From: Thomas RENARD <threnard@gmail.com>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] Can I use AVerTV Volar Black HD (A850) with Linux ?
Date: Thu, 19 Feb 2009 20:29:57 +0100 [thread overview]
Message-ID: <499DB335.50807@laposte.net> (raw)
Hello,
I bought this USB card : AVerTV Volar Black HD (A850) -
http://www.avermedia.com/avertv/Product/ProductDetail.aspx?Id=460&tab=APDriver.
I don't find anything relevant about using this card on linux.
Can I use this card on Linux ? How ?
Here is some information :
thomas@trubuntu:~$ dmesg
[ 204.468031] usb 1-3: new full speed USB device using ohci_hcd and
address 11
[ 204.648022] usb 1-3: device descriptor read/64, error -62
[ 204.932027] usb 1-3: device descriptor read/64, error -62
[ 205.212025] usb 1-3: new full speed USB device using ohci_hcd and
address 12
[ 205.392026] usb 1-3: device descriptor read/64, error -62
[ 205.676267] usb 1-3: device descriptor read/64, error -62
[ 205.956026] usb 1-3: new full speed USB device using ohci_hcd and
address 13
[ 206.367700] usb 1-3: device not accepting address 13, error -62
[ 206.544046] usb 1-3: new full speed USB device using ohci_hcd and
address 14
[ 206.952015] usb 1-3: device not accepting address 14, error -62
[ 206.952696] hub 1-0:1.0: unable to enumerate USB device on port 3
[ 206.953461] ppdev0: registered pardevice
[ 207.000249] ppdev0: unregistered pardevice
[ 207.134128] ppdev0: registered pardevice
[ 207.180716] ppdev0: unregistered pardevice
[ 207.420177] ppdev0: registered pardevice
[ 207.468035] ppdev0: unregistered pardevice
[ 213.643907] type=1503 audit(1235066401.409:6):
operation="inode_permission" requested_mask="::x" denied_mask="::x"
fsuid=7 name="/usr/NX/bin/nxspool" pid=7880 profile="/usr/sbin/cupsd"
[ 681.700334] usb 3-6: new high speed USB device using ehci_hcd and
address 3
[ 681.889296] usb 3-6: configuration #1 chosen from 1 choice
[ 719.776030] usb 1-3: new full speed USB device using ohci_hcd and
address 15
[ 719.960026] usb 1-3: device descriptor read/64, error -62
[ 720.244031] usb 1-3: device descriptor read/64, error -62
[ 720.524031] usb 1-3: new full speed USB device using ohci_hcd and
address 16
[ 720.706552] usb 1-3: device descriptor read/64, error -62
[ 720.988024] usb 1-3: device descriptor read/64, error -62
[ 721.272059] usb 1-3: new full speed USB device using ohci_hcd and
address 17
[ 721.680021] usb 1-3: device not accepting address 17, error -62
[ 721.856043] usb 1-3: new full speed USB device using ohci_hcd and
address 18
[ 722.264442] usb 1-3: device not accepting address 18, error -62
[ 722.264790] hub 1-0:1.0: unable to enumerate USB device on port 3
--------------------------------------------------------------
thomas@trubuntu:~$ dmesg | grep dvb
thomas@trubuntu:~$
--------------------------------------------------------------
thomas@trubuntu:~$ lsusb -v
Bus 003 Device 003: ID 07ca:850a AVerMedia Technologies, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x07ca AVerMedia Technologies, Inc.
idProduct 0x850a
bcdDevice 1.01
iManufacturer 1 AVerMedia
iProduct 2 A850 DVBT
iSerial 3 301475201032000
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Thank you !
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next reply other threads:[~2009-02-19 19:30 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-19 19:29 Thomas RENARD [this message]
2009-02-19 20:15 ` [linux-dvb] Can I use AVerTV Volar Black HD (A850) with Linux ? Antti Palosaari
2009-02-20 21:56 ` Thomas RENARD
-- strict thread matches above, loose matches on Subject: below --
2009-02-21 1:07 Laurent Haond
2009-02-21 1:09 Laurent Haond
[not found] ` <7a3c9e3d0902210108w77e440e2u6d688f3614ccf972@mail.gmail.com>
2009-02-21 12:09 ` Laurent Haond
2009-02-21 16:38 ` Antti Palosaari
2009-02-22 13:53 ` Laurent Haond
2009-02-22 18:05 ` CityK
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=499DB335.50807@laposte.net \
--to=threnard@gmail.com \
--cc=linux-dvb@linuxtv.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox