quiet. 135Mhz is out of bounds
> of the hardware specification. You are on your own. Raising the
> master clock, doesn't bring you any advantage.

Did someone overclock you as well?
Chill out!
It would be better if you'll be more productive instead of quieting people
who try to help.

Again, I'm commenting facts. As I saw from the reports the overclock seems
to help with the problem.


>
> From your statement (and the patch), it is clearly evident that you
> don't understand head or tail what you are stating or patched the
> code for:

So be so kind, and add comments to the code you write so everybody could
find its head and tail when trying to fix bugs.
It is clearly evident that you don't really want that someone else will
understand your code.

Again, facts are that the patch help and make the device more stable for
DVB-S channels.



Oh well, I hate that I had to get so low with my message, but that's that
happen when someone try to align with your expressions.
In case you didn't know, you're not alone in the universe, get used to it.


>
> For a lower sampling frequency (aka Symbol rate), you need a higher
> clock and or higher time period. For higher sampling rates (Symbol
> Rates) the the master clock has to be decimated to  avoid overflows
>
> This implies the patch to increase the master clock for acquisition
> at a higher symbol rate was utter nonsense only.
>
> All i have is to say:
>
> Alas !
>
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux-media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>

[-- Attachment #1.2: Type: text/html, Size: 5330 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Manu Abraham]

Alex Betis wrote:
> On Tue, Jan 27, 2009 at 11:27 PM, Manu Abraham <abraham.manu@gmail.com>wrote:
> 
>> Alex Betis wrote:
>>> On Tue, Jan 27, 2009 at 10:14 PM, Manu Abraham <abraham.manu@gmail.com
>>> wrote:
>>>
>>>> Alex Betis wrote:
>>>>>> It won't. All you will manage to do is burn your demodulator, if you
>>>> happen
>>>>>> to
>>>>>> be that lucky one, with that change. At least a few people have burned
>>>>>> demodulators by now, from what i do see.
>>>>>>
>>>>> What are the symptoms of burned demodulator? How can someone know if
>> its
>>>>> still ok?
>>>> The first time i saw it was that the DVB-S2 demod was returning no
>>>> carrier. After some time it was stating timing error for DVB-S as
>>>> well. Finally it all ended up with demodulator I2C ACK failure, and
>>>> eventually a frozen machine after a week (my test boxes run throughout)
>>>>
>>>> Touching the demodulator, i happened to have almost a burned finger.
>>>> I wanted to know whether this was a single case. During the
>>>> development phase, i did mention it to Julian about this, since he
>>>> was the very first person to test for the stb0899 driver. He
>>>> jovially laughed about a burned demodulator and a finger, left his
>>>> machine on after i did some tests on it. Eventually he too had the
>>>> same results. Finally we changed cards.
>>> What frequency did you use to burn it?
>>
>> It was a long time back, don't remember. It has nothing to do with
>> the frequency of the transponder, but just the master clock. You can
>> run it to a maximum of 108Mhz overclocked, 99Mhz to be safe and
>> sufficient.
>>
>>
>>> I didn't see anyone here on the list that reported a hardware failure so
>>> far.
>> May god help you. I didn't know that you knew more than the
>> demodulator manufacturer !
> 
> Please speak for yourself, I never said I know more than a manufacturer.
> I wrote a fact.
> Intel also rate their chips and everybody overclocks them to crazy ratings.
> 
> 
>>
>>
>>> By the way, Igor returned the chip frequency for 27.5 channels to 99MHz
>> and
>>> raised it a bit for higher SR channels, so there is no danger for
>> majority
>>> of the users.
>> Ok, be happy with his change and keep quiet. 135Mhz is out of bounds
>> of the hardware specification. You are on your own. Raising the
>> master clock, doesn't bring you any advantage.
> 
> Did someone overclock you as well?
> Chill out!
> It would be better if you'll be more productive instead of quieting people
> who try to help.
> 
> Again, I'm commenting facts. As I saw from the reports the overclock seems
> to help with the problem.
> 
> 
>> From your statement (and the patch), it is clearly evident that you
>> don't understand head or tail what you are stating or patched the
>> code for:
> 
> So be so kind, and add comments to the code you write so everybody could
> find its head and tail when trying to fix bugs.
> It is clearly evident that you don't really want that someone else will
> understand your code.
> 
> Again, facts are that the patch help and make the device more stable for
> DVB-S channels.
> 
> 
> 
> Oh well, I hate that I had to get so low with my message, but that's that
> happen when someone try to align with your expressions.
> In case you didn't know, you're not alone in the universe, get used to it.

I should be the one who should be kicked for trying to help you.

Re: [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[n37]

On Wed, Jan 28, 2009 at 1:02 AM, Manu Abraham <abraham.manu@gmail.com> wrote:
> Alex Betis wrote:
>> On Tue, Jan 27, 2009 at 11:27 PM, Manu Abraham <abraham.manu@gmail.com>wrote:
>>
>>> Alex Betis wrote:
>>>> On Tue, Jan 27, 2009 at 10:14 PM, Manu Abraham <abraham.manu@gmail.com
>>>> wrote:
>>>>
>>>>> Alex Betis wrote:
>>>>>>> It won't. All you will manage to do is burn your demodulator, if you
>>>>> happen
>>>>>>> to
>>>>>>> be that lucky one, with that change. At least a few people have burned
>>>>>>> demodulators by now, from what i do see.
>>>>>>>
>>>>>> What are the symptoms of burned demodulator? How can someone know if
>>> its
>>>>>> still ok?
>>>>> The first time i saw it was that the DVB-S2 demod was returning no
>>>>> carrier. After some time it was stating timing error for DVB-S as
>>>>> well. Finally it all ended up with demodulator I2C ACK failure, and
>>>>> eventually a frozen machine after a week (my test boxes run throughout)
>>>>>
>>>>> Touching the demodulator, i happened to have almost a burned finger.
>>>>> I wanted to know whether this was a single case. During the
>>>>> development phase, i did mention it to Julian about this, since he
>>>>> was the very first person to test for the stb0899 driver. He
>>>>> jovially laughed about a burned demodulator and a finger, left his
>>>>> machine on after i did some tests on it. Eventually he too had the
>>>>> same results. Finally we changed cards.
>>>> What frequency did you use to burn it?
>>>
>>> It was a long time back, don't remember. It has nothing to do with
>>> the frequency of the transponder, but just the master clock. You can
>>> run it to a maximum of 108Mhz overclocked, 99Mhz to be safe and
>>> sufficient.
>>>
>>>
>>>> I didn't see anyone here on the list that reported a hardware failure so
>>>> far.
>>> May god help you. I didn't know that you knew more than the
>>> demodulator manufacturer !
>>
>> Please speak for yourself, I never said I know more than a manufacturer.
>> I wrote a fact.
>> Intel also rate their chips and everybody overclocks them to crazy ratings.
>>
>>
>>>
>>>
>>>> By the way, Igor returned the chip frequency for 27.5 channels to 99MHz
>>> and
>>>> raised it a bit for higher SR channels, so there is no danger for
>>> majority
>>>> of the users.
>>> Ok, be happy with his change and keep quiet. 135Mhz is out of bounds
>>> of the hardware specification. You are on your own. Raising the
>>> master clock, doesn't bring you any advantage.
>>
>> Did someone overclock you as well?
>> Chill out!
>> It would be better if you'll be more productive instead of quieting people
>> who try to help.
>>
>> Again, I'm commenting facts. As I saw from the reports the overclock seems
>> to help with the problem.
>>
>>
>>> From your statement (and the patch), it is clearly evident that you
>>> don't understand head or tail what you are stating or patched the
>>> code for:
>>
>> So be so kind, and add comments to the code you write so everybody could
>> find its head and tail when trying to fix bugs.
>> It is clearly evident that you don't really want that someone else will
>> understand your code.
>>
>> Again, facts are that the patch help and make the device more stable for
>> DVB-S channels.
>>
>>
>>
>> Oh well, I hate that I had to get so low with my message, but that's that
>> happen when someone try to align with your expressions.
>> In case you didn't know, you're not alone in the universe, get used to it.
>
> I should be the one who should be kicked for trying to help you.
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux-media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>

I am writing just to share my experience with tt3200 drivers. The
following are just observations about the behavior of my card:

1. The card has never tuned reliably with the v4l-dvb s2api driver or
the multiproto driver. This concerns not just high rate dvb-s2
transponders but also some plain dvb-s transponders as well. And this
is not just random hiccups but consistent behavior. German Eurosport @
19.2e is a prime example.
2. When Igor first increased the high clock to 135MHz, there was a
marked improvement. All of the tuning issues were gone. However I am
using a rotor and the higher clock rate somehow broke rotor control.
3. Next Igor backed down the high clock to 99MHz and introduced a
"very high clock" of 135MHz. Tuning went back to unreliable. Rotor
control was ok.
4. I bought a hvr4000. And now all of my issues are gone.

Re : [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Manu]

Le 28.01.2009 07:03:00, n37 a écrit :
> On Wed, Jan 28, 2009 at 1:02 AM, Manu Abraham 
> <abraham.manu@gmail.com>
> wrote:
> > Alex Betis wrote:
> >> On Tue, Jan 27, 2009 at 11:27 PM, Manu Abraham
> <abraham.manu@gmail.com>wrote:
> >>
> >>> Alex Betis wrote:
> >>>> On Tue, Jan 27, 2009 at 10:14 PM, Manu Abraham
> <abraham.manu@gmail.com
> >>>> wrote:
> >>>>
> >>>>> Alex Betis wrote:
> >>>>>>> It won't. All you will manage to do is burn your demodulator,
> if you
> >>>>> happen
> >>>>>>> to
> >>>>>>> be that lucky one, with that change. At least a few people
> have burned
> >>>>>>> demodulators by now, from what i do see.
> >>>>>>>
> >>>>>> What are the symptoms of burned demodulator? How can someone
> know if
> >>> its
> >>>>>> still ok?
> >>>>> The first time i saw it was that the DVB-S2 demod was returning
> no
> >>>>> carrier. After some time it was stating timing error for DVB-S
> as
> >>>>> well. Finally it all ended up with demodulator I2C ACK failure,
> and
> >>>>> eventually a frozen machine after a week (my test boxes run
> throughout)
> >>>>>
> >>>>> Touching the demodulator, i happened to have almost a burned
> finger.
> >>>>> I wanted to know whether this was a single case. During the
> >>>>> development phase, i did mention it to Julian about this, since
> he
> >>>>> was the very first person to test for the stb0899 driver. He
> >>>>> jovially laughed about a burned demodulator and a finger, left
> his
> >>>>> machine on after i did some tests on it. Eventually he too had
> the
> >>>>> same results. Finally we changed cards.
> >>>> What frequency did you use to burn it?
> >>>
> >>> It was a long time back, don't remember. It has nothing to do 
> with
> >>> the frequency of the transponder, but just the master clock. You
> can
> >>> run it to a maximum of 108Mhz overclocked, 99Mhz to be safe and
> >>> sufficient.
> >>>
> >>>
> >>>> I didn't see anyone here on the list that reported a hardware
> failure so
> >>>> far.
> >>> May god help you. I didn't know that you knew more than the
> >>> demodulator manufacturer !
> >>
> >> Please speak for yourself, I never said I know more than a
> manufacturer.
> >> I wrote a fact.
> >> Intel also rate their chips and everybody overclocks them to crazy
> ratings.
> >>
> >>
> >>>
> >>>
> >>>> By the way, Igor returned the chip frequency for 27.5 channels 
> to
> 99MHz
> >>> and
> >>>> raised it a bit for higher SR channels, so there is no danger 
> for
> >>> majority
> >>>> of the users.
> >>> Ok, be happy with his change and keep quiet. 135Mhz is out of
> bounds
> >>> of the hardware specification. You are on your own. Raising the
> >>> master clock, doesn't bring you any advantage.
> >>
> >> Did someone overclock you as well?
> >> Chill out!
> >> It would be better if you'll be more productive instead of 
> quieting
> people
> >> who try to help.
> >>
> >> Again, I'm commenting facts. As I saw from the reports the
> overclock seems
> >> to help with the problem.
> >>
> >>
> >>> From your statement (and the patch), it is clearly evident that
> you
> >>> don't understand head or tail what you are stating or patched the
> >>> code for:
> >>
> >> So be so kind, and add comments to the code you write so everybody
> could
> >> find its head and tail when trying to fix bugs.
> >> It is clearly evident that you don't really want that someone else
> will
> >> understand your code.
> >>
> >> Again, facts are that the patch help and make the device more
> stable for
> >> DVB-S channels.
> >>
> >>
> >>
> >> Oh well, I hate that I had to get so low with my message, but
> that's that
> >> happen when someone try to align with your expressions.
> >> In case you didn't know, you're not alone in the universe, get 
> used
> to it.
> >
> > I should be the one who should be kicked for trying to help you.
> >
> > _______________________________________________
> > linux-dvb users mailing list
> > For V4L/DVB development, please use instead
> linux-media@vger.kernel.org
> > linux-dvb@linuxtv.org
> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> >
> 
> I am writing just to share my experience with tt3200 drivers. The
> following are just observations about the behavior of my card:
> 
> 1. The card has never tuned reliably with the v4l-dvb s2api driver or
> the multiproto driver. This concerns not just high rate dvb-s2
> transponders but also some plain dvb-s transponders as well. And this
> is not just random hiccups but consistent behavior. German Eurosport 
> @
> 19.2e is a prime example.
> 2. When Igor first increased the high clock to 135MHz, there was a
> marked improvement. All of the tuning issues were gone. However I am
> using a rotor and the higher clock rate somehow broke rotor control.
> 3. Next Igor backed down the high clock to 99MHz and introduced a
> "very high clock" of 135MHz. Tuning went back to unreliable. Rotor
> control was ok.
> 4. I bought a hvr4000. And now all of my issues are gone.

I am thinking about it also :(
Does it work reliably with dvb-s/s2 and CAM?
Thx
Bye
Manu

Re : [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[crow]

Hi,
I have also TT-3200 and would like to have driver which are not able
to burn anything, but to WORK as they should. I am currently using
liplianindvb repository, because it seems only one working with my
card. To bad that they have code which "can burn demodulator" in some
case, as i don't wanna that. Well till now i have had luck then seems
so, but....
I can use multiproto driver to but they should work OK with tt-3200 (i
can test them to if needed) have only Astra 19.2E and Hotbird 13.0.

There should be also respect to ppl who build driver and stuff we are
using, and Thank to them.

Re: Re : [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Manu Abraham]

crow wrote:
> Hi,
> I have also TT-3200 and would like to have driver which are not able
> to burn anything, but to WORK as they should. I am currently using
> liplianindvb repository, because it seems only one working with my
> card. To bad that they have code which "can burn demodulator" in some
> case, as i don't wanna that. Well till now i have had luck then seems
> so, but....
> I can use multiproto driver to but they should work OK with tt-3200 (i
> can test them to if needed) have only Astra 19.2E and Hotbird 13.0.

You can use either multiproto or S2API according to your desire.
The S2API based driver is found here: http://jusst.de/hg/v4l-dvb

If you want to try the multiproto version the driver is found here:
http://jusst.de/hg/multiproto

Please do a vanilla test of the v4l-dvb tree (from jusst.de),
whether you see any further difference.

Please try the changes that which i posted on top of the multiproto
or the v4l-dvb tree and test your changes.

You can test with loading the modules with the verbose=5 option,
such that you can see what's happening internally.

To test, rather than doing a scan, you should try doing a szap,
since it is better for testing and to find issues. Testing with scan
 will not help much as there will be other issues involved in it as
well.

Regards,
Manu

Re: Re : [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Goga777]

> > I am writing just to share my experience with tt3200 drivers. The
> > following are just observations about the behavior of my card:
> > 
> > 1. The card has never tuned reliably with the v4l-dvb s2api driver or
> > the multiproto driver. This concerns not just high rate dvb-s2
> > transponders but also some plain dvb-s transponders as well. And this
> > is not just random hiccups but consistent behavior. German Eurosport 
> > @
> > 19.2e is a prime example.
> > 2. When Igor first increased the high clock to 135MHz, there was a
> > marked improvement. All of the tuning issues were gone. However I am
> > using a rotor and the higher clock rate somehow broke rotor control.
> > 3. Next Igor backed down the high clock to 99MHz and introduced a
> > "very high clock" of 135MHz. Tuning went back to unreliable. Rotor
> > control was ok.
> > 4. I bought a hvr4000. And now all of my issues are gone.
> 
> I am thinking about it also :(
> Does it work reliably with dvb-s/s2 and CAM?

concerning of dvb-s/s2 - yes it works well
concerning of CAM - I didn't check,  I don't know

Goga

Re: Re : [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Manu Abraham]

Manu wrote:
> Le 28.01.2009 07:03:00, n37 a écrit :
>> On Wed, Jan 28, 2009 at 1:02 AM, Manu Abraham 
>> <abraham.manu@gmail.com>
>> wrote:
>>> Alex Betis wrote:
>>>> On Tue, Jan 27, 2009 at 11:27 PM, Manu Abraham
>> <abraham.manu@gmail.com>wrote:
>>>>> Alex Betis wrote:
>>>>>> On Tue, Jan 27, 2009 at 10:14 PM, Manu Abraham
>> <abraham.manu@gmail.com
>>>>>> wrote:
>>>>>>
>>>>>>> Alex Betis wrote:
>>>>>>>>> It won't. All you will manage to do is burn your demodulator,
>> if you
>>>>>>> happen
>>>>>>>>> to
>>>>>>>>> be that lucky one, with that change. At least a few people
>> have burned
>>>>>>>>> demodulators by now, from what i do see.
>>>>>>>>>
>>>>>>>> What are the symptoms of burned demodulator? How can someone
>> know if
>>>>> its
>>>>>>>> still ok?
>>>>>>> The first time i saw it was that the DVB-S2 demod was returning
>> no
>>>>>>> carrier. After some time it was stating timing error for DVB-S
>> as
>>>>>>> well. Finally it all ended up with demodulator I2C ACK failure,
>> and
>>>>>>> eventually a frozen machine after a week (my test boxes run
>> throughout)
>>>>>>> Touching the demodulator, i happened to have almost a burned
>> finger.
>>>>>>> I wanted to know whether this was a single case. During the
>>>>>>> development phase, i did mention it to Julian about this, since
>> he
>>>>>>> was the very first person to test for the stb0899 driver. He
>>>>>>> jovially laughed about a burned demodulator and a finger, left
>> his
>>>>>>> machine on after i did some tests on it. Eventually he too had
>> the
>>>>>>> same results. Finally we changed cards.
>>>>>> What frequency did you use to burn it?
>>>>> It was a long time back, don't remember. It has nothing to do 
>> with
>>>>> the frequency of the transponder, but just the master clock. You
>> can
>>>>> run it to a maximum of 108Mhz overclocked, 99Mhz to be safe and
>>>>> sufficient.
>>>>>
>>>>>
>>>>>> I didn't see anyone here on the list that reported a hardware
>> failure so
>>>>>> far.
>>>>> May god help you. I didn't know that you knew more than the
>>>>> demodulator manufacturer !
>>>> Please speak for yourself, I never said I know more than a
>> manufacturer.
>>>> I wrote a fact.
>>>> Intel also rate their chips and everybody overclocks them to crazy
>> ratings.
>>>>
>>>>>
>>>>>> By the way, Igor returned the chip frequency for 27.5 channels 
>> to
>> 99MHz
>>>>> and
>>>>>> raised it a bit for higher SR channels, so there is no danger 
>> for
>>>>> majority
>>>>>> of the users.
>>>>> Ok, be happy with his change and keep quiet. 135Mhz is out of
>> bounds
>>>>> of the hardware specification. You are on your own. Raising the
>>>>> master clock, doesn't bring you any advantage.
>>>> Did someone overclock you as well?
>>>> Chill out!
>>>> It would be better if you'll be more productive instead of 
>> quieting
>> people
>>>> who try to help.
>>>>
>>>> Again, I'm commenting facts. As I saw from the reports the
>> overclock seems
>>>> to help with the problem.
>>>>
>>>>
>>>>> From your statement (and the patch), it is clearly evident that
>> you
>>>>> don't understand head or tail what you are stating or patched the
>>>>> code for:
>>>> So be so kind, and add comments to the code you write so everybody
>> could
>>>> find its head and tail when trying to fix bugs.
>>>> It is clearly evident that you don't really want that someone else
>> will
>>>> understand your code.
>>>>
>>>> Again, facts are that the patch help and make the device more
>> stable for
>>>> DVB-S channels.
>>>>
>>>>
>>>>
>>>> Oh well, I hate that I had to get so low with my message, but
>> that's that
>>>> happen when someone try to align with your expressions.
>>>> In case you didn't know, you're not alone in the universe, get 
>> used
>> to it.
>>> I should be the one who should be kicked for trying to help you.
>>>
>>> _______________________________________________
>>> linux-dvb users mailing list
>>> For V4L/DVB development, please use instead
>> linux-media@vger.kernel.org
>>> linux-dvb@linuxtv.org
>>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>>>
>> I am writing just to share my experience with tt3200 drivers. The
>> following are just observations about the behavior of my card:
>>
>> 1. The card has never tuned reliably with the v4l-dvb s2api driver or
>> the multiproto driver. This concerns not just high rate dvb-s2
>> transponders but also some plain dvb-s transponders as well. And this
>> is not just random hiccups but consistent behavior. German Eurosport 
>> @
>> 19.2e is a prime example.
>> 2. When Igor first increased the high clock to 135MHz, there was a
>> marked improvement. All of the tuning issues were gone. However I am
>> using a rotor and the higher clock rate somehow broke rotor control.
>> 3. Next Igor backed down the high clock to 99MHz and introduced a
>> "very high clock" of 135MHz. Tuning went back to unreliable. Rotor
>> control was ok.
>> 4. I bought a hvr4000. And now all of my issues are gone.
> 
> I am thinking about it also :(

You are free to choose whatever hardware you want.

In your last post you wrote, you wanted some fixes to get going. Now
when there are fixes to test, you don't want to test .. ??


Regards,
Manu

Re : Re : [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Manu]

Le 28.01.2009 15:52:26, Manu Abraham a écrit :
> Manu wrote:
> > Le 28.01.2009 07:03:00, n37 a écrit :
> >> On Wed, Jan 28, 2009 at 1:02 AM, Manu Abraham 
> >> <abraham.manu@gmail.com>
> >> wrote:
> >>> Alex Betis wrote:
> >>>> On Tue, Jan 27, 2009 at 11:27 PM, Manu Abraham
> >> <abraham.manu@gmail.com>wrote:
> >>>>> Alex Betis wrote:
> >>>>>> On Tue, Jan 27, 2009 at 10:14 PM, Manu Abraham
> >> <abraham.manu@gmail.com
> >>>>>> wrote:
> >>>>>>
> >>>>>>> Alex Betis wrote:
> >>>>>>>>> It won't. All you will manage to do is burn your
> demodulator,
> >> if you
> >>>>>>> happen
> >>>>>>>>> to
> >>>>>>>>> be that lucky one, with that change. At least a few people
> >> have burned
> >>>>>>>>> demodulators by now, from what i do see.
> >>>>>>>>>
> >>>>>>>> What are the symptoms of burned demodulator? How can someone
> >> know if
> >>>>> its
> >>>>>>>> still ok?
> >>>>>>> The first time i saw it was that the DVB-S2 demod was
> returning
> >> no
> >>>>>>> carrier. After some time it was stating timing error for DVB-
> S
> >> as
> >>>>>>> well. Finally it all ended up with demodulator I2C ACK
> failure,
> >> and
> >>>>>>> eventually a frozen machine after a week (my test boxes run
> >> throughout)
> >>>>>>> Touching the demodulator, i happened to have almost a burned
> >> finger.
> >>>>>>> I wanted to know whether this was a single case. During the
> >>>>>>> development phase, i did mention it to Julian about this,
> since
> >> he
> >>>>>>> was the very first person to test for the stb0899 driver. He
> >>>>>>> jovially laughed about a burned demodulator and a finger, 
> left
> >> his
> >>>>>>> machine on after i did some tests on it. Eventually he too 
> had
> >> the
> >>>>>>> same results. Finally we changed cards.
> >>>>>> What frequency did you use to burn it?
> >>>>> It was a long time back, don't remember. It has nothing to do 
> >> with
> >>>>> the frequency of the transponder, but just the master clock. 
> You
> >> can
> >>>>> run it to a maximum of 108Mhz overclocked, 99Mhz to be safe and
> >>>>> sufficient.
> >>>>>
> >>>>>
> >>>>>> I didn't see anyone here on the list that reported a hardware
> >> failure so
> >>>>>> far.
> >>>>> May god help you. I didn't know that you knew more than the
> >>>>> demodulator manufacturer !
> >>>> Please speak for yourself, I never said I know more than a
> >> manufacturer.
> >>>> I wrote a fact.
> >>>> Intel also rate their chips and everybody overclocks them to
> crazy
> >> ratings.
> >>>>
> >>>>>
> >>>>>> By the way, Igor returned the chip frequency for 27.5 channels 
> >> to
> >> 99MHz
> >>>>> and
> >>>>>> raised it a bit for higher SR channels, so there is no danger 
> >> for
> >>>>> majority
> >>>>>> of the users.
> >>>>> Ok, be happy with his change and keep quiet. 135Mhz is out of
> >> bounds
> >>>>> of the hardware specification. You are on your own. Raising the
> >>>>> master clock, doesn't bring you any advantage.
> >>>> Did someone overclock you as well?
> >>>> Chill out!
> >>>> It would be better if you'll be more productive instead of 
> >> quieting
> >> people
> >>>> who try to help.
> >>>>
> >>>> Again, I'm commenting facts. As I saw from the reports the
> >> overclock seems
> >>>> to help with the problem.
> >>>>
> >>>>
> >>>>> From your statement (and the patch), it is clearly evident that
> >> you
> >>>>> don't understand head or tail what you are stating or patched
> the
> >>>>> code for:
> >>>> So be so kind, and add comments to the code you write so
> everybody
> >> could
> >>>> find its head and tail when trying to fix bugs.
> >>>> It is clearly evident that you don't really want that someone
> else
> >> will
> >>>> understand your code.
> >>>>
> >>>> Again, facts are that the patch help and make the device more
> >> stable for
> >>>> DVB-S channels.
> >>>>
> >>>>
> >>>>
> >>>> Oh well, I hate that I had to get so low with my message, but
> >> that's that
> >>>> happen when someone try to align with your expressions.
> >>>> In case you didn't know, you're not alone in the universe, get 
> >> used
> >> to it.
> >>> I should be the one who should be kicked for trying to help you.
> >>>
> >>> _______________________________________________
> >>> linux-dvb users mailing list
> >>> For V4L/DVB development, please use instead
> >> linux-media@vger.kernel.org
> >>> linux-dvb@linuxtv.org
> >>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> >>>
> >> I am writing just to share my experience with tt3200 drivers. The
> >> following are just observations about the behavior of my card:
> >>
> >> 1. The card has never tuned reliably with the v4l-dvb s2api driver
> or
> >> the multiproto driver. This concerns not just high rate dvb-s2
> >> transponders but also some plain dvb-s transponders as well. And
> this
> >> is not just random hiccups but consistent behavior. German
> Eurosport 
> >> @
> >> 19.2e is a prime example.
> >> 2. When Igor first increased the high clock to 135MHz, there was a
> >> marked improvement. All of the tuning issues were gone. However I
> am
> >> using a rotor and the higher clock rate somehow broke rotor
> control.
> >> 3. Next Igor backed down the high clock to 99MHz and introduced a
> >> "very high clock" of 135MHz. Tuning went back to unreliable. Rotor
> >> control was ok.
> >> 4. I bought a hvr4000. And now all of my issues are gone.
> > 
> > I am thinking about it also :(
> 
> You are free to choose whatever hardware you want.
> 
> In your last post you wrote, you wanted some fixes to get going. Now
> when there are fixes to test, you don't want to test .. ??

Manu, I am trying your patch with latest multiproto with no luck so 
far. I need a bit more time though to make sure the frequency I have is 
not a bit off (that already happened) so I need to test several freq (I 
am using szap and simpledvbtune BTW, I hope these are the right tools).
I do hope to sort these issues with your help.
Bye
Manu

Re : Re : [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Manu]

Le 28.01.2009 15:52:26, Manu Abraham a écrit :
> Manu wrote:
> > Le 28.01.2009 07:03:00, n37 a écrit :
> >> On Wed, Jan 28, 2009 at 1:02 AM, Manu Abraham 
> >> <abraham.manu@gmail.com>
> >> wrote:
> >>> Alex Betis wrote:
> >>>> On Tue, Jan 27, 2009 at 11:27 PM, Manu Abraham
> >> <abraham.manu@gmail.com>wrote:
> >>>>> Alex Betis wrote:
> >>>>>> On Tue, Jan 27, 2009 at 10:14 PM, Manu Abraham
> >> <abraham.manu@gmail.com
> >>>>>> wrote:
> >>>>>>
> >>>>>>> Alex Betis wrote:
> >>>>>>>>> It won't. All you will manage to do is burn your
> demodulator,
> >> if you
> >>>>>>> happen
> >>>>>>>>> to
> >>>>>>>>> be that lucky one, with that change. At least a few people
> >> have burned
> >>>>>>>>> demodulators by now, from what i do see.
> >>>>>>>>>
> >>>>>>>> What are the symptoms of burned demodulator? How can someone
> >> know if
> >>>>> its
> >>>>>>>> still ok?
> >>>>>>> The first time i saw it was that the DVB-S2 demod was
> returning
> >> no
> >>>>>>> carrier. After some time it was stating timing error for DVB-
> S
> >> as
> >>>>>>> well. Finally it all ended up with demodulator I2C ACK
> failure,
> >> and
> >>>>>>> eventually a frozen machine after a week (my test boxes run
> >> throughout)
> >>>>>>> Touching the demodulator, i happened to have almost a burned
> >> finger.
> >>>>>>> I wanted to know whether this was a single case. During the
> >>>>>>> development phase, i did mention it to Julian about this,
> since
> >> he
> >>>>>>> was the very first person to test for the stb0899 driver. He
> >>>>>>> jovially laughed about a burned demodulator and a finger, 
> left
> >> his
> >>>>>>> machine on after i did some tests on it. Eventually he too 
> had
> >> the
> >>>>>>> same results. Finally we changed cards.
> >>>>>> What frequency did you use to burn it?
> >>>>> It was a long time back, don't remember. It has nothing to do 
> >> with
> >>>>> the frequency of the transponder, but just the master clock. 
> You
> >> can
> >>>>> run it to a maximum of 108Mhz overclocked, 99Mhz to be safe and
> >>>>> sufficient.
> >>>>>
> >>>>>
> >>>>>> I didn't see anyone here on the list that reported a hardware
> >> failure so
> >>>>>> far.
> >>>>> May god help you. I didn't know that you knew more than the
> >>>>> demodulator manufacturer !
> >>>> Please speak for yourself, I never said I know more than a
> >> manufacturer.
> >>>> I wrote a fact.
> >>>> Intel also rate their chips and everybody overclocks them to
> crazy
> >> ratings.
> >>>>
> >>>>>
> >>>>>> By the way, Igor returned the chip frequency for 27.5 channels 
> >> to
> >> 99MHz
> >>>>> and
> >>>>>> raised it a bit for higher SR channels, so there is no danger 
> >> for
> >>>>> majority
> >>>>>> of the users.
> >>>>> Ok, be happy with his change and keep quiet. 135Mhz is out of
> >> bounds
> >>>>> of the hardware specification. You are on your own. Raising the
> >>>>> master clock, doesn't bring you any advantage.
> >>>> Did someone overclock you as well?
> >>>> Chill out!
> >>>> It would be better if you'll be more productive instead of 
> >> quieting
> >> people
> >>>> who try to help.
> >>>>
> >>>> Again, I'm commenting facts. As I saw from the reports the
> >> overclock seems
> >>>> to help with the problem.
> >>>>
> >>>>
> >>>>> From your statement (and the patch), it is clearly evident that
> >> you
> >>>>> don't understand head or tail what you are stating or patched
> the
> >>>>> code for:
> >>>> So be so kind, and add comments to the code you write so
> everybody
> >> could
> >>>> find its head and tail when trying to fix bugs.
> >>>> It is clearly evident that you don't really want that someone
> else
> >> will
> >>>> understand your code.
> >>>>
> >>>> Again, facts are that the patch help and make the device more
> >> stable for
> >>>> DVB-S channels.
> >>>>
> >>>>
> >>>>
> >>>> Oh well, I hate that I had to get so low with my message, but
> >> that's that
> >>>> happen when someone try to align with your expressions.
> >>>> In case you didn't know, you're not alone in the universe, get 
> >> used
> >> to it.
> >>> I should be the one who should be kicked for trying to help you.
> >>>
> >>> _______________________________________________
> >>> linux-dvb users mailing list
> >>> For V4L/DVB development, please use instead
> >> linux-media@vger.kernel.org
> >>> linux-dvb@linuxtv.org
> >>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> >>>
> >> I am writing just to share my experience with tt3200 drivers. The
> >> following are just observations about the behavior of my card:
> >>
> >> 1. The card has never tuned reliably with the v4l-dvb s2api driver
> or
> >> the multiproto driver. This concerns not just high rate dvb-s2
> >> transponders but also some plain dvb-s transponders as well. And
> this
> >> is not just random hiccups but consistent behavior. German
> Eurosport 
> >> @
> >> 19.2e is a prime example.
> >> 2. When Igor first increased the high clock to 135MHz, there was a
> >> marked improvement. All of the tuning issues were gone. However I
> am
> >> using a rotor and the higher clock rate somehow broke rotor
> control.
> >> 3. Next Igor backed down the high clock to 99MHz and introduced a
> >> "very high clock" of 135MHz. Tuning went back to unreliable. Rotor
> >> control was ok.
> >> 4. I bought a hvr4000. And now all of my issues are gone.
> > 
> > I am thinking about it also :(
> 
> You are free to choose whatever hardware you want.
> 
> In your last post you wrote, you wanted some fixes to get going. Now
> when there are fixes to test, you don't want to test .. ??

Sorry, bad news: no lock though I tried 11493 to 11500 MHz. Is it 
possible that this is because of the FEC not being detected? I am out 
of idea here, hope you can help.
Bye
Manu

Re : [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Manu]

Le 26.01.2009 13:50:24, Manu Abraham a écrit :
> On Mon, Jan 26, 2009 at 8:19 PM, Alex Betis <alex.betis@gmail.com>
> wrote:
> 
> >
> > Latest changes I can see at
> >> http://mercurial.intuxication.org/hg/s2-liplianin/ were made about
> 7
> >> to 10 days ago. Is this correct? If that's correct, then I'm using
> >> latest Igor drivers. And behavior described above is what I'm
> getting.
> >>
> >> I can't see anything related do high SR channels on Igor
> repository.
> >
> > He did it few months ago. If you're on latest than you should have
> it.
> >
> >
> 
> 
> It won't. All you will manage to do is burn your demodulator, if you
> happen
> to
> be that lucky one, with that change. At least a few people have 
> burned
> demodulators by now, from what i do see.

Hmm OK, but is there by any chance a fix for those issues somewhere or 
in the pipe at least? I am willing to test (as I already offered), I 
can compile the drivers, spread printk or whatever else is needed to 
get useful reports. Let me know if I can help sort this problem. BTW in 
my case it is DVB-S2 30000 SR and FEC 5/6.
Thx
Bye
Manu

Re: [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Chris Silva]

On Mon, Jan 26, 2009 at 5:50 PM, Manu Abraham <abraham.manu@gmail.com> wrote:
>
>
> On Mon, Jan 26, 2009 at 8:19 PM, Alex Betis <alex.betis@gmail.com> wrote:
>>
>>> Latest changes I can see at
>>> http://mercurial.intuxication.org/hg/s2-liplianin/ were made about 7
>>> to 10 days ago. Is this correct? If that's correct, then I'm using
>>> latest Igor drivers. And behavior described above is what I'm getting.
>>>
>>> I can't see anything related do high SR channels on Igor repository.
>>
>> He did it few months ago. If you're on latest than you should have it.
>>
>
> It won't. All you will manage to do is burn your demodulator, if you happen
> to
> be that lucky one, with that change. At least a few people have burned
> demodulators by now, from what i do see.
>
>
> Regards,
> Manu


Manu, would you be so kind to explain why it will burn the demodulator?
It happens only with 30000 transponders? And only with this card?
Does this mean I can't use my card to see channels on 30000 transponders?

Chris

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Ales Jurik]

On Monday 26 of January 2009, Chris Silva wrote:
> On Mon, Jan 26, 2009 at 5:50 PM, Manu Abraham <abraham.manu@gmail.com> 
wrote:
> > On Mon, Jan 26, 2009 at 8:19 PM, Alex Betis <alex.betis@gmail.com> wrote:
> >>> Latest changes I can see at
> >>> http://mercurial.intuxication.org/hg/s2-liplianin/ were made about 7
> >>> to 10 days ago. Is this correct? If that's correct, then I'm using
> >>> latest Igor drivers. And behavior described above is what I'm getting.
> >>>
> >>> I can't see anything related do high SR channels on Igor repository.
> >>
> >> He did it few months ago. If you're on latest than you should have it.
> >
> > It won't. All you will manage to do is burn your demodulator, if you
> > happen to
> > be that lucky one, with that change. At least a few people have burned
> > demodulators by now, from what i do see.
> >
> >
> > Regards,
> > Manu
>
> Manu, would you be so kind to explain why it will burn the demodulator?
> It happens only with 30000 transponders? And only with this card?
> Does this mean I can't use my card to see channels on 30000 transponders?
>
> Chris

Regarding the documentation the demodulator is designed to run at max. freq. 
99MHz. Some series of demods burn when the freq is set above this value. But 
this value is enough for most of transponders with SR up to 30000.

Some Russian transponders have SR 43500 - so the demod is set a little bit 
above 3x of this value. This could be dangerous.

This patch (or change) doesn't solve the problem with SR of 30000 and FEC 3/4 
or 5/6.

BR,

Ales

Re: [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Manu Abraham]

Ales Jurik wrote:
> On Monday 26 of January 2009, Chris Silva wrote:
>> On Mon, Jan 26, 2009 at 5:50 PM, Manu Abraham <abraham.manu@gmail.com> 
> wrote:
>>> On Mon, Jan 26, 2009 at 8:19 PM, Alex Betis <alex.betis@gmail.com> wrote:
>>>>> Latest changes I can see at
>>>>> http://mercurial.intuxication.org/hg/s2-liplianin/ were made about 7
>>>>> to 10 days ago. Is this correct? If that's correct, then I'm using
>>>>> latest Igor drivers. And behavior described above is what I'm getting.
>>>>>
>>>>> I can't see anything related do high SR channels on Igor repository.
>>>> He did it few months ago. If you're on latest than you should have it.
>>> It won't. All you will manage to do is burn your demodulator, if you
>>> happen to
>>> be that lucky one, with that change. At least a few people have burned
>>> demodulators by now, from what i do see.
>>>
>>>
>>> Regards,
>>> Manu
>> Manu, would you be so kind to explain why it will burn the demodulator?
>> It happens only with 30000 transponders? And only with this card?
>> Does this mean I can't use my card to see channels on 30000 transponders?
>>
>> Chris
> 
> Regarding the documentation the demodulator is designed to run at max. freq. 
> 99MHz. Some series of demods burn when the freq is set above this value. But 
> this value is enough for most of transponders with SR up to 30000.
> 
> Some Russian transponders have SR 43500 - so the demod is set a little bit 
> above 3x of this value. This could be dangerous.
> 
> This patch (or change) doesn't solve the problem with SR of 30000 and FEC 3/4 
> or 5/6.
> 
> BR,
> 
> Ales


True, very much.

Regards,
Manu

Re: [linux-dvb] Re : Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Manu Abraham]

[-- Attachment #1: Type: text/plain, Size: 1630 bytes --]

Manu wrote:
> Le 26.01.2009 13:50:24, Manu Abraham a écrit :
>> On Mon, Jan 26, 2009 at 8:19 PM, Alex Betis <alex.betis@gmail.com>
>> wrote:
>>
>>> Latest changes I can see at
>>>> http://mercurial.intuxication.org/hg/s2-liplianin/ were made about
>> 7
>>>> to 10 days ago. Is this correct? If that's correct, then I'm using
>>>> latest Igor drivers. And behavior described above is what I'm
>> getting.
>>>> I can't see anything related do high SR channels on Igor
>> repository.
>>> He did it few months ago. If you're on latest than you should have
>> it.
>>>
>>
>> It won't. All you will manage to do is burn your demodulator, if you
>> happen
>> to
>> be that lucky one, with that change. At least a few people have 
>> burned
>> demodulators by now, from what i do see.
> 
> Hmm OK, but is there by any chance a fix for those issues somewhere or 
> in the pipe at least? I am willing to test (as I already offered), I 
> can compile the drivers, spread printk or whatever else is needed to 
> get useful reports. Let me know if I can help sort this problem. BTW in 
> my case it is DVB-S2 30000 SR and FEC 5/6.

It was quite not appreciable on my part to provide a fix or reply in
time nor spend much time on it earlier, but that said i was quite
stuck up with some other things.

Can you please pull a copy of the multiproto tree
http://jusst.de/hg/multiproto or the v4l-dvb tree from
http://jusst.de/hg/v4l-dvb

and apply the following patch and comment what your result is ?
Before applying please do check whether you still have the issues.


BTW: lot of patience you have compared to the other users :)

Regards,
Manu


[-- Attachment #2: increase_timeout.patch --]
[-- Type: text/x-patch, Size: 575 bytes --]

--- a/linux/drivers/media/dvb/frontends/stb0899_algo.c  Tue Jan 27 23:29:44 2009 +0400
+++ b/linux/drivers/media/dvb/frontends/stb0899_algo.c  Tue Jan 27 23:48:52 2009 +0400
@@ -1345,6 +1345,10 @@
                FecLockTime     = 20;   /* 20 ms max time to lock FEC, 20Mbs< SYMB <= 25Mbs             */
        }

+       /* give a factor of safety */
+       searchTime *= 3;
+       FecLockTime *= 3;
+
        /* Maintain Stream Merger in reset during acquisition   */
        reg = stb0899_read_reg(state, STB0899_TSTRES);
        STB0899_SETFIELD_VAL(FRESRS, reg, 1);


[-- Attachment #3: Type: text/plain, Size: 228 bytes --]

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Re : Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Alex Betis]

[-- Attachment #1.1: Type: text/plain, Size: 2061 bytes --]

On Tue, Jan 27, 2009 at 9:56 PM, Manu Abraham <abraham.manu@gmail.com>wrote:

>
> > Hmm OK, but is there by any chance a fix for those issues somewhere or
> > in the pipe at least? I am willing to test (as I already offered), I
> > can compile the drivers, spread printk or whatever else is needed to
> > get useful reports. Let me know if I can help sort this problem. BTW in
> > my case it is DVB-S2 30000 SR and FEC 5/6.
>
> It was quite not appreciable on my part to provide a fix or reply in
> time nor spend much time on it earlier, but that said i was quite
> stuck up with some other things.
>
> Can you please pull a copy of the multiproto tree
> http://jusst.de/hg/multiproto or the v4l-dvb tree from
> http://jusst.de/hg/v4l-dvb
>
> and apply the following patch and comment what your result is ?
> Before applying please do check whether you still have the issues.

Manu,
I've tried to increase those timers long ago when played around with my card
(Twinhan 1041) and scan utility.
I must say that I've concentrated mostly on DVB-S channels that wasn't
always locking.
I didn't notice much improvements. The thing that did help was increasing
the resolution of scan zigzags.
I've sent a patch on that ML and people were happy with the results.
The patch went to Igor's repository, don't know were it goes from there.

I believe DVB-S2 lock suffer from the same problem, but in that case the
zigzag is done in the chip and not in the driver.
Since I have no documentation of the chip I was stuck and left it. So if you
have the knowledge or documentation of the chip,
try to go in that direction.

By the way, question to those who have such channels:
Does windows based applications show those channels properly?


>
>
>
> BTW: lot of patience you have compared to the other users :)
>
> Regards,
> Manu
>
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux-media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>

[-- Attachment #1.2: Type: text/html, Size: 3007 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Re : Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Manu Abraham]

[-- Attachment #1: Type: text/plain, Size: 1738 bytes --]

Alex Betis wrote:
> On Tue, Jan 27, 2009 at 9:56 PM, Manu Abraham <abraham.manu@gmail.com>wrote:
> 
>>> Hmm OK, but is there by any chance a fix for those issues somewhere or
>>> in the pipe at least? I am willing to test (as I already offered), I
>>> can compile the drivers, spread printk or whatever else is needed to
>>> get useful reports. Let me know if I can help sort this problem. BTW in
>>> my case it is DVB-S2 30000 SR and FEC 5/6.
>> It was quite not appreciable on my part to provide a fix or reply in
>> time nor spend much time on it earlier, but that said i was quite
>> stuck up with some other things.
>>
>> Can you please pull a copy of the multiproto tree
>> http://jusst.de/hg/multiproto or the v4l-dvb tree from
>> http://jusst.de/hg/v4l-dvb
>>
>> and apply the following patch and comment what your result is ?
>> Before applying please do check whether you still have the issues.
> 
> Manu,
> I've tried to increase those timers long ago when played around with my card
> (Twinhan 1041) and scan utility.
> I must say that I've concentrated mostly on DVB-S channels that wasn't
> always locking.
> I didn't notice much improvements. The thing that did help was increasing
> the resolution of scan zigzags.

With regards to the zig-zag, one bug is fixed in the v4l-dvb tree.
Most likely you haven't tried that change.

> I've sent a patch on that ML and people were happy with the results.

I did look at your patch, but that was completely against the tuning
algorithm.

[..]

> I believe DVB-S2 lock suffer from the same problem, but in that case the
> zigzag is done in the chip and not in the driver.

Along with the patch i sent, does the attached patch help you in
anyway (This works out for DVB-S2 only)?



[-- Attachment #2: fix_iterations.patch --]
[-- Type: text/x-patch, Size: 1240 bytes --]

diff -r a4731ed28cac linux/drivers/media/dvb/frontends/stb0899_drv.c
--- a/linux/drivers/media/dvb/frontends/stb0899_drv.c   Tue Jan 27 23:29:44 2009 +0400
+++ b/linux/drivers/media/dvb/frontends/stb0899_drv.c   Wed Jan 28 01:08:25 2009 +0400
@@ -1461,19 +1461,16 @@
        struct stb0899_config *config = state->config;

        s32 iter_scale;
-       u32 reg;

        iter_scale = 17 * (internal->master_clk / 1000);
        iter_scale += 410000;
-       iter_scale /= (internal->srate / 1000000);
-       iter_scale /= 1000;
+       iter_scale /= (internal->srate / 1000);

        if (iter_scale > config->ldpc_max_iter)
                iter_scale = config->ldpc_max_iter;

-       reg = STB0899_READ_S2REG(STB0899_S2DEMOD, MAX_ITER);
-       STB0899_SETFIELD_VAL(MAX_ITERATIONS, reg, iter_scale);
-       stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_MAX_ITER, STB0899_OFF0_MAX_ITER, reg);
+       stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_MAX_ITER, STB0899_OFF0_MAX_ITER, iter_scale);
+       stb0899_write_s2reg(state, STB0899_S2DEMOD, STB0899_BASE_ITER_SCALE, STB0899_OFF0_ITER_SCALE, iter_scale);
 }

 static enum dvbfe_search stb0899_search(struct dvb_frontend *fe, struct dvb_frontend_parameters *p)

Re: [linux-dvb] Re : Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Alex Betis]

[-- Attachment #1.1: Type: text/plain, Size: 1919 bytes --]

On Tue, Jan 27, 2009 at 11:13 PM, Manu Abraham <abraham.manu@gmail.com>wrote:

> Alex Betis wrote:
>
> > Manu,
> > I've tried to increase those timers long ago when played around with my
> card
> > (Twinhan 1041) and scan utility.
> > I must say that I've concentrated mostly on DVB-S channels that wasn't
> > always locking.
> > I didn't notice much improvements. The thing that did help was increasing
> > the resolution of scan zigzags.
>
> With regards to the zig-zag, one bug is fixed in the v4l-dvb tree.
> Most likely you haven't tried that change.

I use Igor's version, but he merges v4l changes quite often.
Can you point me to a patch or code that was changes? I want to make sure I
have that fix.


>
>
> > I've sent a patch on that ML and people were happy with the results.
>
> I did look at your patch, but that was completely against the tuning
> algorithm.

Well, you know, it works :)
What is the algorithm? I didn't make major changes beside increasing the
zigzag resolution for different scan stages and zigzag around the frequency
that previous stage was able to detect instead of starting from the
beginning. Sounds logical to me.


>
> [..]
>
> > I believe DVB-S2 lock suffer from the same problem, but in that case the
> > zigzag is done in the chip and not in the driver.
>
> Along with the patch i sent, does the attached patch help you in
> anyway (This works out for DVB-S2 only)?

I didn't tried to watch any DVB-S2 channels yet, not sure I have any FTA
with my current directions.
But I'll try that change later for scanning.

BTW, too bad the code has very few comments inside to understand all the
numeric values used for calculations.


>
>
>
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux-media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>

[-- Attachment #1.2: Type: text/html, Size: 3051 bytes --]

[-- Attachment #2: Type: text/plain, Size: 228 bytes --]

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Re : Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Jonas Kvinge]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Manu Abraham wrote:
> Alex Betis wrote:
>> On Tue, Jan 27, 2009 at 9:56 PM, Manu Abraham <abraham.manu@gmail.com>wrote:
>>
>>>> Hmm OK, but is there by any chance a fix for those issues somewhere or
>>>> in the pipe at least? I am willing to test (as I already offered), I
>>>> can compile the drivers, spread printk or whatever else is needed to
>>>> get useful reports. Let me know if I can help sort this problem. BTW in
>>>> my case it is DVB-S2 30000 SR and FEC 5/6.
>>> It was quite not appreciable on my part to provide a fix or reply in
>>> time nor spend much time on it earlier, but that said i was quite
>>> stuck up with some other things.
>>>
>>> Can you please pull a copy of the multiproto tree
>>> http://jusst.de/hg/multiproto or the v4l-dvb tree from
>>> http://jusst.de/hg/v4l-dvb
>>>
>>> and apply the following patch and comment what your result is ?
>>> Before applying please do check whether you still have the issues.
>> Manu,
>> I've tried to increase those timers long ago when played around with my card
>> (Twinhan 1041) and scan utility.
>> I must say that I've concentrated mostly on DVB-S channels that wasn't
>> always locking.
>> I didn't notice much improvements. The thing that did help was increasing
>> the resolution of scan zigzags.
> 
> With regards to the zig-zag, one bug is fixed in the v4l-dvb tree.
> Most likely you haven't tried that change.
> 
>> I've sent a patch on that ML and people were happy with the results.
> 
> I did look at your patch, but that was completely against the tuning
> algorithm.
> 
> [..]
> 
>> I believe DVB-S2 lock suffer from the same problem, but in that case the
>> zigzag is done in the chip and not in the driver.
> 
> Along with the patch i sent, does the attached patch help you in
> anyway (This works out for DVB-S2 only)?
> 
> 
> 

- From what I understand the driver still has some issues. Got feedback
from another guy with Canal Digital in Norway that he has the same
issues as me.

Not sure if the diff was an attempt to fix the digital artefacts but I
tried applying the diff manually on the source I grabbed from
http://jusst.de/hg/v4l-dvb/ but did not notice any improvements or
difference with the artefacts. Would any logs be helpful?

If there is anything else I could try I'm willing to try it out. I
appreciate your effort. Thanks.


Jonas
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.9 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org

iEYEARECAAYFAkmHIuMACgkQpvOo+MDrK1H1wACggFIUgXQHcJxBhjCCGXtDLe44
b7EAn0VW7orjhEdbhyWgQhOITWopLxwg
=dSFB
-----END PGP SIGNATURE-----

Re: [linux-dvb] Re : Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Chris Silva]

On Tue, Jan 27, 2009 at 9:13 PM, Manu Abraham <abraham.manu@gmail.com> wrote:
> Alex Betis wrote:
>> On Tue, Jan 27, 2009 at 9:56 PM, Manu Abraham <abraham.manu@gmail.com>wrote:
>>
>>>> Hmm OK, but is there by any chance a fix for those issues somewhere or
>>>> in the pipe at least? I am willing to test (as I already offered), I
>>>> can compile the drivers, spread printk or whatever else is needed to
>>>> get useful reports. Let me know if I can help sort this problem. BTW in
>>>> my case it is DVB-S2 30000 SR and FEC 5/6.
>>> It was quite not appreciable on my part to provide a fix or reply in
>>> time nor spend much time on it earlier, but that said i was quite
>>> stuck up with some other things.
>>>
>>> Can you please pull a copy of the multiproto tree
>>> http://jusst.de/hg/multiproto or the v4l-dvb tree from
>>> http://jusst.de/hg/v4l-dvb
>>>
>>> and apply the following patch and comment what your result is ?
>>> Before applying please do check whether you still have the issues.
>>
>> Manu,
>> I've tried to increase those timers long ago when played around with my card
>> (Twinhan 1041) and scan utility.
>> I must say that I've concentrated mostly on DVB-S channels that wasn't
>> always locking.
>> I didn't notice much improvements. The thing that did help was increasing
>> the resolution of scan zigzags.
>
> With regards to the zig-zag, one bug is fixed in the v4l-dvb tree.
> Most likely you haven't tried that change.
>
>> I've sent a patch on that ML and people were happy with the results.
>
> I did look at your patch, but that was completely against the tuning
> algorithm.
>
> [..]
>
>> I believe DVB-S2 lock suffer from the same problem, but in that case the
>> zigzag is done in the chip and not in the driver.
>
> Along with the patch i sent, does the attached patch help you in
> anyway (This works out for DVB-S2 only)?
>

Manu,

I've tried both multiproto branches you indicated above, *with* and
*without* the patches you sent to the ML (fix_iterations.patch and
increase timeout.patch) on this thread.
Sadly, same behavior as S2API V4L-DVB current branch. No lock on 30000
3/4 channels. It achieves a 0.5 second jittery sound but no image. It
seems the driver is struggling to correctly lock on that channel, but
doesn't get there in time... Or maybe the hardware... Dunno...

Channels like

ASTRA HD+;BetaDigital:11914:hC910M2O35S1:S19.2E:27500:1279=27:0;1283=deu:0:0:131:133:6:0
PREMIERE HD,PREM
HD;PREMIERE:11914:hC910M2O35S1:S19.2E:27500:767=27:0;771=deu,772=eng:32:1837,1833,1834,9C4:129:133:6:0
DISCOVERY HD,DISC
HD;PREMIERE:11914:hC910M2O35S1:S19.2E:27500:1023=27:0;1027=deu:32:1837,1833,1834,9C4:130:133:6

work just fine.

But channels like

National Geographic HD;National Geographic
HD:11731:vC34M5O25S1:S30.0W:29000:6496=27:6497:0:1802:943:54:47:0
MOV HD;MOV HD:11731:vC34M5O25S1:S30.0W:29000:6512=27:6513=por:0:1802:944:54:47:0
Sport TV - HD;Sport TV -
HD:11731:vC34M5O25S1:S30.0W:29000:6528=27:6529=por:0:1802:945:54:47:0
RTP HD;RTP HD:11731:vC34M5O25S1:S30.0W:29000:6544=27:6545:0:1802:946:54:47:0
TVCine 4 HD;TVCine 4
HD:11731:vC34M5O25S1:S30.0W:29000:6560=27:6561:0:1802:947:54:47:0
Disney Cinemagic
HD:11731:vC34M5O25S1:S30.0W:29000:6576=27:6577=por:0:1802:948:54:47:0
Eurosport HD:11731:vC34M5O25S1:S30.0W:29000:6592=27:6593=por:0:1802:949:54:47:0

or

[0065];:12012:hC34M5S1:S30.0W:30000:4097:4098:4100:100:101:0:0:0
[0066];:12012:hC34M5S1:S30.0W:30000:4105:4106:4100:100:102:0:0:0
[0067];:12012:hC34M5S1:S30.0W:30000:4113:4114:4100:100:103:0:0:0
[0068];:12012:hC34M5S1:S30.0W:30000:4121:4122:4100:100:104:0:0:0
[0069];:12012:hC34M5S1:S30.0W:30000:4129:4130:4100:100:105:0:0:0
[006a];:12012:hC34M5S1:S30.0W:30000:4137:4138:4100:100:106:0:0:0
[006b];:12012:hC34M5S1:S30.0W:30000:4145:4146:4100:100:107:0:0:0

simply don't work.

BTW, I think the channels above that don't work have a 0x0B stream
indication. Satellite operators are misleading on the stream (h.222)
when in fact they are h.264. Read that were on the ML. Don't know if
it affects anything, but hey... I have to try everything! ;)

I'm available to any tests necessary to fix this once and for all, if possible.

Just let me know.

Thanks for all your hard work.

Chris

Re : [linux-dvb] Re : Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Manu]

Le 02.02.2009 18:43:33, Chris Silva a écrit :
> On Tue, Jan 27, 2009 at 9:13 PM, Manu Abraham 
> <abraham.manu@gmail.com>
> wrote:
> > Alex Betis wrote:
> >> On Tue, Jan 27, 2009 at 9:56 PM, Manu Abraham
> <abraham.manu@gmail.com>wrote:
> >>
> >>>> Hmm OK, but is there by any chance a fix for those issues
> somewhere or
> >>>> in the pipe at least? I am willing to test (as I already
> offered), I
> >>>> can compile the drivers, spread printk or whatever else is 
> needed
> to
> >>>> get useful reports. Let me know if I can help sort this problem.
> BTW in
> >>>> my case it is DVB-S2 30000 SR and FEC 5/6.
> >>> It was quite not appreciable on my part to provide a fix or reply
> in
> >>> time nor spend much time on it earlier, but that said i was quite
> >>> stuck up with some other things.
> >>>
> >>> Can you please pull a copy of the multiproto tree
> >>> http://jusst.de/hg/multiproto or the v4l-dvb tree from
> >>> http://jusst.de/hg/v4l-dvb
> >>>
> >>> and apply the following patch and comment what your result is ?
> >>> Before applying please do check whether you still have the 
> issues.
> >>
> >> Manu,
> >> I've tried to increase those timers long ago when played around
> with my card
> >> (Twinhan 1041) and scan utility.
> >> I must say that I've concentrated mostly on DVB-S channels that
> wasn't
> >> always locking.
> >> I didn't notice much improvements. The thing that did help was
> increasing
> >> the resolution of scan zigzags.
> >
> > With regards to the zig-zag, one bug is fixed in the v4l-dvb tree.
> > Most likely you haven't tried that change.
> >
> >> I've sent a patch on that ML and people were happy with the
> results.
> >
> > I did look at your patch, but that was completely against the 
> tuning
> > algorithm.
> >
> > [..]
> >
> >> I believe DVB-S2 lock suffer from the same problem, but in that
> case the
> >> zigzag is done in the chip and not in the driver.
> >
> > Along with the patch i sent, does the attached patch help you in
> > anyway (This works out for DVB-S2 only)?
> >
> 
> Manu,
> 
> I've tried both multiproto branches you indicated above, *with* and
> *without* the patches you sent to the ML (fix_iterations.patch and
> increase timeout.patch) on this thread.
> Sadly, same behavior as S2API V4L-DVB current branch. No lock on 
> 30000
> 3/4 channels. It achieves a 0.5 second jittery sound but no image. It
> seems the driver is struggling to correctly lock on that channel, but
> doesn't get there in time... Or maybe the hardware... Dunno...
> 
> Channels like
> 
> ASTRA HD
> +;BetaDigital:11914:hC910M2O35S1:S19.2E:27500:1279=27:0;1283=deu:0:0:131:133:6:0
> PREMIERE HD,PREM
> HD;PREMIERE:11914:hC910M2O35S1:S19.2E:27500:767=27:0;771=deu,772=eng:32:1837,1833,1834,9C4:129:133:6:0
> DISCOVERY HD,DISC
> HD;PREMIERE:11914:hC910M2O35S1:S19.2E:27500:1023=27:0;1027=deu:32:1837,1833,1834,9C4:130:133:6
> 
> work just fine.
> 
> But channels like
> 
> National Geographic HD;National Geographic
> HD:11731:vC34M5O25S1:S30.0W:29000:6496=27:6497:0:1802:943:54:47:0
> MOV HD;MOV 
> HD:11731:vC34M5O25S1:S30.0W:29000:6512=27:6513=por:0:1802:944:54:47:0
> Sport TV - HD;Sport TV -
> HD:11731:vC34M5O25S1:S30.0W:29000:6528=27:6529=por:0:1802:945:54:47:0
> RTP HD;RTP 
> HD:11731:vC34M5O25S1:S30.0W:29000:6544=27:6545:0:1802:946:54:47:0
> TVCine 4 HD;TVCine 4
> HD:11731:vC34M5O25S1:S30.0W:29000:6560=27:6561:0:1802:947:54:47:0
> Disney Cinemagic
> HD:11731:vC34M5O25S1:S30.0W:29000:6576=27:6577=por:0:1802:948:54:47:0
> Eurosport 
> HD:11731:vC34M5O25S1:S30.0W:29000:6592=27:6593=por:0:1802:949:54:47:0
> 
> or
> 
> [0065];:12012:hC34M5S1:S30.0W:30000:4097:4098:4100:100:101:0:0:0
> [0066];:12012:hC34M5S1:S30.0W:30000:4105:4106:4100:100:102:0:0:0
> [0067];:12012:hC34M5S1:S30.0W:30000:4113:4114:4100:100:103:0:0:0
> [0068];:12012:hC34M5S1:S30.0W:30000:4121:4122:4100:100:104:0:0:0
> [0069];:12012:hC34M5S1:S30.0W:30000:4129:4130:4100:100:105:0:0:0
> [006a];:12012:hC34M5S1:S30.0W:30000:4137:4138:4100:100:106:0:0:0
> [006b];:12012:hC34M5S1:S30.0W:30000:4145:4146:4100:100:107:0:0:0
> 
> simply don't work.
> 
> BTW, I think the channels above that don't work have a 0x0B stream
> indication. Satellite operators are misleading on the stream (h.222)
> when in fact they are h.264. Read that were on the ML. Don't know if
> it affects anything, but hey... I have to try everything! ;)
> 
> I'm available to any tests necessary to fix this once and for all, if
> possible.

