* [PATCH] v4l/tvp514x: make the module aware of rich people @ 2009-01-12 18:24 Sebastian Andrzej Siewior 2009-01-12 18:49 ` Hiremath, Vaibhav 0 siblings, 1 reply; 8+ messages in thread From: Sebastian Andrzej Siewior @ 2009-01-12 18:24 UTC (permalink / raw) To: Vaibhav Hiremath; +Cc: linux-media, Mauro Carvalho Chehab, video4linux-list because they might design two of those chips on a single board. You never know. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> --- drivers/media/video/tvp514x.c | 52 +++++++++++++++++++++++----------------- 1 files changed, 30 insertions(+), 22 deletions(-) diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c index 8e23aa5..f9eb6dc 100644 --- a/drivers/media/video/tvp514x.c +++ b/drivers/media/video/tvp514x.c @@ -103,7 +103,7 @@ struct tvp514x_std_info { * @route: input and output routing at chip level */ struct tvp514x_decoder { - struct v4l2_int_device *v4l2_int_device; + struct v4l2_int_device v4l2_int_device; const struct tvp514x_platform_data *pdata; struct i2c_client *client; @@ -1369,17 +1369,14 @@ static struct tvp514x_decoder tvp514x_dev = { .current_std = STD_NTSC_MJ, .std_list = tvp514x_std_list, .num_stds = ARRAY_SIZE(tvp514x_std_list), - -}; - -static struct v4l2_int_device tvp514x_int_device = { - .module = THIS_MODULE, - .name = TVP514X_MODULE_NAME, - .priv = &tvp514x_dev, - .type = v4l2_int_type_slave, - .u = { - .slave = &tvp514x_slave, - }, + .v4l2_int_device = { + .module = THIS_MODULE, + .name = TVP514X_MODULE_NAME, + .type = v4l2_int_type_slave, + .u = { + .slave = &tvp514x_slave, + }, + }, }; /** @@ -1392,18 +1389,26 @@ static struct v4l2_int_device tvp514x_int_device = { static int tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct tvp514x_decoder *decoder = &tvp514x_dev; + struct tvp514x_decoder *decoder; int err; /* Check if the adapter supports the needed features */ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -EIO; - decoder->pdata = client->dev.platform_data; - if (!decoder->pdata) { + decoder = kzalloc(sizeof(*decoder), GFP_KERNEL); + if (!decoder) + return -ENOMEM; + + if (!client->dev.platform_data) { v4l_err(client, "No platform data!!\n"); - return -ENODEV; + err = -ENODEV; + goto out_free; } + + *decoder = tvp514x_dev; + decoder->v4l2_int_device.priv = decoder; + decoder->pdata = client->dev.platform_data; /* * Fetch platform specific data, and configure the * tvp514x_reg_list[] accordingly. Since this is one @@ -1419,23 +1424,26 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) */ decoder->id = (struct i2c_device_id *)id; /* Attach to Master */ - strcpy(tvp514x_int_device.u.slave->attach_to, decoder->pdata->master); - decoder->v4l2_int_device = &tvp514x_int_device; + strcpy(decoder->v4l2_int_device.u.slave->attach_to, decoder->pdata->master); decoder->client = client; i2c_set_clientdata(client, decoder); /* Register with V4L2 layer as slave device */ - err = v4l2_int_device_register(decoder->v4l2_int_device); + err = v4l2_int_device_register(&decoder->v4l2_int_device); if (err) { i2c_set_clientdata(client, NULL); v4l_err(client, "Unable to register to v4l2. Err[%d]\n", err); + goto out_free; } else v4l_info(client, "Registered to v4l2 master %s!!\n", decoder->pdata->master); - return 0; + +out_free: + kfree(decoder); + return err; } /** @@ -1452,9 +1460,9 @@ static int __exit tvp514x_remove(struct i2c_client *client) if (!client->adapter) return -ENODEV; /* our client isn't attached */ - v4l2_int_device_unregister(decoder->v4l2_int_device); + v4l2_int_device_unregister(&decoder->v4l2_int_device); i2c_set_clientdata(client, NULL); - + kfree(decoder); return 0; } /* -- 1.5.6.5 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* RE: [PATCH] v4l/tvp514x: make the module aware of rich people 2009-01-12 18:24 [PATCH] v4l/tvp514x: make the module aware of rich people Sebastian Andrzej Siewior @ 2009-01-12 18:49 ` Hiremath, Vaibhav 2009-01-22 21:19 ` Sebastian Andrzej Siewior 2009-01-28 15:29 ` [PATCH v2] " Sebastian Andrzej Siewior 0 siblings, 2 replies; 8+ messages in thread From: Hiremath, Vaibhav @ 2009-01-12 18:49 UTC (permalink / raw) To: Sebastian Andrzej Siewior Cc: linux-media@vger.kernel.org, Mauro Carvalho Chehab, video4linux-list@redhat.com Thanks, Vaibhav Hiremath > -----Original Message----- > From: Sebastian Andrzej Siewior [mailto:bigeasy@linutronix.de] > Sent: Monday, January 12, 2009 11:55 PM > To: Hiremath, Vaibhav > Cc: linux-media@vger.kernel.org; Mauro Carvalho Chehab; video4linux- > list@redhat.com > Subject: [PATCH] v4l/tvp514x: make the module aware of rich people > > because they might design two of those chips on a single board. > You never know. > [Hiremath, Vaibhav] Thanks, it was in my todo list. I will verify this patch tomorrow and let you know. > Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> > --- > drivers/media/video/tvp514x.c | 52 +++++++++++++++++++++++------- > ---------- > 1 files changed, 30 insertions(+), 22 deletions(-) > > diff --git a/drivers/media/video/tvp514x.c > b/drivers/media/video/tvp514x.c > index 8e23aa5..f9eb6dc 100644 > --- a/drivers/media/video/tvp514x.c > +++ b/drivers/media/video/tvp514x.c > @@ -103,7 +103,7 @@ struct tvp514x_std_info { > * @route: input and output routing at chip level > */ > struct tvp514x_decoder { > - struct v4l2_int_device *v4l2_int_device; > + struct v4l2_int_device v4l2_int_device; > const struct tvp514x_platform_data *pdata; > struct i2c_client *client; > > @@ -1369,17 +1369,14 @@ static struct tvp514x_decoder tvp514x_dev = > { > .current_std = STD_NTSC_MJ, > .std_list = tvp514x_std_list, > .num_stds = ARRAY_SIZE(tvp514x_std_list), > - > -}; > - > -static struct v4l2_int_device tvp514x_int_device = { > - .module = THIS_MODULE, > - .name = TVP514X_MODULE_NAME, > - .priv = &tvp514x_dev, > - .type = v4l2_int_type_slave, > - .u = { > - .slave = &tvp514x_slave, > - }, > + .v4l2_int_device = { > + .module = THIS_MODULE, > + .name = TVP514X_MODULE_NAME, > + .type = v4l2_int_type_slave, > + .u = { > + .slave = &tvp514x_slave, > + }, > + }, > }; > > /** > @@ -1392,18 +1389,26 @@ static struct v4l2_int_device > tvp514x_int_device = { > static int > tvp514x_probe(struct i2c_client *client, const struct i2c_device_id > *id) > { > - struct tvp514x_decoder *decoder = &tvp514x_dev; > + struct tvp514x_decoder *decoder; > int err; > > /* Check if the adapter supports the needed features */ > if (!i2c_check_functionality(client->adapter, > I2C_FUNC_SMBUS_BYTE_DATA)) > return -EIO; > > - decoder->pdata = client->dev.platform_data; > - if (!decoder->pdata) { > + decoder = kzalloc(sizeof(*decoder), GFP_KERNEL); > + if (!decoder) > + return -ENOMEM; > + > + if (!client->dev.platform_data) { > v4l_err(client, "No platform data!!\n"); > - return -ENODEV; > + err = -ENODEV; > + goto out_free; > } > + > + *decoder = tvp514x_dev; > + decoder->v4l2_int_device.priv = decoder; > + decoder->pdata = client->dev.platform_data; > /* > * Fetch platform specific data, and configure the > * tvp514x_reg_list[] accordingly. Since this is one > @@ -1419,23 +1424,26 @@ tvp514x_probe(struct i2c_client *client, > const struct i2c_device_id *id) > */ > decoder->id = (struct i2c_device_id *)id; > /* Attach to Master */ > - strcpy(tvp514x_int_device.u.slave->attach_to, decoder->pdata- > >master); > - decoder->v4l2_int_device = &tvp514x_int_device; > + strcpy(decoder->v4l2_int_device.u.slave->attach_to, decoder- > >pdata->master); > decoder->client = client; > i2c_set_clientdata(client, decoder); > > /* Register with V4L2 layer as slave device */ > - err = v4l2_int_device_register(decoder->v4l2_int_device); > + err = v4l2_int_device_register(&decoder->v4l2_int_device); > if (err) { > i2c_set_clientdata(client, NULL); > v4l_err(client, > "Unable to register to v4l2. Err[%d]\n", err); > + goto out_free; > > } else > v4l_info(client, "Registered to v4l2 master %s!!\n", > decoder->pdata->master); > - > return 0; > + > +out_free: > + kfree(decoder); > + return err; > } > > /** > @@ -1452,9 +1460,9 @@ static int __exit tvp514x_remove(struct > i2c_client *client) > if (!client->adapter) > return -ENODEV; /* our client isn't attached */ > > - v4l2_int_device_unregister(decoder->v4l2_int_device); > + v4l2_int_device_unregister(&decoder->v4l2_int_device); > i2c_set_clientdata(client, NULL); > - > + kfree(decoder); > return 0; > } > /* > -- > 1.5.6.5 > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] v4l/tvp514x: make the module aware of rich people 2009-01-12 18:49 ` Hiremath, Vaibhav @ 2009-01-22 21:19 ` Sebastian Andrzej Siewior 2009-01-28 15:29 ` [PATCH v2] " Sebastian Andrzej Siewior 1 sibling, 0 replies; 8+ messages in thread From: Sebastian Andrzej Siewior @ 2009-01-22 21:19 UTC (permalink / raw) To: Hiremath, Vaibhav Cc: linux-media@vger.kernel.org, Mauro Carvalho Chehab, video4linux-list@redhat.com Hiremath, Vaibhav wrote: > Thanks, > Vaibhav Hiremath > >> -----Original Message----- >> From: Sebastian Andrzej Siewior [mailto:bigeasy@linutronix.de] >> Sent: Monday, January 12, 2009 11:55 PM >> To: Hiremath, Vaibhav >> Cc: linux-media@vger.kernel.org; Mauro Carvalho Chehab; video4linux- >> list@redhat.com >> Subject: [PATCH] v4l/tvp514x: make the module aware of rich people >> >> because they might design two of those chips on a single board. >> You never know. >> > [Hiremath, Vaibhav] Thanks, it was in my todo list. I will verify this patch tomorrow and let you know. ping Sebastian ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2] v4l/tvp514x: make the module aware of rich people 2009-01-12 18:49 ` Hiremath, Vaibhav 2009-01-22 21:19 ` Sebastian Andrzej Siewior @ 2009-01-28 15:29 ` Sebastian Andrzej Siewior 2009-01-28 16:11 ` Hiremath, Vaibhav 2009-01-29 9:40 ` Hiremath, Vaibhav 1 sibling, 2 replies; 8+ messages in thread From: Sebastian Andrzej Siewior @ 2009-01-28 15:29 UTC (permalink / raw) To: Hiremath, Vaibhav Cc: linux-media@vger.kernel.org, Mauro Carvalho Chehab, video4linux-list@redhat.com because they might design two of those chips on a single board. You never know. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> --- v2: Make the content of the registers (brightness, \ldots) per decoder and not global. v1: Initial version drivers/media/video/tvp514x.c | 166 ++++++++++++++++++++++------------------- 1 files changed, 90 insertions(+), 76 deletions(-) diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c index 8e23aa5..99cfc40 100644 --- a/drivers/media/video/tvp514x.c +++ b/drivers/media/video/tvp514x.c @@ -86,45 +86,8 @@ struct tvp514x_std_info { struct v4l2_standard standard; }; -/** - * struct tvp514x_decoded - TVP5146/47 decoder object - * @v4l2_int_device: Slave handle - * @pdata: Board specific - * @client: I2C client data - * @id: Entry from I2C table - * @ver: Chip version - * @state: TVP5146/47 decoder state - detected or not-detected - * @pix: Current pixel format - * @num_fmts: Number of formats - * @fmt_list: Format list - * @current_std: Current standard - * @num_stds: Number of standards - * @std_list: Standards list - * @route: input and output routing at chip level - */ -struct tvp514x_decoder { - struct v4l2_int_device *v4l2_int_device; - const struct tvp514x_platform_data *pdata; - struct i2c_client *client; - - struct i2c_device_id *id; - - int ver; - enum tvp514x_state state; - - struct v4l2_pix_format pix; - int num_fmts; - const struct v4l2_fmtdesc *fmt_list; - - enum tvp514x_std current_std; - int num_stds; - struct tvp514x_std_info *std_list; - - struct v4l2_routing route; -}; - /* TVP514x default register values */ -static struct tvp514x_reg tvp514x_reg_list[] = { +static struct tvp514x_reg tvp514x_reg_list_default[] = { {TOK_WRITE, REG_INPUT_SEL, 0x05}, /* Composite selected */ {TOK_WRITE, REG_AFE_GAIN_CTRL, 0x0F}, {TOK_WRITE, REG_VIDEO_STD, 0x00}, /* Auto mode */ @@ -186,6 +149,44 @@ static struct tvp514x_reg tvp514x_reg_list[] = { {TOK_TERM, 0, 0}, }; +/** + * struct tvp514x_decoded - TVP5146/47 decoder object + * @v4l2_int_device: Slave handle + * @pdata: Board specific + * @client: I2C client data + * @id: Entry from I2C table + * @ver: Chip version + * @state: TVP5146/47 decoder state - detected or not-detected + * @pix: Current pixel format + * @num_fmts: Number of formats + * @fmt_list: Format list + * @current_std: Current standard + * @num_stds: Number of standards + * @std_list: Standards list + * @route: input and output routing at chip level + */ +struct tvp514x_decoder { + struct v4l2_int_device v4l2_int_device; + const struct tvp514x_platform_data *pdata; + struct i2c_client *client; + + struct i2c_device_id *id; + + int ver; + enum tvp514x_state state; + + struct v4l2_pix_format pix; + int num_fmts; + const struct v4l2_fmtdesc *fmt_list; + + enum tvp514x_std current_std; + int num_stds; + struct tvp514x_std_info *std_list; + + struct v4l2_routing route; + struct tvp514x_reg tvp514x_regs[ARRAY_SIZE(tvp514x_reg_list_default)]; +}; + /* List of image formats supported by TVP5146/47 decoder * Currently we are using 8 bit mode only, but can be * extended to 10/20 bit mode. @@ -422,7 +423,7 @@ static int tvp514x_configure(struct tvp514x_decoder *decoder) /* common register initialization */ err = - tvp514x_write_regs(decoder->client, tvp514x_reg_list); + tvp514x_write_regs(decoder->client, decoder->tvp514x_regs); if (err) return err; @@ -580,7 +581,7 @@ static int ioctl_s_std(struct v4l2_int_device *s, v4l2_std_id *std_id) return err; decoder->current_std = i; - tvp514x_reg_list[REG_VIDEO_STD].val = decoder->std_list[i].video_std; + decoder->tvp514x_regs[REG_VIDEO_STD].val = decoder->std_list[i].video_std; v4l_dbg(1, debug, decoder->client, "Standard set to: %s", decoder->std_list[i].standard.name); @@ -625,8 +626,8 @@ static int ioctl_s_routing(struct v4l2_int_device *s, if (err) return err; - tvp514x_reg_list[REG_INPUT_SEL].val = input_sel; - tvp514x_reg_list[REG_OUTPUT_FORMATTER1].val = output_sel; + decoder->tvp514x_regs[REG_INPUT_SEL].val = input_sel; + decoder->tvp514x_regs[REG_OUTPUT_FORMATTER1].val = output_sel; /* Clear status */ msleep(LOCK_RETRY_DELAY); @@ -779,16 +780,16 @@ ioctl_g_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) switch (ctrl->id) { case V4L2_CID_BRIGHTNESS: - ctrl->value = tvp514x_reg_list[REG_BRIGHTNESS].val; + ctrl->value = decoder->tvp514x_regs[REG_BRIGHTNESS].val; break; case V4L2_CID_CONTRAST: - ctrl->value = tvp514x_reg_list[REG_CONTRAST].val; + ctrl->value = decoder->tvp514x_regs[REG_CONTRAST].val; break; case V4L2_CID_SATURATION: - ctrl->value = tvp514x_reg_list[REG_SATURATION].val; + ctrl->value = decoder->tvp514x_regs[REG_SATURATION].val; break; case V4L2_CID_HUE: - ctrl->value = tvp514x_reg_list[REG_HUE].val; + ctrl->value = decoder->tvp514x_regs[REG_HUE].val; if (ctrl->value == 0x7F) ctrl->value = 180; else if (ctrl->value == 0x80) @@ -798,7 +799,7 @@ ioctl_g_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) break; case V4L2_CID_AUTOGAIN: - ctrl->value = tvp514x_reg_list[REG_AFE_GAIN_CTRL].val; + ctrl->value = decoder->tvp514x_regs[REG_AFE_GAIN_CTRL].val; if ((ctrl->value & 0x3) == 3) ctrl->value = 1; else @@ -848,7 +849,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) value); if (err) return err; - tvp514x_reg_list[REG_BRIGHTNESS].val = value; + decoder->tvp514x_regs[REG_BRIGHTNESS].val = value; break; case V4L2_CID_CONTRAST: if (ctrl->value < 0 || ctrl->value > 255) { @@ -861,7 +862,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) value); if (err) return err; - tvp514x_reg_list[REG_CONTRAST].val = value; + decoder->tvp514x_regs[REG_CONTRAST].val = value; break; case V4L2_CID_SATURATION: if (ctrl->value < 0 || ctrl->value > 255) { @@ -874,7 +875,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) value); if (err) return err; - tvp514x_reg_list[REG_SATURATION].val = value; + decoder->tvp514x_regs[REG_SATURATION].val = value; break; case V4L2_CID_HUE: if (value == 180) @@ -893,7 +894,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) value); if (err) return err; - tvp514x_reg_list[REG_HUE].val = value; + decoder->tvp514x_regs[REG_HUE].val = value; break; case V4L2_CID_AUTOGAIN: if (value == 1) @@ -910,7 +911,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct v4l2_control *ctrl) value); if (err) return err; - tvp514x_reg_list[REG_AFE_GAIN_CTRL].val = value; + decoder->tvp514x_regs[REG_AFE_GAIN_CTRL].val = value; break; default: v4l_err(decoder->client, @@ -1275,7 +1276,7 @@ static int ioctl_init(struct v4l2_int_device *s) struct tvp514x_decoder *decoder = s->priv; /* Set default standard to auto */ - tvp514x_reg_list[REG_VIDEO_STD].val = + decoder->tvp514x_regs[REG_VIDEO_STD].val = VIDEO_STD_AUTO_SWITCH_BIT; return tvp514x_configure(decoder); @@ -1369,17 +1370,14 @@ static struct tvp514x_decoder tvp514x_dev = { .current_std = STD_NTSC_MJ, .std_list = tvp514x_std_list, .num_stds = ARRAY_SIZE(tvp514x_std_list), - -}; - -static struct v4l2_int_device tvp514x_int_device = { - .module = THIS_MODULE, - .name = TVP514X_MODULE_NAME, - .priv = &tvp514x_dev, - .type = v4l2_int_type_slave, - .u = { - .slave = &tvp514x_slave, - }, + .v4l2_int_device = { + .module = THIS_MODULE, + .name = TVP514X_MODULE_NAME, + .type = v4l2_int_type_slave, + .u = { + .slave = &tvp514x_slave, + }, + }, }; /** @@ -1392,26 +1390,39 @@ static struct v4l2_int_device tvp514x_int_device = { static int tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct tvp514x_decoder *decoder = &tvp514x_dev; + struct tvp514x_decoder *decoder; int err; /* Check if the adapter supports the needed features */ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -EIO; - decoder->pdata = client->dev.platform_data; - if (!decoder->pdata) { + decoder = kzalloc(sizeof(*decoder), GFP_KERNEL); + if (!decoder) + return -ENOMEM; + + if (!client->dev.platform_data) { v4l_err(client, "No platform data!!\n"); - return -ENODEV; + err = -ENODEV; + goto out_free; } + + *decoder = tvp514x_dev; + decoder->v4l2_int_device.priv = decoder; + decoder->pdata = client->dev.platform_data; + + BUILD_BUG_ON(sizeof(decoder->tvp514x_regs) != + sizeof(tvp514x_reg_list_default)); + memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default, + sizeof(tvp514x_reg_list_default)); /* * Fetch platform specific data, and configure the * tvp514x_reg_list[] accordingly. Since this is one * time configuration, no need to preserve. */ - tvp514x_reg_list[REG_OUTPUT_FORMATTER2].val |= + decoder->tvp514x_regs[REG_OUTPUT_FORMATTER2].val |= (decoder->pdata->clk_polarity << 1); - tvp514x_reg_list[REG_SYNC_CONTROL].val |= + decoder->tvp514x_regs[REG_SYNC_CONTROL].val |= ((decoder->pdata->hs_polarity << 2) | (decoder->pdata->vs_polarity << 3)); /* @@ -1419,23 +1430,26 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id) */ decoder->id = (struct i2c_device_id *)id; /* Attach to Master */ - strcpy(tvp514x_int_device.u.slave->attach_to, decoder->pdata->master); - decoder->v4l2_int_device = &tvp514x_int_device; + strcpy(decoder->v4l2_int_device.u.slave->attach_to, decoder->pdata->master); decoder->client = client; i2c_set_clientdata(client, decoder); /* Register with V4L2 layer as slave device */ - err = v4l2_int_device_register(decoder->v4l2_int_device); + err = v4l2_int_device_register(&decoder->v4l2_int_device); if (err) { i2c_set_clientdata(client, NULL); v4l_err(client, "Unable to register to v4l2. Err[%d]\n", err); + goto out_free; } else v4l_info(client, "Registered to v4l2 master %s!!\n", decoder->pdata->master); - return 0; + +out_free: + kfree(decoder); + return err; } /** @@ -1452,9 +1466,9 @@ static int __exit tvp514x_remove(struct i2c_client *client) if (!client->adapter) return -ENODEV; /* our client isn't attached */ - v4l2_int_device_unregister(decoder->v4l2_int_device); + v4l2_int_device_unregister(&decoder->v4l2_int_device); i2c_set_clientdata(client, NULL); - + kfree(decoder); return 0; } /* -- 1.5.6.5 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* RE: [PATCH v2] v4l/tvp514x: make the module aware of rich people 2009-01-28 15:29 ` [PATCH v2] " Sebastian Andrzej Siewior @ 2009-01-28 16:11 ` Hiremath, Vaibhav 2009-01-28 16:22 ` Sebastian Andrzej Siewior 2009-01-29 9:40 ` Hiremath, Vaibhav 1 sibling, 1 reply; 8+ messages in thread From: Hiremath, Vaibhav @ 2009-01-28 16:11 UTC (permalink / raw) To: Sebastian Andrzej Siewior Cc: linux-media@vger.kernel.org, Mauro Carvalho Chehab, video4linux-list@redhat.com Thanks, Vaibhav Hiremath > -----Original Message----- > From: linux-media-owner@vger.kernel.org [mailto:linux-media- > owner@vger.kernel.org] On Behalf Of Sebastian Andrzej Siewior > Sent: Wednesday, January 28, 2009 9:00 PM > To: Hiremath, Vaibhav > Cc: linux-media@vger.kernel.org; Mauro Carvalho Chehab; video4linux- > list@redhat.com > Subject: [PATCH v2] v4l/tvp514x: make the module aware of rich > people > > because they might design two of those chips on a single board. > You never know. > [Hiremath, Vaibhav] I am really sorry; actually I was really busy with our internal release process and still going. Definitely I will try to find some time tomorrow to test this patch. > Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> > --- > v2: Make the content of the registers (brightness, \ldots) per > decoder > and not global. > v1: Initial version > [Hiremath, Vaibhav] Just for knowledge, how are you validating these changes? On which board are you testing/validating? > drivers/media/video/tvp514x.c | 166 ++++++++++++++++++++++-------- > ----------- > 1 files changed, 90 insertions(+), 76 deletions(-) > > diff --git a/drivers/media/video/tvp514x.c > b/drivers/media/video/tvp514x.c > index 8e23aa5..99cfc40 100644 > --- a/drivers/media/video/tvp514x.c > +++ b/drivers/media/video/tvp514x.c > @@ -86,45 +86,8 @@ struct tvp514x_std_info { > struct v4l2_standard standard; > }; > > -/** > - * struct tvp514x_decoded - TVP5146/47 decoder object > - * @v4l2_int_device: Slave handle > - * @pdata: Board specific > - * @client: I2C client data > - * @id: Entry from I2C table > - * @ver: Chip version > - * @state: TVP5146/47 decoder state - detected or not-detected > - * @pix: Current pixel format > - * @num_fmts: Number of formats > - * @fmt_list: Format list > - * @current_std: Current standard > - * @num_stds: Number of standards > - * @std_list: Standards list > - * @route: input and output routing at chip level > - */ > -struct tvp514x_decoder { > - struct v4l2_int_device *v4l2_int_device; > - const struct tvp514x_platform_data *pdata; > - struct i2c_client *client; > - > - struct i2c_device_id *id; > - > - int ver; > - enum tvp514x_state state; > - > - struct v4l2_pix_format pix; > - int num_fmts; > - const struct v4l2_fmtdesc *fmt_list; > - > - enum tvp514x_std current_std; > - int num_stds; > - struct tvp514x_std_info *std_list; > - > - struct v4l2_routing route; > -}; > - [Hiremath, Vaibhav] You may want to revisit this change, since there is only one line addition to the struct "struct tvp514x_reg". Patch will look clean if it only indicates the changes. > /* TVP514x default register values */ > -static struct tvp514x_reg tvp514x_reg_list[] = { > +static struct tvp514x_reg tvp514x_reg_list_default[] = { > {TOK_WRITE, REG_INPUT_SEL, 0x05}, /* Composite selected */ > {TOK_WRITE, REG_AFE_GAIN_CTRL, 0x0F}, > {TOK_WRITE, REG_VIDEO_STD, 0x00}, /* Auto mode */ > @@ -186,6 +149,44 @@ static struct tvp514x_reg tvp514x_reg_list[] = > { > {TOK_TERM, 0, 0}, > }; > > +/** > + * struct tvp514x_decoded - TVP5146/47 decoder object [Hiremath, Vaibhav] Please correct the spelling mistake "tvp514x_decoder", I had missed this in my original patch. > + * @v4l2_int_device: Slave handle > + * @pdata: Board specific > + * @client: I2C client data > + * @id: Entry from I2C table > + * @ver: Chip version > + * @state: TVP5146/47 decoder state - detected or not-detected > + * @pix: Current pixel format > + * @num_fmts: Number of formats > + * @fmt_list: Format list > + * @current_std: Current standard > + * @num_stds: Number of standards > + * @std_list: Standards list > + * @route: input and output routing at chip level [Hiremath, Vaibhav] You may want to add the new parameter added to this struct. > + */ > +struct tvp514x_decoder { > + struct v4l2_int_device v4l2_int_device; > + const struct tvp514x_platform_data *pdata; > + struct i2c_client *client; > + > + struct i2c_device_id *id; > + > + int ver; > + enum tvp514x_state state; > + > + struct v4l2_pix_format pix; > + int num_fmts; > + const struct v4l2_fmtdesc *fmt_list; > + > + enum tvp514x_std current_std; > + int num_stds; > + struct tvp514x_std_info *std_list; > + > + struct v4l2_routing route; > + struct tvp514x_reg > tvp514x_regs[ARRAY_SIZE(tvp514x_reg_list_default)]; > +}; > + > /* List of image formats supported by TVP5146/47 decoder > * Currently we are using 8 bit mode only, but can be > * extended to 10/20 bit mode. > @@ -422,7 +423,7 @@ static int tvp514x_configure(struct > tvp514x_decoder *decoder) > > /* common register initialization */ > err = > - tvp514x_write_regs(decoder->client, tvp514x_reg_list); > + tvp514x_write_regs(decoder->client, decoder- > >tvp514x_regs); > if (err) > return err; > > @@ -580,7 +581,7 @@ static int ioctl_s_std(struct v4l2_int_device > *s, v4l2_std_id *std_id) > return err; > > decoder->current_std = i; > - tvp514x_reg_list[REG_VIDEO_STD].val = decoder- > >std_list[i].video_std; > + decoder->tvp514x_regs[REG_VIDEO_STD].val = decoder- > >std_list[i].video_std; > > v4l_dbg(1, debug, decoder->client, "Standard set to: %s", > decoder->std_list[i].standard.name); > @@ -625,8 +626,8 @@ static int ioctl_s_routing(struct > v4l2_int_device *s, > if (err) > return err; > > - tvp514x_reg_list[REG_INPUT_SEL].val = input_sel; > - tvp514x_reg_list[REG_OUTPUT_FORMATTER1].val = output_sel; > + decoder->tvp514x_regs[REG_INPUT_SEL].val = input_sel; > + decoder->tvp514x_regs[REG_OUTPUT_FORMATTER1].val = output_sel; > > /* Clear status */ > msleep(LOCK_RETRY_DELAY); > @@ -779,16 +780,16 @@ ioctl_g_ctrl(struct v4l2_int_device *s, struct > v4l2_control *ctrl) > > switch (ctrl->id) { > case V4L2_CID_BRIGHTNESS: > - ctrl->value = tvp514x_reg_list[REG_BRIGHTNESS].val; > + ctrl->value = decoder->tvp514x_regs[REG_BRIGHTNESS].val; > break; > case V4L2_CID_CONTRAST: > - ctrl->value = tvp514x_reg_list[REG_CONTRAST].val; > + ctrl->value = decoder->tvp514x_regs[REG_CONTRAST].val; > break; > case V4L2_CID_SATURATION: > - ctrl->value = tvp514x_reg_list[REG_SATURATION].val; > + ctrl->value = decoder->tvp514x_regs[REG_SATURATION].val; > break; > case V4L2_CID_HUE: > - ctrl->value = tvp514x_reg_list[REG_HUE].val; > + ctrl->value = decoder->tvp514x_regs[REG_HUE].val; > if (ctrl->value == 0x7F) > ctrl->value = 180; > else if (ctrl->value == 0x80) > @@ -798,7 +799,7 @@ ioctl_g_ctrl(struct v4l2_int_device *s, struct > v4l2_control *ctrl) > > break; > case V4L2_CID_AUTOGAIN: > - ctrl->value = tvp514x_reg_list[REG_AFE_GAIN_CTRL].val; > + ctrl->value = decoder- > >tvp514x_regs[REG_AFE_GAIN_CTRL].val; > if ((ctrl->value & 0x3) == 3) > ctrl->value = 1; > else > @@ -848,7 +849,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct > v4l2_control *ctrl) > value); > if (err) > return err; > - tvp514x_reg_list[REG_BRIGHTNESS].val = value; > + decoder->tvp514x_regs[REG_BRIGHTNESS].val = value; > break; > case V4L2_CID_CONTRAST: > if (ctrl->value < 0 || ctrl->value > 255) { > @@ -861,7 +862,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct > v4l2_control *ctrl) > value); > if (err) > return err; > - tvp514x_reg_list[REG_CONTRAST].val = value; > + decoder->tvp514x_regs[REG_CONTRAST].val = value; > break; > case V4L2_CID_SATURATION: > if (ctrl->value < 0 || ctrl->value > 255) { > @@ -874,7 +875,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct > v4l2_control *ctrl) > value); > if (err) > return err; > - tvp514x_reg_list[REG_SATURATION].val = value; > + decoder->tvp514x_regs[REG_SATURATION].val = value; > break; > case V4L2_CID_HUE: > if (value == 180) > @@ -893,7 +894,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct > v4l2_control *ctrl) > value); > if (err) > return err; > - tvp514x_reg_list[REG_HUE].val = value; > + decoder->tvp514x_regs[REG_HUE].val = value; > break; > case V4L2_CID_AUTOGAIN: > if (value == 1) > @@ -910,7 +911,7 @@ ioctl_s_ctrl(struct v4l2_int_device *s, struct > v4l2_control *ctrl) > value); > if (err) > return err; > - tvp514x_reg_list[REG_AFE_GAIN_CTRL].val = value; > + decoder->tvp514x_regs[REG_AFE_GAIN_CTRL].val = value; > break; > default: > v4l_err(decoder->client, > @@ -1275,7 +1276,7 @@ static int ioctl_init(struct v4l2_int_device > *s) > struct tvp514x_decoder *decoder = s->priv; > > /* Set default standard to auto */ > - tvp514x_reg_list[REG_VIDEO_STD].val = > + decoder->tvp514x_regs[REG_VIDEO_STD].val = > VIDEO_STD_AUTO_SWITCH_BIT; > > return tvp514x_configure(decoder); > @@ -1369,17 +1370,14 @@ static struct tvp514x_decoder tvp514x_dev = > { > .current_std = STD_NTSC_MJ, > .std_list = tvp514x_std_list, > .num_stds = ARRAY_SIZE(tvp514x_std_list), > - > -}; > - > -static struct v4l2_int_device tvp514x_int_device = { > - .module = THIS_MODULE, > - .name = TVP514X_MODULE_NAME, > - .priv = &tvp514x_dev, > - .type = v4l2_int_type_slave, > - .u = { > - .slave = &tvp514x_slave, > - }, > + .v4l2_int_device = { > + .module = THIS_MODULE, > + .name = TVP514X_MODULE_NAME, > + .type = v4l2_int_type_slave, > + .u = { > + .slave = &tvp514x_slave, > + }, > + }, > }; > > /** > @@ -1392,26 +1390,39 @@ static struct v4l2_int_device > tvp514x_int_device = { > static int > tvp514x_probe(struct i2c_client *client, const struct i2c_device_id > *id) > { > - struct tvp514x_decoder *decoder = &tvp514x_dev; > + struct tvp514x_decoder *decoder; > int err; > > /* Check if the adapter supports the needed features */ > if (!i2c_check_functionality(client->adapter, > I2C_FUNC_SMBUS_BYTE_DATA)) > return -EIO; > > - decoder->pdata = client->dev.platform_data; > - if (!decoder->pdata) { > + decoder = kzalloc(sizeof(*decoder), GFP_KERNEL); > + if (!decoder) > + return -ENOMEM; > + > + if (!client->dev.platform_data) { > v4l_err(client, "No platform data!!\n"); > - return -ENODEV; > + err = -ENODEV; > + goto out_free; > } > + > + *decoder = tvp514x_dev; > + decoder->v4l2_int_device.priv = decoder; > + decoder->pdata = client->dev.platform_data; > + > + BUILD_BUG_ON(sizeof(decoder->tvp514x_regs) != > + sizeof(tvp514x_reg_list_default)); [Hiremath, Vaibhav] Do we really need to check this? I think you are defining the decoder->tvp514x_regs[sizeof(tvp514x_reg_list_default)]. > + memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default, > + sizeof(tvp514x_reg_list_default)); > /* > * Fetch platform specific data, and configure the > * tvp514x_reg_list[] accordingly. Since this is one > * time configuration, no need to preserve. > */ > - tvp514x_reg_list[REG_OUTPUT_FORMATTER2].val |= > + decoder->tvp514x_regs[REG_OUTPUT_FORMATTER2].val |= > (decoder->pdata->clk_polarity << 1); > - tvp514x_reg_list[REG_SYNC_CONTROL].val |= > + decoder->tvp514x_regs[REG_SYNC_CONTROL].val |= > ((decoder->pdata->hs_polarity << 2) | > (decoder->pdata->vs_polarity << 3)); > /* > @@ -1419,23 +1430,26 @@ tvp514x_probe(struct i2c_client *client, > const struct i2c_device_id *id) > */ > decoder->id = (struct i2c_device_id *)id; > /* Attach to Master */ > - strcpy(tvp514x_int_device.u.slave->attach_to, decoder->pdata- > >master); > - decoder->v4l2_int_device = &tvp514x_int_device; > + strcpy(decoder->v4l2_int_device.u.slave->attach_to, decoder- > >pdata->master); > decoder->client = client; > i2c_set_clientdata(client, decoder); > > /* Register with V4L2 layer as slave device */ > - err = v4l2_int_device_register(decoder->v4l2_int_device); > + err = v4l2_int_device_register(&decoder->v4l2_int_device); > if (err) { > i2c_set_clientdata(client, NULL); > v4l_err(client, > "Unable to register to v4l2. Err[%d]\n", err); > + goto out_free; > > } else > v4l_info(client, "Registered to v4l2 master %s!!\n", > decoder->pdata->master); > - > return 0; > + > +out_free: > + kfree(decoder); > + return err; > } > > /** > @@ -1452,9 +1466,9 @@ static int __exit tvp514x_remove(struct > i2c_client *client) > if (!client->adapter) > return -ENODEV; /* our client isn't attached */ > > - v4l2_int_device_unregister(decoder->v4l2_int_device); > + v4l2_int_device_unregister(&decoder->v4l2_int_device); > i2c_set_clientdata(client, NULL); > - > + kfree(decoder); > return 0; > } > /* > -- > 1.5.6.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux- > media" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2] v4l/tvp514x: make the module aware of rich people 2009-01-28 16:11 ` Hiremath, Vaibhav @ 2009-01-28 16:22 ` Sebastian Andrzej Siewior 2009-01-28 16:39 ` Hiremath, Vaibhav 0 siblings, 1 reply; 8+ messages in thread From: Sebastian Andrzej Siewior @ 2009-01-28 16:22 UTC (permalink / raw) To: Hiremath, Vaibhav Cc: linux-media@vger.kernel.org, Mauro Carvalho Chehab, video4linux-list@redhat.com Hiremath, Vaibhav wrote: > [Hiremath, Vaibhav] I am really sorry; actually I was really busy with our internal release process and still going. > Definitely I will try to find some time tomorrow to test this patch. No problem. >> v2: Make the content of the registers (brightness, \ldots) per >> decoder >> and not global. >> v1: Initial version >> > [Hiremath, Vaibhav] Just for knowledge, how are you validating these changes? On which board are you testing/validating? This is custom design. My HW vendor was using advXXXX chips in the past but was not very happy with them and switch over to this chip. >> drivers/media/video/tvp514x.c | 166 ++++++++++++++++++++++-------- >> ----------- >> 1 files changed, 90 insertions(+), 76 deletions(-) >> >> diff --git a/drivers/media/video/tvp514x.c >> b/drivers/media/video/tvp514x.c >> index 8e23aa5..99cfc40 100644 >> --- a/drivers/media/video/tvp514x.c >> +++ b/drivers/media/video/tvp514x.c >> @@ -86,45 +86,8 @@ struct tvp514x_std_info { >> struct v4l2_standard standard; >> }; >> >> -/** >> - * struct tvp514x_decoded - TVP5146/47 decoder object >> - * @v4l2_int_device: Slave handle >> - * @pdata: Board specific >> - * @client: I2C client data >> - * @id: Entry from I2C table >> - * @ver: Chip version >> - * @state: TVP5146/47 decoder state - detected or not-detected >> - * @pix: Current pixel format >> - * @num_fmts: Number of formats >> - * @fmt_list: Format list >> - * @current_std: Current standard >> - * @num_stds: Number of standards >> - * @std_list: Standards list >> - * @route: input and output routing at chip level >> - */ >> -struct tvp514x_decoder { >> - struct v4l2_int_device *v4l2_int_device; >> - const struct tvp514x_platform_data *pdata; >> - struct i2c_client *client; >> - >> - struct i2c_device_id *id; >> - >> - int ver; >> - enum tvp514x_state state; >> - >> - struct v4l2_pix_format pix; >> - int num_fmts; >> - const struct v4l2_fmtdesc *fmt_list; >> - >> - enum tvp514x_std current_std; >> - int num_stds; >> - struct tvp514x_std_info *std_list; >> - >> - struct v4l2_routing route; >> -}; >> - > > [Hiremath, Vaibhav] You may want to revisit this change, since there is only one line addition to the struct "struct tvp514x_reg". Patch will look clean if it only indicates the changes. I'm adding also | + struct tvp514x_reg | tvp514x_regs[ARRAY_SIZE(tvp514x_reg_list_default)]; which contains vp514x_reg_list_default which is defined below. I prefered not to do a forward declration of tvp514x_reg_list_default and therefore I moved tvp514x_decoder just after it. Would you prefer it with a forward declarion? >> /* TVP514x default register values */ >> -static struct tvp514x_reg tvp514x_reg_list[] = { >> +static struct tvp514x_reg tvp514x_reg_list_default[] = { >> {TOK_WRITE, REG_INPUT_SEL, 0x05}, /* Composite selected */ >> {TOK_WRITE, REG_AFE_GAIN_CTRL, 0x0F}, >> {TOK_WRITE, REG_VIDEO_STD, 0x00}, /* Auto mode */ >> @@ -186,6 +149,44 @@ static struct tvp514x_reg tvp514x_reg_list[] = >> { >> {TOK_TERM, 0, 0}, >> }; >> >> +/** >> + * struct tvp514x_decoded - TVP5146/47 decoder object > > [Hiremath, Vaibhav] Please correct the spelling mistake > "tvp514x_decoder", I had missed this in my original patch. okay. >> + * @v4l2_int_device: Slave handle >> + * @pdata: Board specific >> + * @client: I2C client data >> + * @id: Entry from I2C table >> + * @ver: Chip version >> + * @state: TVP5146/47 decoder state - detected or not-detected >> + * @pix: Current pixel format >> + * @num_fmts: Number of formats >> + * @fmt_list: Format list >> + * @current_std: Current standard >> + * @num_stds: Number of standards >> + * @std_list: Standards list >> + * @route: input and output routing at chip level > [Hiremath, Vaibhav] You may want to add the new parameter added to this struct. good point. >> + */ >> +struct tvp514x_decoder { >> + struct v4l2_int_device v4l2_int_device; >> + const struct tvp514x_platform_data *pdata; >> + struct i2c_client *client; >> + >> + struct i2c_device_id *id; >> + >> + int ver; >> + enum tvp514x_state state; >> + >> + struct v4l2_pix_format pix; >> + int num_fmts; >> + const struct v4l2_fmtdesc *fmt_list; >> + >> + enum tvp514x_std current_std; >> + int num_stds; >> + struct tvp514x_std_info *std_list; >> + >> + struct v4l2_routing route; >> + struct tvp514x_reg >> tvp514x_regs[ARRAY_SIZE(tvp514x_reg_list_default)]; >> +}; >> + >> /* List of image formats supported by TVP5146/47 decoder >> * Currently we are using 8 bit mode only, but can be >> * extended to 10/20 bit mode. >> @@ -1392,26 +1390,39 @@ static struct v4l2_int_device >> tvp514x_int_device = { >> static int >> tvp514x_probe(struct i2c_client *client, const struct i2c_device_id >> *id) >> { >> - struct tvp514x_decoder *decoder = &tvp514x_dev; >> + struct tvp514x_decoder *decoder; >> int err; >> >> /* Check if the adapter supports the needed features */ >> if (!i2c_check_functionality(client->adapter, >> I2C_FUNC_SMBUS_BYTE_DATA)) >> return -EIO; >> >> - decoder->pdata = client->dev.platform_data; >> - if (!decoder->pdata) { >> + decoder = kzalloc(sizeof(*decoder), GFP_KERNEL); >> + if (!decoder) >> + return -ENOMEM; >> + >> + if (!client->dev.platform_data) { >> v4l_err(client, "No platform data!!\n"); >> - return -ENODEV; >> + err = -ENODEV; >> + goto out_free; >> } >> + >> + *decoder = tvp514x_dev; >> + decoder->v4l2_int_device.priv = decoder; >> + decoder->pdata = client->dev.platform_data; >> + >> + BUILD_BUG_ON(sizeof(decoder->tvp514x_regs) != >> + sizeof(tvp514x_reg_list_default)); > [Hiremath, Vaibhav] Do we really need to check this? I think you are defining the decoder->tvp514x_regs[sizeof(tvp514x_reg_list_default)]. I can get rid of it if you want. It is just a sanity check. >> + memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default, >> + sizeof(tvp514x_reg_list_default)); ^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: [PATCH v2] v4l/tvp514x: make the module aware of rich people 2009-01-28 16:22 ` Sebastian Andrzej Siewior @ 2009-01-28 16:39 ` Hiremath, Vaibhav 0 siblings, 0 replies; 8+ messages in thread From: Hiremath, Vaibhav @ 2009-01-28 16:39 UTC (permalink / raw) To: Sebastian Andrzej Siewior Cc: linux-media@vger.kernel.org, Mauro Carvalho Chehab, video4linux-list@redhat.com Thanks, Vaibhav Hiremath > -----Original Message----- > From: Sebastian Andrzej Siewior [mailto:bigeasy@linutronix.de] > Sent: Wednesday, January 28, 2009 9:52 PM > To: Hiremath, Vaibhav > Cc: linux-media@vger.kernel.org; Mauro Carvalho Chehab; video4linux- > list@redhat.com > Subject: Re: [PATCH v2] v4l/tvp514x: make the module aware of rich > people > > Hiremath, Vaibhav wrote: > > [Hiremath, Vaibhav] I am really sorry; actually I was really busy > with our internal release process and still going. > > Definitely I will try to find some time tomorrow to test this > patch. > No problem. > > >> v2: Make the content of the registers (brightness, \ldots) per > >> decoder > >> and not global. > >> v1: Initial version > >> > > [Hiremath, Vaibhav] Just for knowledge, how are you validating > these changes? On which board are you testing/validating? > This is custom design. My HW vendor was using advXXXX chips in the > past > but was not very happy with them and switch over to this chip. > > >> drivers/media/video/tvp514x.c | 166 ++++++++++++++++++++++----- > --- > >> ----------- > >> 1 files changed, 90 insertions(+), 76 deletions(-) > >> > >> diff --git a/drivers/media/video/tvp514x.c > >> b/drivers/media/video/tvp514x.c > >> index 8e23aa5..99cfc40 100644 > >> --- a/drivers/media/video/tvp514x.c > >> +++ b/drivers/media/video/tvp514x.c > >> @@ -86,45 +86,8 @@ struct tvp514x_std_info { > >> struct v4l2_standard standard; > >> }; > >> > >> -/** > >> - * struct tvp514x_decoded - TVP5146/47 decoder object > >> - * @v4l2_int_device: Slave handle > >> - * @pdata: Board specific > >> - * @client: I2C client data > >> - * @id: Entry from I2C table > >> - * @ver: Chip version > >> - * @state: TVP5146/47 decoder state - detected or not-detected > >> - * @pix: Current pixel format > >> - * @num_fmts: Number of formats > >> - * @fmt_list: Format list > >> - * @current_std: Current standard > >> - * @num_stds: Number of standards > >> - * @std_list: Standards list > >> - * @route: input and output routing at chip level > >> - */ > >> -struct tvp514x_decoder { > >> - struct v4l2_int_device *v4l2_int_device; > >> - const struct tvp514x_platform_data *pdata; > >> - struct i2c_client *client; > >> - > >> - struct i2c_device_id *id; > >> - > >> - int ver; > >> - enum tvp514x_state state; > >> - > >> - struct v4l2_pix_format pix; > >> - int num_fmts; > >> - const struct v4l2_fmtdesc *fmt_list; > >> - > >> - enum tvp514x_std current_std; > >> - int num_stds; > >> - struct tvp514x_std_info *std_list; > >> - > >> - struct v4l2_routing route; > >> -}; > >> - > > > > [Hiremath, Vaibhav] You may want to revisit this change, since > there is only one line addition to the struct "struct tvp514x_reg". > Patch will look clean if it only indicates the changes. > I'm adding also > | + struct tvp514x_reg > | tvp514x_regs[ARRAY_SIZE(tvp514x_reg_list_default)]; > [Hiremath, Vaibhav] This is the only line I was also talking about. > which contains vp514x_reg_list_default which is defined below. I > prefered > not to do a forward declration of tvp514x_reg_list_default and > therefore I > moved tvp514x_decoder just after it. > Would you prefer it with a forward declarion? > [Hiremath, Vaibhav] Since this is static and default declaration I would prefer it to be moved above struct tvp514x_decoder. > >> /* TVP514x default register values */ > >> -static struct tvp514x_reg tvp514x_reg_list[] = { > >> +static struct tvp514x_reg tvp514x_reg_list_default[] = { > >> {TOK_WRITE, REG_INPUT_SEL, 0x05}, /* Composite selected */ > >> {TOK_WRITE, REG_AFE_GAIN_CTRL, 0x0F}, > >> {TOK_WRITE, REG_VIDEO_STD, 0x00}, /* Auto mode */ > >> @@ -186,6 +149,44 @@ static struct tvp514x_reg tvp514x_reg_list[] > = > >> { > >> {TOK_TERM, 0, 0}, > >> }; > >> > >> +/** > >> + * struct tvp514x_decoded - TVP5146/47 decoder object > > > > [Hiremath, Vaibhav] Please correct the spelling mistake > > "tvp514x_decoder", I had missed this in my original patch. > okay. > > >> + * @v4l2_int_device: Slave handle > >> + * @pdata: Board specific > >> + * @client: I2C client data > >> + * @id: Entry from I2C table > >> + * @ver: Chip version > >> + * @state: TVP5146/47 decoder state - detected or not-detected > >> + * @pix: Current pixel format > >> + * @num_fmts: Number of formats > >> + * @fmt_list: Format list > >> + * @current_std: Current standard > >> + * @num_stds: Number of standards > >> + * @std_list: Standards list > >> + * @route: input and output routing at chip level > > [Hiremath, Vaibhav] You may want to add the new parameter added to > this struct. > good point. > > >> + */ > >> +struct tvp514x_decoder { > >> + struct v4l2_int_device v4l2_int_device; > >> + const struct tvp514x_platform_data *pdata; > >> + struct i2c_client *client; > >> + > >> + struct i2c_device_id *id; > >> + > >> + int ver; > >> + enum tvp514x_state state; > >> + > >> + struct v4l2_pix_format pix; > >> + int num_fmts; > >> + const struct v4l2_fmtdesc *fmt_list; > >> + > >> + enum tvp514x_std current_std; > >> + int num_stds; > >> + struct tvp514x_std_info *std_list; > >> + > >> + struct v4l2_routing route; > >> + struct tvp514x_reg > >> tvp514x_regs[ARRAY_SIZE(tvp514x_reg_list_default)]; > >> +}; > >> + > >> /* List of image formats supported by TVP5146/47 decoder > >> * Currently we are using 8 bit mode only, but can be > >> * extended to 10/20 bit mode. > > >> @@ -1392,26 +1390,39 @@ static struct v4l2_int_device > >> tvp514x_int_device = { > >> static int > >> tvp514x_probe(struct i2c_client *client, const struct > i2c_device_id > >> *id) > >> { > >> - struct tvp514x_decoder *decoder = &tvp514x_dev; > >> + struct tvp514x_decoder *decoder; > >> int err; > >> > >> /* Check if the adapter supports the needed features */ > >> if (!i2c_check_functionality(client->adapter, > >> I2C_FUNC_SMBUS_BYTE_DATA)) > >> return -EIO; > >> > >> - decoder->pdata = client->dev.platform_data; > >> - if (!decoder->pdata) { > >> + decoder = kzalloc(sizeof(*decoder), GFP_KERNEL); > >> + if (!decoder) > >> + return -ENOMEM; > >> + > >> + if (!client->dev.platform_data) { > >> v4l_err(client, "No platform data!!\n"); > >> - return -ENODEV; > >> + err = -ENODEV; > >> + goto out_free; > >> } > >> + > >> + *decoder = tvp514x_dev; > >> + decoder->v4l2_int_device.priv = decoder; > >> + decoder->pdata = client->dev.platform_data; > >> + > >> + BUILD_BUG_ON(sizeof(decoder->tvp514x_regs) != > >> + sizeof(tvp514x_reg_list_default)); > > [Hiremath, Vaibhav] Do we really need to check this? I think you > are defining the decoder- > >tvp514x_regs[sizeof(tvp514x_reg_list_default)]. > I can get rid of it if you want. It is just a sanity check. > [Hiremath, Vaibhav] I think there is no need to add unnecessary check here, you can remove this. > >> + memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default, > >> + sizeof(tvp514x_reg_list_default)); > ^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: [PATCH v2] v4l/tvp514x: make the module aware of rich people 2009-01-28 15:29 ` [PATCH v2] " Sebastian Andrzej Siewior 2009-01-28 16:11 ` Hiremath, Vaibhav @ 2009-01-29 9:40 ` Hiremath, Vaibhav 1 sibling, 0 replies; 8+ messages in thread From: Hiremath, Vaibhav @ 2009-01-29 9:40 UTC (permalink / raw) To: Sebastian Andrzej Siewior Cc: linux-media@vger.kernel.org, Mauro Carvalho Chehab, video4linux-list@redhat.com Thanks, Vaibhav Hiremath > -----Original Message----- > From: linux-media-owner@vger.kernel.org [mailto:linux-media- > owner@vger.kernel.org] On Behalf Of Sebastian Andrzej Siewior > Sent: Wednesday, January 28, 2009 9:00 PM > To: Hiremath, Vaibhav > Cc: linux-media@vger.kernel.org; Mauro Carvalho Chehab; video4linux- > list@redhat.com > Subject: [PATCH v2] v4l/tvp514x: make the module aware of rich > people > > because they might design two of those chips on a single board. > You never know. > > Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> > --- > v2: Make the content of the registers (brightness, \ldots) per > decoder > and not global. > v1: Initial version > > drivers/media/video/tvp514x.c | 166 ++++++++++++++++++++++-------- > ----------- > 1 files changed, 90 insertions(+), 76 deletions(-) > [Hiremath, Vaibhav] Sebastian, I have done the basic testing and it seems to be working for me. I will ack the patch from my side once you fix the comments. > diff --git a/drivers/media/video/tvp514x.c > b/drivers/media/video/tvp514x.c > index 8e23aa5..99cfc40 100644 > --- a/drivers/media/video/tvp514x.c > +++ b/drivers/media/video/tvp514x.c > @@ -86,45 +86,8 @@ struct tvp514x_std_info { > struct v4l2_standard standard; > }; > > -/** ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2009-01-29 9:40 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2009-01-12 18:24 [PATCH] v4l/tvp514x: make the module aware of rich people Sebastian Andrzej Siewior 2009-01-12 18:49 ` Hiremath, Vaibhav 2009-01-22 21:19 ` Sebastian Andrzej Siewior 2009-01-28 15:29 ` [PATCH v2] " Sebastian Andrzej Siewior 2009-01-28 16:11 ` Hiremath, Vaibhav 2009-01-28 16:22 ` Sebastian Andrzej Siewior 2009-01-28 16:39 ` Hiremath, Vaibhav 2009-01-29 9:40 ` Hiremath, Vaibhav
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox