Driver for this DVB-T tuner?

Driver for this DVB-T tuner?

[Stefan Czinczoll]

Hi all,

I'm trying to get my Terratec DVB-T USB (Cinergy T USB XE MKII) working
with linux. Any chance in the near future? It works with Windumb & BDA
drivers, but this is not what i want... ;-)

Below is from dmesg output.

Kind regards,

Stefan

[..]
dvb-usb: found a 'TerraTec Cinergy T USB XE' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (TerraTec Cinergy T USB XE)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
forcedeth 0000:00:05.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
af9013: firmware version:4.65.0
DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
af9015: Freescale MC44S803 tuner found but no driver for thattuner. Look
at the Linuxtv.org for tuner driver
status.
dvb-usb: TerraTec Cinergy T USB XE successfully initialized and
connected.
usbcore: registered new interface driver dvb_usb_af9015
[..]

-- 
Stefan Czinczoll <schollsky@arcor.de>

Re: Driver for this DVB-T tuner?

[Antti Palosaari]

Stefan Czinczoll wrote:
> I'm trying to get my Terratec DVB-T USB (Cinergy T USB XE MKII) working
> with linux. Any chance in the near future? It works with Windumb & BDA
> drivers, but this is not what i want... ;-)

You should use driver from
http://linuxtv.org/hg/~anttip/mc44s803/

> af9013: firmware version:4.65.0

Use 4.95.0 instead.

> DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
> af9015: Freescale MC44S803 tuner found but no driver for thattuner. Look
> at the Linuxtv.org for tuner driver
> status.

regards
Antti

Aw: Re: Driver for this DVB-T tuner?

[schollsky]

Wow that was fast! Thanks!!!

> You should use driver from
> http://linuxtv.org/hg/~anttip/mc44s803/

I managed to do that.

> > af9013: firmware version:4.65.0
> 
> Use 4.95.0 instead.

How do I insert it correctly into the source tree? 
A short hint (to a readme) should help. 

Thanks again!

Stefan 

Re: Aw: Re: Driver for this DVB-T tuner?

[Antti Palosaari]

schollsky@arcor.de wrote:
> Wow that was fast! Thanks!!!
> 
>> You should use driver from
>> http://linuxtv.org/hg/~anttip/mc44s803/
> 
> I managed to do that.
> 
>>> af9013: firmware version:4.65.0
>> Use 4.95.0 instead.
> 
> How do I insert it correctly into the source tree? 
> A short hint (to a readme) should help. 

Sorry, didn't understand what you mean.

Anyhow, Mauro just committed this driver to the master, you can now use 
v4l-dvb -master instead.
http://linuxtv.org/repo/

regards
Antti
-- 
http://palosaari.fi/

Re: Driver for this DVB-T tuner?

[schollsky]

 


----- Original Nachricht ----
Von:     Antti Palosaari <crope@iki.fi>
An:      schollsky@arcor.de
Datum:   09.02.2009 22:26
Betreff: Re: Aw: Re: Driver for this DVB-T tuner?

> schollsky@arcor.de wrote:
> > Wow that was fast! Thanks!!!
> > 
> >> You should use driver from
> >> http://linuxtv.org/hg/~anttip/mc44s803/
> > 
> > I managed to do that.
> > 
> >>> af9013: firmware version:4.65.0
> >> Use 4.95.0 instead.
> > 
> > How do I insert it correctly into the source tree? 
> > A short hint (to a readme) should help. 
> 
> Sorry, didn't understand what you mean.

I've downloaded the af9015 firmware version 4.95.0 from here:

http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/

but simply downloading and installing into /lib/firmware seems to be not enough here (Mandriva 2009.0).

> Anyhow, Mauro just committed this driver to the master, you can now use 

I did so, but firmware 4.95.0 is not included?!?

Thanks,

Stefan

Re: Driver for this DVB-T tuner?

[schollsky]

 


----- Original Nachricht ----
Von:     Antti Palosaari <crope@iki.fi>
An:      schollsky@arcor.de
Datum:   09.02.2009 22:26
Betreff: Re: Aw: Re: Driver for this DVB-T tuner?

> schollsky@arcor.de wrote:
> > Wow that was fast! Thanks!!!
> > 
> >> You should use driver from
> >> http://linuxtv.org/hg/~anttip/mc44s803/
> > 
> > I managed to do that.
> > 
> >>> af9013: firmware version:4.65.0
> >> Use 4.95.0 instead.
> > 
> > How do I insert it correctly into the source tree? 
> > A short hint (to a readme) should help. 
> 
> Sorry, didn't understand what you mean.

I've downloaded the af9015 firmware version 4.95.0 from here:

http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/

but simply downloading and installing into /lib/firmware seems to be not enough here (Mandriva 2009.0).

> Anyhow, Mauro just committed this driver to the master, you can now use 

I did so, but firmware 4.95.0 is not included?!?

Thanks,

Stefan

Re: Driver for this DVB-T tuner?

[schollsky]

 


----- Original Nachricht ----
Von:     Antti Palosaari <crope@iki.fi>
An:      schollsky@arcor.de
Datum:   09.02.2009 22:26
Betreff: Re: Aw: Re: Driver for this DVB-T tuner?

> schollsky@arcor.de wrote:
> > Wow that was fast! Thanks!!!
> > 
> >> You should use driver from
> >> http://linuxtv.org/hg/~anttip/mc44s803/
> > 
> > I managed to do that.
> > 
> >>> af9013: firmware version:4.65.0
> >> Use 4.95.0 instead.
> > 
> > How do I insert it correctly into the source tree? 
> > A short hint (to a readme) should help. 
> 
> Sorry, didn't understand what you mean.

I've downloaded the af9015 firmware version 4.95.0 from here:

http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/

but simply downloading and installing into /lib/firmware seems to be not enough here (Mandriva 2009.0).

> Anyhow, Mauro just committed this driver to the master, you can now use 

I did so, but firmware 4.95.0 is not included?!?

Thanks,

Stefan

Re: Driver for this DVB-T tuner?

[Antti Palosaari]

schollsky@arcor.de wrote:
> I've downloaded the af9015 firmware version 4.95.0 from here:
> 
> http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/

Thats ok

> but simply downloading and installing into /lib/firmware seems to be not enough here (Mandriva 2009.0).

?? How did you installed old 4.65.0 firmware? Just replace 4.65.0 
firmware file (file name is same) with 4.95.0 is enough.

>> Anyhow, Mauro just committed this driver to the master, you can now use 
> 
> I did so, but firmware 4.95.0 is not included?!?

Is not included? Firmware does not come with driver - it should be 
downloaded and installed separately.

What it now prints to the /var/log/messages ?

regards
Antti
-- 
http://palosaari.fi/

Re: Driver for this DVB-T tuner?

[schollsky]

Antti wrote:

> ?? How did you installed old 4.65.0 firmware? Just replace 4.65.0 
> firmware file (file name is same) with 4.95.0 is enough.
> 

I'm not fully sure, if I did it at all, it was from an old, unsuccessful attempt.
Tryed an "updatedb" as root and the only places where I could find it has the new
version. I'm suspecting it comes with standard kernel 2.6.27.10-1 on Mandriva, which
I'm using. Should I deactivate 9015 from standard kernel options?

Anyhow - is there no default place to store firmware when compiling a kernel or modules?

> What it now prints to the /var/log/messages ?

This is still as before:

Feb 10 20:10:44 localhost kernel: af9013: firmware version:4.65.0


Thanks for your help,

Stefan

Re: Driver for this DVB-T tuner?

[Antti Palosaari]

schollsky@arcor.de wrote:
> Feb 10 20:10:44 localhost kernel: af9013: firmware version:4.65.0

Still old firmware. What md5sum says?

[root@localhost ~]# md5sum /lib/firmware/dvb-usb-af9015.fw
dccbc92c9168cc629a88b34ee67ede7b  /lib/firmware/dvb-usb-af9015.fw

Antti
-- 
http://palosaari.fi/