Could I suggest something (probably stupid): I think that the TT 3650 
is the same card but using USB, right (I mean it uses the stb0899/
stb6100 chips also)? So if someone could sniff the usb transactions 
during a successfull lock on a problematic channel (using windows 
then), we could see what is different.
I do not have neither Windows, neither this card, but a good soul could 
help us here.
Manu, is that sensible?
Bye
Manu (the other one ;-)

Re : [linux-dvb] Re : Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Manu]

Le 02.02.2009 18:43:33, Chris Silva a écrit :
> On Tue, Jan 27, 2009 at 9:13 PM, Manu Abraham 
> <abraham.manu@gmail.com>
> wrote:
> > Alex Betis wrote:
> >> On Tue, Jan 27, 2009 at 9:56 PM, Manu Abraham
> <abraham.manu@gmail.com>wrote:
> >>
> >>>> Hmm OK, but is there by any chance a fix for those issues
> somewhere or
> >>>> in the pipe at least? I am willing to test (as I already
> offered), I
> >>>> can compile the drivers, spread printk or whatever else is 
> needed
> to
> >>>> get useful reports. Let me know if I can help sort this problem.
> BTW in
> >>>> my case it is DVB-S2 30000 SR and FEC 5/6.
> >>> It was quite not appreciable on my part to provide a fix or reply
> in
> >>> time nor spend much time on it earlier, but that said i was quite
> >>> stuck up with some other things.
> >>>
> >>> Can you please pull a copy of the multiproto tree
> >>> http://jusst.de/hg/multiproto or the v4l-dvb tree from
> >>> http://jusst.de/hg/v4l-dvb
> >>>
> >>> and apply the following patch and comment what your result is ?
> >>> Before applying please do check whether you still have the 
> issues.
> >>
> >> Manu,
> >> I've tried to increase those timers long ago when played around
> with my card
> >> (Twinhan 1041) and scan utility.
> >> I must say that I've concentrated mostly on DVB-S channels that
> wasn't
> >> always locking.
> >> I didn't notice much improvements. The thing that did help was
> increasing
> >> the resolution of scan zigzags.
> >
> > With regards to the zig-zag, one bug is fixed in the v4l-dvb tree.
> > Most likely you haven't tried that change.
> >
> >> I've sent a patch on that ML and people were happy with the
> results.
> >
> > I did look at your patch, but that was completely against the 
> tuning
> > algorithm.
> >
> > [..]
> >
> >> I believe DVB-S2 lock suffer from the same problem, but in that
> case the
> >> zigzag is done in the chip and not in the driver.
> >
> > Along with the patch i sent, does the attached patch help you in
> > anyway (This works out for DVB-S2 only)?
> >
> 
> Manu,
> 
> I've tried both multiproto branches you indicated above, *with* and
> *without* the patches you sent to the ML (fix_iterations.patch and
> increase timeout.patch) on this thread.
> Sadly, same behavior as S2API V4L-DVB current branch. No lock on 
> 30000
> 3/4 channels. It achieves a 0.5 second jittery sound but no image. It
> seems the driver is struggling to correctly lock on that channel, but
> doesn't get there in time... Or maybe the hardware... Dunno...
> 
> Channels like
> 
> ASTRA HD
> +;BetaDigital:11914:hC910M2O35S1:S19.2E:27500:1279=27:0;1283=deu:0:0:131:133:6:0
> PREMIERE HD,PREM
> HD;PREMIERE:11914:hC910M2O35S1:S19.2E:27500:767=27:0;771=deu,772=eng:32:1837,1833,1834,9C4:129:133:6:0
> DISCOVERY HD,DISC
> HD;PREMIERE:11914:hC910M2O35S1:S19.2E:27500:1023=27:0;1027=deu:32:1837,1833,1834,9C4:130:133:6
> 
> work just fine.
> 
> But channels like
> 
> National Geographic HD;National Geographic
> HD:11731:vC34M5O25S1:S30.0W:29000:6496=27:6497:0:1802:943:54:47:0
> MOV HD;MOV 
> HD:11731:vC34M5O25S1:S30.0W:29000:6512=27:6513=por:0:1802:944:54:47:0
> Sport TV - HD;Sport TV -
> HD:11731:vC34M5O25S1:S30.0W:29000:6528=27:6529=por:0:1802:945:54:47:0
> RTP HD;RTP 
> HD:11731:vC34M5O25S1:S30.0W:29000:6544=27:6545:0:1802:946:54:47:0
> TVCine 4 HD;TVCine 4
> HD:11731:vC34M5O25S1:S30.0W:29000:6560=27:6561:0:1802:947:54:47:0
> Disney Cinemagic
> HD:11731:vC34M5O25S1:S30.0W:29000:6576=27:6577=por:0:1802:948:54:47:0
> Eurosport 
> HD:11731:vC34M5O25S1:S30.0W:29000:6592=27:6593=por:0:1802:949:54:47:0
> 
> or
> 
> [0065];:12012:hC34M5S1:S30.0W:30000:4097:4098:4100:100:101:0:0:0
> [0066];:12012:hC34M5S1:S30.0W:30000:4105:4106:4100:100:102:0:0:0
> [0067];:12012:hC34M5S1:S30.0W:30000:4113:4114:4100:100:103:0:0:0
> [0068];:12012:hC34M5S1:S30.0W:30000:4121:4122:4100:100:104:0:0:0
> [0069];:12012:hC34M5S1:S30.0W:30000:4129:4130:4100:100:105:0:0:0
> [006a];:12012:hC34M5S1:S30.0W:30000:4137:4138:4100:100:106:0:0:0
> [006b];:12012:hC34M5S1:S30.0W:30000:4145:4146:4100:100:107:0:0:0
> 
> simply don't work.
> 
> BTW, I think the channels above that don't work have a 0x0B stream
> indication. Satellite operators are misleading on the stream (h.222)
> when in fact they are h.264. Read that were on the ML. Don't know if
> it affects anything, but hey... I have to try everything! ;)
> 
> I'm available to any tests necessary to fix this once and for all, if
> possible.

Could I suggest something (probably stupid): I think that the TT 3650 
is the same card but using USB, right (I mean it uses the stb0899/
stb6100 chips also)? So if someone could sniff the usb transactions 
during a successfull lock on a problematic channel (using windows 
then), we could see what is different.
I do not have neither Windows, neither this card, but a good soul could 
help us here.
Manu, is that sensible?
Bye
Manu (the other one ;-)

Re: Re : [linux-dvb] Re : Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Manu Abraham]

Manu wrote:
> Le 02.02.2009 18:43:33, Chris Silva a écrit :
>> On Tue, Jan 27, 2009 at 9:13 PM, Manu Abraham 
>> <abraham.manu@gmail.com>
>> wrote:
>>> Alex Betis wrote:
>>>> On Tue, Jan 27, 2009 at 9:56 PM, Manu Abraham
>> <abraham.manu@gmail.com>wrote:
>>>>>> Hmm OK, but is there by any chance a fix for those issues
>> somewhere or
>>>>>> in the pipe at least? I am willing to test (as I already
>> offered), I
>>>>>> can compile the drivers, spread printk or whatever else is 
>> needed
>> to
>>>>>> get useful reports. Let me know if I can help sort this problem.
>> BTW in
>>>>>> my case it is DVB-S2 30000 SR and FEC 5/6.
>>>>> It was quite not appreciable on my part to provide a fix or reply
>> in
>>>>> time nor spend much time on it earlier, but that said i was quite
>>>>> stuck up with some other things.
>>>>>
>>>>> Can you please pull a copy of the multiproto tree
>>>>> http://jusst.de/hg/multiproto or the v4l-dvb tree from
>>>>> http://jusst.de/hg/v4l-dvb
>>>>>
>>>>> and apply the following patch and comment what your result is ?
>>>>> Before applying please do check whether you still have the 
>> issues.
>>>> Manu,
>>>> I've tried to increase those timers long ago when played around
>> with my card
>>>> (Twinhan 1041) and scan utility.
>>>> I must say that I've concentrated mostly on DVB-S channels that
>> wasn't
>>>> always locking.
>>>> I didn't notice much improvements. The thing that did help was
>> increasing
>>>> the resolution of scan zigzags.
>>> With regards to the zig-zag, one bug is fixed in the v4l-dvb tree.
>>> Most likely you haven't tried that change.
>>>
>>>> I've sent a patch on that ML and people were happy with the
>> results.
>>> I did look at your patch, but that was completely against the 
>> tuning
>>> algorithm.
>>>
>>> [..]
>>>
>>>> I believe DVB-S2 lock suffer from the same problem, but in that
>> case the
>>>> zigzag is done in the chip and not in the driver.
>>> Along with the patch i sent, does the attached patch help you in
>>> anyway (This works out for DVB-S2 only)?
>>>
>> Manu,
>>
>> I've tried both multiproto branches you indicated above, *with* and
>> *without* the patches you sent to the ML (fix_iterations.patch and
>> increase timeout.patch) on this thread.
>> Sadly, same behavior as S2API V4L-DVB current branch. No lock on 
>> 30000
>> 3/4 channels. It achieves a 0.5 second jittery sound but no image. It
>> seems the driver is struggling to correctly lock on that channel, but
>> doesn't get there in time... Or maybe the hardware... Dunno...

Can you please send me a complete trace with the stb6100 and stb0899
modules loaded with verbose=5 for the 30MSPS transponder what you
are trying ? One simple szap would be enough (no scan please) based
on the http://jusst.de/hg/v4l-dvb tree.

Before you start testing, start clean from a cold boot after a
powerdown. This makes it a bit more easier identify things.

Regards,
Manu

Re : Re : [linux-dvb] Re : Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Manu]

[-- Attachment #1: Type: text/plain, Size: 3593 bytes --]

Le 05.02.2009 19:50:18, Manu Abraham a écrit :
> Manu wrote:
> > Le 02.02.2009 18:43:33, Chris Silva a écrit :
> >> On Tue, Jan 27, 2009 at 9:13 PM, Manu Abraham 
> >> <abraham.manu@gmail.com>
> >> wrote:
> >>> Alex Betis wrote:
> >>>> On Tue, Jan 27, 2009 at 9:56 PM, Manu Abraham
> >> <abraham.manu@gmail.com>wrote:
> >>>>>> Hmm OK, but is there by any chance a fix for those issues
> >> somewhere or
> >>>>>> in the pipe at least? I am willing to test (as I already
> >> offered), I
> >>>>>> can compile the drivers, spread printk or whatever else is 
> >> needed
> >> to
> >>>>>> get useful reports. Let me know if I can help sort this
> problem.
> >> BTW in
> >>>>>> my case it is DVB-S2 30000 SR and FEC 5/6.
> >>>>> It was quite not appreciable on my part to provide a fix or
> reply
> >> in
> >>>>> time nor spend much time on it earlier, but that said i was
> quite
> >>>>> stuck up with some other things.
> >>>>>
> >>>>> Can you please pull a copy of the multiproto tree
> >>>>> http://jusst.de/hg/multiproto or the v4l-dvb tree from
> >>>>> http://jusst.de/hg/v4l-dvb
> >>>>>
> >>>>> and apply the following patch and comment what your result is ?
> >>>>> Before applying please do check whether you still have the 
> >> issues.
> >>>> Manu,
> >>>> I've tried to increase those timers long ago when played around
> >> with my card
> >>>> (Twinhan 1041) and scan utility.
> >>>> I must say that I've concentrated mostly on DVB-S channels that
> >> wasn't
> >>>> always locking.
> >>>> I didn't notice much improvements. The thing that did help was
> >> increasing
> >>>> the resolution of scan zigzags.
> >>> With regards to the zig-zag, one bug is fixed in the v4l-dvb 
> tree.
> >>> Most likely you haven't tried that change.
> >>>
> >>>> I've sent a patch on that ML and people were happy with the
> >> results.
> >>> I did look at your patch, but that was completely against the 
> >> tuning
> >>> algorithm.
> >>>
> >>> [..]
> >>>
> >>>> I believe DVB-S2 lock suffer from the same problem, but in that
> >> case the
> >>>> zigzag is done in the chip and not in the driver.
> >>> Along with the patch i sent, does the attached patch help you in
> >>> anyway (This works out for DVB-S2 only)?
> >>>
> >> Manu,
> >>
> >> I've tried both multiproto branches you indicated above, *with* 
> and
> >> *without* the patches you sent to the ML (fix_iterations.patch and
> >> increase timeout.patch) on this thread.
> >> Sadly, same behavior as S2API V4L-DVB current branch. No lock on 
> >> 30000
> >> 3/4 channels. It achieves a 0.5 second jittery sound but no image.
> It
> >> seems the driver is struggling to correctly lock on that channel,
> but
> >> doesn't get there in time... Or maybe the hardware... Dunno...
> 
> Can you please send me a complete trace with the stb6100 and stb0899
> modules loaded with verbose=5 for the 30MSPS transponder what you
> are trying ? One simple szap would be enough (no scan please) based
> on the http://jusst.de/hg/v4l-dvb tree.
> 
> Before you start testing, start clean from a cold boot after a
> powerdown. This makes it a bit more easier identify things.

OK I did just that with latest multiproto on a 11495 MHz trnaposnder, 
DVB-S2, 30MS/s, FEC 5/6 which works using the provider's STB . I put 
the log in attachement. You will observe a lock is acquired really 
briefly and then nothing. Obtained using:
szap2 -t 2
I hope this can give you some data. Let me know if you need more info 
(like putting some more printksin the source).
Bye
Manu

[-- Attachment #2: szap-dvbs2-nolock.txt.bz2 --]
[-- Type: application/x-bzip, Size: 9856 bytes --]

Re : [linux-dvb] Re : Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Chris Silva]

[-- Attachment #1: Type: text/plain, Size: 2718 bytes --]

On Fri, Feb 6, 2009 at 3:22 PM, Manu <eallaud@gmail.com> wrote:
>> Can you please send me a complete trace with the stb6100 and stb0899
>> modules loaded with verbose=5 for the 30MSPS transponder what you
>> are trying ? One simple szap would be enough (no scan please) based
>> on the http://jusst.de/hg/v4l-dvb tree.
>>
>> Before you start testing, start clean from a cold boot after a
>> powerdown. This makes it a bit more easier identify things.
>
> OK I did just that with latest multiproto on a 11495 MHz trnaposnder,
> DVB-S2, 30MS/s, FEC 5/6 which works using the provider's STB . I put
> the log in attachement. You will observe a lock is acquired really
> briefly and then nothing. Obtained using:
> szap2 -t 2
> I hope this can give you some data. Let me know if you need more info
> (like putting some more printksin the source).
> Bye
> Manu
>

Sorry for the late reply, but the new list confuses the hell out of me
and I missed this message, somehow...

Attached is a log file with the results of dvb-apps/szap on a 30000
3/4 channel using a http://jusst.de/hg/v4l-dvb clean compile and cold
boot as recommended.

Also loaded stb6100 and stb0899 with verbose=5

Command line used and result:

root@vdr:/usr/local/src/v4l-dvb_multi/dvb-apps/util/szap# ./szap -c
/video/channels.conf -n 7
reading channels from file '/video/channels.conf'
zapping to 7 '[006b]':
sat 0, frequency = 12012 MHz H, symbolrate 30000000, vpid = 0x1031,
apid = 0x1032 sid = 0x1004
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 00 | signal 7fb2 | snr 0000 | ber 00000000 | unc fffffffe |
status 00 | signal 7fb2 | snr 0000 | ber 00000000 | unc fffffffe |
[...]
status 00 | signal 7fb2 | snr 0000 | ber 00000000 | unc fffffffe |
status 00 | signal 7fb2 | snr 0000 | ber 00000000 | unc fffffffe |

After that szapping to that problematic channel, I tried a DVB-S
channel, which locks without problems.

root@vdr:/usr/local/src/v4l-dvb_multi/dvb-apps/util/szap# ./szap -c
/video/channels.conf -H -n 33
reading channels from file '/video/channels.conf'
zapping to 33 'FOX':
sat 0, frequency = 11617 MHz V, symbolrate 27500000, vpid = 0x1b30,
apid = 0x1b31 sid = 0x0000
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 00 | signal  49% | snr   0% | ber 0 | unc -2 |
status 1e | signal   0% | snr   0% | ber 0 | unc -2 | FE_HAS_LOCK

Going to test your the same multiproto tree _with_ both patches you
mentioned early on this thread.

BTW, I can see all those channels just fine using a DM800 and the
provider original decoder with my subscription card.

I'm positive that dish/lnb/connections aren't the problem.

Thanks for taking the time to address this particular issue.

Chris

[-- Attachment #2: v4l-dvb-multiproto_s2-3200_no_patch_test_log.txt.tar.bz2 --]
[-- Type: application/x-bzip2, Size: 25506 bytes --]

Re : [linux-dvb] Re : Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Chris Silva]

[-- Attachment #1: Type: text/plain, Size: 3076 bytes --]

On Sat, Feb 14, 2009 at 10:34 PM, Chris Silva <2manybills@gmail.com> wrote:
> On Fri, Feb 6, 2009 at 3:22 PM, Manu <eallaud@gmail.com> wrote:
>>> Can you please send me a complete trace with the stb6100 and stb0899
>>> modules loaded with verbose=5 for the 30MSPS transponder what you
>>> are trying ? One simple szap would be enough (no scan please) based
>>> on the http://jusst.de/hg/v4l-dvb tree.
>>>
>>> Before you start testing, start clean from a cold boot after a
>>> powerdown. This makes it a bit more easier identify things.
>>
>> OK I did just that with latest multiproto on a 11495 MHz trnaposnder,
>> DVB-S2, 30MS/s, FEC 5/6 which works using the provider's STB . I put
>> the log in attachement. You will observe a lock is acquired really
>> briefly and then nothing. Obtained using:
>> szap2 -t 2
>> I hope this can give you some data. Let me know if you need more info
>> (like putting some more printksin the source).
>> Bye
>> Manu
>>
>
> Sorry for the late reply, but the new list confuses the hell out of me
> and I missed this message, somehow...
>
> Attached is a log file with the results of dvb-apps/szap on a 30000
> 3/4 channel using a http://jusst.de/hg/v4l-dvb clean compile and cold
> boot as recommended.
>
> Also loaded stb6100 and stb0899 with verbose=5
>
> Command line used and result:
>
> root@vdr:/usr/local/src/v4l-dvb_multi/dvb-apps/util/szap# ./szap -c
> /video/channels.conf -n 7
> reading channels from file '/video/channels.conf'
> zapping to 7 '[006b]':
> sat 0, frequency = 12012 MHz H, symbolrate 30000000, vpid = 0x1031,
> apid = 0x1032 sid = 0x1004
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> status 00 | signal 7fb2 | snr 0000 | ber 00000000 | unc fffffffe |
> status 00 | signal 7fb2 | snr 0000 | ber 00000000 | unc fffffffe |
> [...]
> status 00 | signal 7fb2 | snr 0000 | ber 00000000 | unc fffffffe |
> status 00 | signal 7fb2 | snr 0000 | ber 00000000 | unc fffffffe |
>
> After that szapping to that problematic channel, I tried a DVB-S
> channel, which locks without problems.
>
> root@vdr:/usr/local/src/v4l-dvb_multi/dvb-apps/util/szap# ./szap -c
> /video/channels.conf -H -n 33
> reading channels from file '/video/channels.conf'
> zapping to 33 'FOX':
> sat 0, frequency = 11617 MHz V, symbolrate 27500000, vpid = 0x1b30,
> apid = 0x1b31 sid = 0x0000
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> status 00 | signal  49% | snr   0% | ber 0 | unc -2 |
> status 1e | signal   0% | snr   0% | ber 0 | unc -2 | FE_HAS_LOCK
>
> Going to test your the same multiproto tree _with_ both patches you
> mentioned early on this thread.
>
> BTW, I can see all those channels just fine using a DM800 and the
> provider original decoder with my subscription card.
>
> I'm positive that dish/lnb/connections aren't the problem.
>
> Thanks for taking the time to address this particular issue.
>
> Chris
>

As promised, a log with the exact same conditions described above, but
with increase_timeout.patch and fix_iterations.patch applied, referred
to on this same thread.

Chris

[-- Attachment #2: v4l-dvb-multiproto_s2-3200_with_patches_test_log.txt.tar.bz2 --]
[-- Type: application/x-bzip2, Size: 26102 bytes --]

[linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HD channels

[Jonas Kvinge]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

I got a Technotrend Budget S2-3200 card and is using Canal Digital in
Norway. Channels are found on;
http://www.telenorsbc.com/templates/Page.aspx?id=399

It seems that I got all the DVB-S channels working fine.

Nat Geo HD and Histoy Channel HD are the only two HD channels I can
lock, and I have problems with digital artefacts, lines across the
screen missing data and tons of errors from the frontend. See below for
error log.

MythTV does not find Discovery HD at all while some other HD channels
only get partial lock.

I'm using kernel 2.6.28 with
http://mercurial.intuxication.org/hg/s2-liplianin

mythtv from http://svn.mythtv.org/svn/trunk/ with all the patches from
http://svn.mythtv.org/trac/ticket/5882

I've also tested http://linuxtv.org/hg/v4l-dvb with the same results.


2008-12-31 05:19:40.009 mythfrontend version: trunk [19415M] www.mythtv.org
2008-12-31 05:19:40.010 Using runtime prefix = /usr/local
2008-12-31 05:19:40.821 DBHostName is not set in mysql.txt
2008-12-31 05:19:40.822 Assuming localhost
2008-12-31 05:19:40.822 Empty LocalHostName.
2008-12-31 05:19:40.822 Using localhost value of mediastation
2008-12-31 05:19:40.826 New DB connection, total: 1
2008-12-31 05:19:40.829 Connected to database 'mythconverg' at host:
localhost
2008-12-31 05:19:40.829 Closing DB connection named 'DBManager0'
2008-12-31 05:19:40.864 DPMS is active.
2008-12-31 05:19:40.865 Primary screen: 0.
2008-12-31 05:19:40.865 Connected to database 'mythconverg' at host:
localhost
2008-12-31 05:19:40.866 Using screen 0, 1920x1080 at 0,0
2008-12-31 05:19:40.900 MythUI Image Cache size set to 20971520 bytes
2008-12-31 05:19:40.901 Enabled verbose msgs:  important general
2008-12-31 05:19:41.314 Primary screen: 0.
2008-12-31 05:19:41.315 Using screen 0, 1920x1080 at 0,0
2008-12-31 05:19:41.315 Switching to square mode (G.A.N.T)
2008-12-31 05:19:41.319 Using the Qt painter
mythtv: could not connect to socket
mythtv: No such file or directory
2008-12-31 05:19:41.319 lirc_init failed for mythtv, see preceding messages
2008-12-31 05:19:41.548 Loading from:
/usr/local/share/mythtv/themes/G.A.N.T/base.xml
2008-12-31 05:19:41.798 Loading from:
/usr/local/share/mythtv/themes/default/base.xml
2008-12-31 05:19:41.830 Current Schema Version: 1226
2008-12-31 05:19:41.833 Connecting to backend server: 127.0.0.1:6543
(try 1 of 5)
2008-12-31 05:19:41.834 Using protocol version 42
2008-12-31 05:19:41.912 Registering Internal as a media playback plugin.
2008-12-31 05:19:41.959 MonitorRegisterExtensions(0x100, gif,jpg,png)
2008-12-31 05:19:43.494 Failed to run 'cdrecord --scanbus' error code: 2
QProcess: Destroyed while process is still running.
2008-12-31 05:19:43.530 MonitorRegisterExtensions(0x40, ogg,mp3,aac,flac)
2008-12-31 05:19:43.565 SIP listening on IP Address 192.168.1.22:5060
NAT address 192.168.1.22
2008-12-31 05:19:43.567 SIP: Cannot register; proxy, username or
password not set
2008-12-31 05:19:44.765 Loading from:
/usr/local/share/mythtv/themes/G.A.N.T/menu-ui.xml
2008-12-31 05:19:44.770 Found mainmenu.xml for theme 'G.A.N.T'
2008-12-31 05:19:57.503 New DB connection, total: 2
2008-12-31 05:19:57.504 Connected to database 'mythconverg' at host:
localhost
2008-12-31 05:19:57.619 TV: Attempting to change from None to WatchingLiveTV
2008-12-31 05:19:57.620 Using protocol version 42
2008-12-31 05:19:59.996 NVP: Disabling Audio, params(-1,2,44100)
2008-12-31 05:20:00.065 VideoOutputXv: XVideo Adaptor Name: 'NV17 Video
Texture'
2008-12-31 05:20:00.087 OSD Theme Dimensions W: 640 H: 480
2008-12-31 05:20:00.262 TV: Changing from None to WatchingLiveTV
2008-12-31 05:20:00.262 New DB connection, total: 3
2008-12-31 05:20:00.263 New DB connection, total: 4
2008-12-31 05:20:00.263 Connected to database 'mythconverg' at host:
localhost
2008-12-31 05:20:00.264 Realtime priority would require SUID as root.
2008-12-31 05:20:00.264 Connected to database 'mythconverg' at host:
localhost
2008-12-31 05:20:00.365 Video timing method: USleep with busy wait
2008-12-31 05:20:00.367 DPMS Deactivated
2008-12-31 05:20:05.535 NVP: Prebuffer wait timed out 10 times.
2008-12-31 05:20:06.913 VideoOutputXv Error: XvMC output requested, but
is not supported by display.
Xlib:  extension "XVideo-MotionCompensation" missing on display ":0.0".
Xlib:  extension "XVideo-MotionCompensation" missing on display ":0.0".
XvMCWrapper: Could not open config file "/etc/X11/XvMCConfig".
XvMCWrapper: No such file or directory
2008-12-31 05:20:06.918 VideoOutputXv: Desired video renderer
'xvmc-blit' not available.
                        codec 'H.264' makes 'opengl,xv-blit,xshm,xlib,'
available, using 'opengl' instead.
2008-12-31 05:20:07.223 AFD: Opened codec 0x7fae3404d970, id(H264)
type(Video)
2008-12-31 05:20:07.223 AFD: codec MP3 has 2 channels
2008-12-31 05:20:07.223 AFD: Opened codec 0x7fae36f573c0, id(MP3)
type(Audio)
2008-12-31 05:20:07.223 AFD: Opened codec 0x7fae34090930,
id(DVB_SUBTITLE) type(Subtitle)
2008-12-31 05:20:07.223 AFD: Opened codec 0x7fae34054710,
id(DVB_SUBTITLE) type(Subtitle)
2008-12-31 05:20:07.223 AFD: Opened codec 0x7fae37e954b0,
id(DVB_SUBTITLE) type(Subtitle)
2008-12-31 05:20:07.275 Opening audio device 'default'. ch 2(2) sr 48000
2008-12-31 05:20:07.275 Opening ALSA audio device 'default'.
ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL /dev/mixer
2008-12-31 05:20:07.322 AudioOutput Warning: Mixer attach error -2: No
such file or directory
                        Check Mixer Name in Setup: '/dev/mixer'
2008-12-31 05:20:07.322 NVP: Enabling Audio
2008-12-31 05:20:07.398 [h264 @ 0x7fae468ba3e0]B picture before any
references, skipping
2008-12-31 05:20:07.398 [h264 @ 0x7fae468ba3e0]decode_slice_header error
2008-12-31 05:20:07.398 [h264 @ 0x7fae468ba3e0]B picture before any
references, skipping
2008-12-31 05:20:07.398 [h264 @ 0x7fae468ba3e0]decode_slice_header error
2008-12-31 05:20:07.398 [h264 @ 0x7fae468ba3e0]B picture before any
references, skipping
2008-12-31 05:20:07.398 [h264 @ 0x7fae468ba3e0]decode_slice_header error
2008-12-31 05:20:07.398 [h264 @ 0x7fae468ba3e0]B picture before any
references, skipping
2008-12-31 05:20:07.398 [h264 @ 0x7fae468ba3e0]decode_slice_header error
2008-12-31 05:20:07.398 [h264 @ 0x7fae468ba3e0]B picture before any
references, skipping
2008-12-31 05:20:07.399 [h264 @ 0x7fae468ba3e0]decode_slice_header error
2008-12-31 05:20:07.399 [h264 @ 0x7fae468ba3e0]B picture before any
references, skipping
2008-12-31 05:20:07.399 [h264 @ 0x7fae468ba3e0]decode_slice_header error
2008-12-31 05:20:07.399 [h264 @ 0x7fae468ba3e0]no frame!
2008-12-31 05:20:07.399 AFD Error: Unknown decoding error
2008-12-31 05:20:07.737 NVP: Prebuffer wait timed out 10 times.
2008-12-31 05:20:08.536 [h264 @ 0x7fae468ba3e0]left block unavailable
for requested intra mode at 0 66
2008-12-31 05:20:08.536 [h264 @ 0x7fae468ba3e0]error while decoding MB 0
66, bytestream (404)
2008-12-31 05:20:08.655 [h264 @ 0x7fae468ba3e0]left block unavailable
for requested intra mode at 0 61
2008-12-31 05:20:08.655 [h264 @ 0x7fae468ba3e0]error while decoding MB 0
61, bytestream (14323)
2008-12-31 05:20:08.702 [h264 @ 0x7fae468ba3e0]error while decoding MB
116 42, bytestream (-9)
2008-12-31 05:20:09.351 [h264 @ 0x7fae468ba3e0]error while decoding MB
47 22, bytestream (-5)
2008-12-31 05:20:09.507 [h264 @ 0x7fae468ba3e0]left block unavailable
for requested intra mode at 0 27
2008-12-31 05:20:09.508 [h264 @ 0x7fae468ba3e0]error while decoding MB 0
27, bytestream (15764)
2008-12-31 05:20:09.516 [h264 @ 0x7fae468ba3e0]left block unavailable
for requested intra mode at 0 49
2008-12-31 05:20:09.516 [h264 @ 0x7fae468ba3e0]error while decoding MB 0
49, bytestream (16402)
2008-12-31 05:20:10.138 [dvbsub @ 0x7fae468ba3e0]Invalid y position!
2008-12-31 05:20:10.524 [dvbsub @ 0x7fae468ba3e0]Invalid y position!
2008-12-31 05:20:11.918 [h264 @ 0x7fae468ba3e0]error while decoding MB
111 43, bytestream (-4)
2008-12-31 05:20:14.965 [dvbsub @ 0x7fae468ba3e0]Invalid y position!
2008-12-31 05:20:15.326 [h264 @ 0x7fae468ba3e0]left block unavailable
for requested intra mode at 0 37
2008-12-31 05:20:15.326 [h264 @ 0x7fae468ba3e0]error while decoding MB 0
37, bytestream (21988)
2008-12-31 05:20:15.523 [dvbsub @ 0x7fae468ba3e0]Invalid y position!
2008-12-31 05:20:15.877 [h264 @ 0x7fae468ba3e0]error while decoding MB
23 56, bytestream (-5)
2008-12-31 05:20:15.905 [h264 @ 0x7fae468ba3e0]top block unavailable for
requested intra mode at 76 22
2008-12-31 05:20:15.905 [h264 @ 0x7fae468ba3e0]error while decoding MB
76 22, bytestream (19358)
2008-12-31 05:20:16.752 [h264 @ 0x7fae468ba3e0]top block unavailable for
requested intra mode at 32 22
2008-12-31 05:20:16.752 [h264 @ 0x7fae468ba3e0]error while decoding MB
32 22, bytestream (49962)
2008-12-31 05:20:18.181 [h264 @ 0x7fae468ba3e0]left block unavailable
for requested intra mode at 0 8
2008-12-31 05:20:18.181 [h264 @ 0x7fae468ba3e0]error while decoding MB 0
8, bytestream (10032)
2008-12-31 05:20:20.276 [dvbsub @ 0x7fae468ba3e0]Invalid y position!
2008-12-31 05:20:20.620 [dvbsub @ 0x7fae468ba3e0]Invalid y position!
2008-12-31 05:20:20.829 [h264 @ 0x7fae468ba3e0]top block unavailable for
requested intra4x4 mode -1 at 38 34
2008-12-31 05:20:20.830 [h264 @ 0x7fae468ba3e0]error while decoding MB
38 34, bytestream (18440)
2008-12-31 05:20:23.482 [h264 @ 0x7fae468ba3e0]left block unavailable
for requested intra mode at 0 39
2008-12-31 05:20:23.482 [h264 @ 0x7fae468ba3e0]error while decoding MB 0
39, bytestream (25890)
2008-12-31 05:20:24.299 [h264 @ 0x7fae468ba3e0]cabac decode of qscale
diff failed at 61 18
2008-12-31 05:20:24.299 [h264 @ 0x7fae468ba3e0]error while decoding MB
61 18, bytestream (8779)
2008-12-31 05:20:24.434 [h264 @ 0x7fae468ba3e0]left block unavailable
for requested intra mode at 0 38
2008-12-31 05:20:24.434 [h264 @ 0x7fae468ba3e0]error while decoding MB 0
38, bytestream (31214)
2008-12-31 05:20:24.907 [h264 @ 0x7fae468ba3e0]left block unavailable
for requested intra mode at 0 26
2008-12-31 05:20:24.907 [h264 @ 0x7fae468ba3e0]error while decoding MB 0
26, bytestream (37075)
2008-12-31 05:20:25.376 [h264 @ 0x7fae468ba3e0]left block unavailable
for requested intra mode at 0 18
2008-12-31 05:20:25.377 [h264 @ 0x7fae468ba3e0]error while decoding MB 0
18, bytestream (5335)
2008-12-31 05:20:25.420 [h264 @ 0x7fae468ba3e0]error while decoding MB
70 39, bytestream (-12)
2008-12-31 05:20:25.421 [h264 @ 0x7fae468ba3e0]cabac decode of qscale
diff failed at 3 46
2008-12-31 05:20:25.421 [h264 @ 0x7fae468ba3e0]error while decoding MB 3
46, bytestream (5208)
2008-12-31 05:20:25.423 [h264 @ 0x7fae468ba3e0]error while decoding MB
22 57, bytestream (-7)
2008-12-31 05:20:25.758 [h264 @ 0x7fae468ba3e0]cabac decode of qscale
diff failed at 101 47
2008-12-31 05:20:25.758 [h264 @ 0x7fae468ba3e0]error while decoding MB
101 47, bytestream (13301)
2008-12-31 05:20:26.052 [dvbsub @ 0x7fae468ba3e0]Invalid y position!
2008-12-31 05:20:26.408 [dvbsub @ 0x7fae468ba3e0]Invalid y position!
2008-12-31 05:20:27.121 [h264 @ 0x7fae468ba3e0]error while decoding MB
78 55, bytestream (-23)
2008-12-31 05:20:31.759 [dvbsub @ 0x7fae468ba3e0]Invalid y position!
2008-12-31 05:20:33.602 [h264 @ 0x7fae468ba3e0]error while decoding MB
94 55, bytestream (-8)
2008-12-31 05:20:33.625 [h264 @ 0x7fae468ba3e0]left block unavailable
for requested intra mode at 0 25
2008-12-31 05:20:33.625 [h264 @ 0x7fae468ba3e0]error while decoding MB 0
25, bytestream (24144)
2008-12-31 05:20:34.967 [dvbsub @ 0x7fae468ba3e0]Invalid y position!
2008-12-31 05:20:35.314 [h264 @ 0x7fae468ba3e0]left block unavailable
for requested intra mode at 0 38
2008-12-31 05:20:35.314 [h264 @ 0x7fae468ba3e0]error while decoding MB 0
38, bytestream (9157)
2008-12-31 05:20:35.332 TV: Attempting to change from WatchingLiveTV to None
2008-12-31 05:20:35.527 TV: Changing from WatchingLiveTV to None
2008-12-31 05:20:35.628 DPMS Reactivated.
2008-12-31 05:20:37.124 Deleting UPnP client...
Error in my_thread_global_end(): 1 threads didn't exit
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.9 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org

iEYEARECAAYFAkl8laMACgkQpvOo+MDrK1GLFACeMjknThCY2re5Ag9I3tOCO+Ig
kuAAn10RyWd5nnWpMW8WBVRiWG3O0+/g
=qoTi
-----END PGP SIGNATURE-----

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Tomas Drajsajtl]

> Nat Geo HD and Histoy Channel HD are the only two HD channels I can
> lock, and I have problems with digital artefacts, lines across the
> screen missing data and tons of errors from the frontend. See below for
> error log.

Hi Jonas,
just guessing - try another card slot. If there are more devices on one IRQ
the transfer speed from the card can be lower and causing problems at
channels with higher bitrate. I had similar colision between PCI network and
sound cards. When I moved one card to another slot, the problem was solved.

Regards,
Tomas

Re: [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels

[Newsy Paper]

the transponders you don't get lock are problem transponders of s2-3200.
The driver is still not able to lock on dvb-s2 30000 3/4 transponders :(

Which software do you use to play HD content?
you need either xine-lib 1.2 with external ffmpeg (recent developer's version).
or xine-vdpau (if you have a NVIDIA graka that supports h264 hw acceleration).

regards 

Newsy


--- Tomas Drajsajtl <linux-dvb@drajsajtl.cz> schrieb am Mo, 26.1.2009:

> Von: Tomas Drajsajtl <linux-dvb@drajsajtl.cz>
> Betreff: Re: [linux-dvb] Technotrend Budget S2-3200 Digital artefacts on HDchannels
> An: linux-media@vger.kernel.org, linux-dvb@linuxtv.org
> Datum: Montag, 26. Januar 2009, 8:14
> > Nat Geo HD and Histoy Channel HD are the only two HD
> channels I can
> > lock, and I have problems with digital artefacts,
> lines across the
> > screen missing data and tons of errors from the
> frontend. See below for
> > error log.
> 
> Hi Jonas,
> just guessing - try another card slot. If there are more
> devices on one IRQ
> the transfer speed from the card can be lower and causing
> problems at
> channels with higher bitrate. I had similar colision
> between PCI network and
> sound cards. When I moved one card to another slot, the
> problem was solved.
> 
> Regards,
> Tomas
> 
> 
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead
> linux-media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb