public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: CityK <cityk@rogers.com>
To: Andreas <linuxdreas@dslextreme.com>
Cc: linux-media@vger.kernel.org
Subject: Re: PVR x50 corrupts ATSC 115 streams
Date: Wed, 18 Feb 2009 22:37:23 -0500	[thread overview]
Message-ID: <499CD3F3.9010803@rogers.com> (raw)
In-Reply-To: <200902180441.40316.linuxdreas@dslextreme.com>

Andreas wrote:
> Just to let you know that you're not alone:
> I had a simiilar problem with the combination of an AverMedia A180 and 
> two Asus Falcon (they use the ivtv drivers and firmware). Whenever one 
> of the Falcons was recording, I got blips and dropouts on the 
> AverMedia. I chalked it off to a flaky mainboard and seperated the 
> Falcons and the Avermedia in two different computers. A while later I 
> got a new mainboard and additional ATSC tuner cards. As long as I had 
> two of the ATSC tuner cards installed, the recordings were ok, except 
> for an occasional dropout. But when I put a third ATSC tuner in, the 
> recordings were barely watchable. After I put two ATSC tuners (2x 
> Avermedia A180) in a different computer, they *all* are recording 
> almost perfectly. Even a HVR-1600 card that I had dismissed as broken, 
> delivers very good recordings in the other computer.

It should be noted that a common element here in the two cases is the
Nxt2004 (demod for both the A180 and 11x cards).

  parent reply	other threads:[~2009-02-19  3:37 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-02-18 12:41 PVR x50 corrupts ATSC 115 streams Andreas
2009-02-18 15:39 ` David Engel
2009-02-19  3:37 ` CityK [this message]
2009-02-19 13:30   ` Andreas
  -- strict thread matches above, loose matches on Subject: below --
2009-02-17 15:53 David Engel
2009-02-17 16:05 ` Steven Toth
2009-02-17 20:17   ` David Engel
2009-02-17 20:29     ` Steven Toth
2009-02-17 20:56       ` David Engel
2009-02-17 21:05         ` Devin Heitmueller
2009-02-17 22:29           ` Steven Toth
2009-02-17 22:38             ` Devin Heitmueller
2009-02-18 15:16               ` Steven Toth
2009-02-19  2:11                 ` CityK
2009-02-19 15:26                   ` Steven Toth
2009-02-18  5:19       ` David Engel
2009-02-18  8:25         ` Rudy Zijlstra
2009-02-18 15:29           ` David Engel
2009-02-18 14:56         ` Steven Toth
2009-02-18 15:34           ` David Engel
2009-02-19 16:28             ` David Engel
2009-02-19 16:44               ` Steven Toth
2009-02-22 19:35               ` CityK
2009-02-23 18:39                 ` David Engel
2009-02-23 19:06                   ` Steven Toth
2009-02-23 20:10                     ` David Engel
2009-02-23 21:53                       ` Steven Toth
2009-02-23 22:03                         ` Devin Heitmueller
2009-02-23 22:48                           ` David Engel
2009-02-23 22:58                             ` Devin Heitmueller
2009-02-24  1:38                               ` pat-lkml
2009-02-24 16:40                               ` David Engel
2009-02-24  0:05                       ` Andy Walls
2009-08-07  2:50 ` David Engel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=499CD3F3.9010803@rogers.com \
    --to=cityk@rogers.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linuxdreas@dslextreme.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox