Re: [linux-dvb] Mantis Update was Re: Twinhan DTV Ter-CI (3030 Mantis) ???

From: Manu Abraham <abraham.manu@gmail.com>
To: Ruediger Dohmhardt <ruediger.dohmhardt@freenet.de>
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] Mantis Update was Re: Twinhan DTV Ter-CI (3030 Mantis) ???
Date: Sun, 08 Feb 2009 01:45:22 +0400	[thread overview]
Message-ID: <498E00F2.5050202@gmail.com> (raw)
In-Reply-To: <498DEDA9.7010905@freenet.de>

Ruediger Dohmhardt wrote:
> Manu Abraham schrieb:
>> Have added initial support for this card, as well as a large
>> overhaul of the driver for a couple of performance impacts.
>>
>> Please do test with the latest updates from http://jusst.de/hg/mantis.
>>   
> Hi Manu
> the versions from January and February 2009 compile fine on the
> SUSE-11.1 kernel 2.6.27.7-9-default x86_64.
> The modules for my Twinhan AD-CP300 (2033) load fine, too.
> 
> However, the devices below /dev/dvb are NOT created, and hence vdr-1.7
> does not work.
> The card works with the s2-liplianin driver.
> 
> I assume it is interrupt related as listed in the lines from
> /var/log/messages
> 
> 
> Feb  7 21:03:38 mt40 su: (to root) rudi on /dev/pts/1
> Feb  7 21:03:48 mt40 kernel: vendor=1002 device=4371
> Feb  7 21:03:48 mt40 kernel: Mantis 0000:02:01.0: PCI INT A -> GSI 21
> (level, low) -> IRQ 21
> Feb  7 21:03:48 mt40 kernel: DVB: registering new adapter (Mantis DVB
> adapter)
> Feb  7 21:03:48 mt40 kernel: vendor=1002 device=4371
> Feb  7 21:03:48 mt40 kernel: Mantis 0000:02:01.0: PCI INT A disabled
> Feb  7 21:03:48 mt40 kernel: Mantis: probe of 0000:02:01.0 failed with
> error -1
> Feb  7 21:05:03 mt40 vdr: [4320] cTimeMs: using monotonic clock
> (resolution is 1 ns)
> Feb  7 21:05:03 mt40 vdr: [4320] VDR version 1.7.0 started
> Feb  7 21:05:03 mt40 vdr: [4320] codeset is 'UTF-8' - known
> Feb  7 21:05:03 mt40 vdr: [4320] ERROR: ./locale: Datei oder Verzeichnis
> nicht gefunden
> Feb  7 21:05:03 mt40 vdr: [4320] no locale for language code 'deu,ger'
> Feb  7 21:05:03 mt40 vdr: [4320] no locale for language code 'slv,slo'
> Feb  7 21:05:03 mt40 vdr: [4320] no locale for language code 'ita'
> Feb  7 21:05:05 mt40 vdr: [4320] no DVB device found
> 
> I wonder whether I can check something more to get your driver back to work

Can you please load the mantis module with the verbose=5 module
parameter and try again ? At least it will show what's failing.

Regards,
Manu

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb