From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.kapsi.fi ([217.30.184.167]:33028 "EHLO mail.kapsi.fi" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753188AbZBBUYo (ORCPT ); Mon, 2 Feb 2009 15:24:44 -0500 Message-ID: <4987568A.6060504@iki.fi> Date: Mon, 02 Feb 2009 22:24:42 +0200 From: Antti Palosaari MIME-Version: 1.0 To: linux-media@vger.kernel.org CC: linux-dvb@linuxtv.org, Andrew Williams Subject: Re: [linux-dvb] KWorld PlusTV Dual DVB-T Stick (DVB-T 399U) / AF9015 - Dual tuner enabled by default =Bad signal reception References: <546B4176F0487A4CBA62FC16EFC1D9D6026FC2@EXCHANGE.joratech.com> In-Reply-To: <546B4176F0487A4CBA62FC16EFC1D9D6026FC2@EXCHANGE.joratech.com> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: Hello Andrew, Andrew Williams wrote: > In the past I have had problems with reception for the AF9015 if both > tuners were enabled. > It was disabled by default or I could manually enable dual tuners with > dvb-usb-af9015 dual_mode=1 (modprobe.d/options) > > If both tuners were enabled there was a lot of signal degradation, > however, with only 1 tuner enabled the quality was VERY good. Yes, it really looks like there is some sensitivity drop when both tuners are enabled. However in my understanding tuner #1 in dual mode have almost same performance than tuner #0 in single mode. Also current MXL5005S tuner driver has not best performance... Could you test if that tuner driver performs any better for you: http://linuxtv.org/hg/~anttip/af9015-mxl500x/ > I have just downloaded the latest drivers and it seems that both tuners > are enabled by default and there is no parameter that I can find to > disable the second tuner. > Now I am back to where I was before with bad signal degradation but no > way to disable the second tuner. Yes, I removed whole parameter. If there will be much negative feedback then I should consider add that parameter back - but probably dual mode enabled by default. > With drivers dated 22 Dec 2008 the second tuner was still disabled by > default. Also the driver from 22 December 2008 lit an LED on the Tuner > to indicate that the firmware was loaded/stick was initialised. > Something that I did not have before (the LED). > > Now with the latest driver, the LED does not function anymore but more > importantly, both tuners are enabled by default. hmm, haven't changed LED controls. I should look that later. > Is there any way that I can disable the second tuner without having to > revert to the old drivers? Not currently. I will wait some feedback and make decision about that. Thank you for feedback. regards Antti -- http://palosaari.fi/