From: Laurent Haond <lhaond@bearstech.com>
To: linux-media@vger.kernel.org
Subject: Re: [linux-dvb] Can I use AVerTV Volar Black HD (A850) with Linux ?
Date: Sat, 21 Feb 2009 13:09:46 +0100 [thread overview]
Message-ID: <499FEF0A.2070001@bearstech.com> (raw)
In-Reply-To: <7a3c9e3d0902210108w77e440e2u6d688f3614ccf972@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2776 bytes --]
Hi,
I enabled debug on dvb-usb, here you can find my dmesg output :
usb 4-3: new high speed USB device using ehci_hcd and address 12
usb 4-3: configuration #1 chosen from 1 choice
af9015_usb_probe: interface:0
af9015_read_config: IR mode:0
af9015_read_config: TS mode:1
af9015_read_config: [0] xtal:2 set adc_clock:28000
af9015_read_config: [0] IF1:36125
af9015_read_config: [0] MT2060 IF1:0
af9015_read_config: [0] tuner id:13
af9015_read_config: [1] xtal:2 set adc_clock:28000
af9015_read_config: [1] IF1:36125
af9015_read_config: [1] MT2060 IF1:1220
af9015_read_config: [1] tuner id:130
af9015_identify_state: reply:01
dvb-usb: found a 'AVerMedia A850' in cold state, will try to load a firmware
firmware: requesting dvb-usb-af9015.fw
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
af9015_download_firmware:
dvb-usb: found a 'AVerMedia A850' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (AVerMedia A850)
af9015_af9013_frontend_attach: init I2C
af9015_i2c_init:
00: 2c 85 a3 0b 00 00 00 00 ca 07 0a 85 01 01 01 02
10: 03 80 00 fa fa 10 40 ef 00 30 31 30 31 30 37 30
20: 33 30 37 30 30 30 30 31 ff ff ff ff ff ff ff ff
30: 01 01 38 01 00 08 02 01 1d 8d 00 00 0d ff ff ff
40: ff ff ff ff ff 08 02 00 1d 8d c4 04 82 ff ff ff
50: ff ff ff ff ff 26 00 00 04 03 09 04 14 03 41 00
60: 56 00 65 00 72 00 4d 00 65 00 64 00 69 00 61 00
70: 14 03 41 00 38 00 35 00 30 00 20 00 44 00 56 00
80: 42 00 54 00 20 03 33 00 30 00 31 00 34 00 37 00
90: 35 00 33 00 30 00 31 00 32 00 34 00 30 00 30 00
a0: 30 00 30 00 00 ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
af9013: firmware version:4.95.0
DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
af9015_tuner_attach:
MXL5005S: Attached at address 0xc6
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (AVerMedia A850)
af9015_copy_firmware:
af9015: command failed:2
af9015: firmware copy to 2nd frontend failed, will disable it
dvb-usb: no frontend was attached by 'AVerMedia A850'
dvb-usb: AVerMedia A850 successfully initialized and connected.
af9015_init:
af9015_init_endpoint: USB speed:3
af9015_download_ir_table:
dvbscan fails with this error : Unable to query frontend status
and sometimes (not everytimes) dmesg shows :
af9015: recv bulk message failed:-110
af9013: I2C read failed reg:d417
Tried Kaffeine, did not work either...
Laurent
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
next prev parent reply other threads:[~2009-02-21 12:09 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-21 1:09 [linux-dvb] Can I use AVerTV Volar Black HD (A850) with Linux ? Laurent Haond
[not found] ` <7a3c9e3d0902210108w77e440e2u6d688f3614ccf972@mail.gmail.com>
2009-02-21 12:09 ` Laurent Haond [this message]
2009-02-21 16:38 ` Antti Palosaari
2009-02-22 13:53 ` Laurent Haond
2009-02-22 18:05 ` CityK
-- strict thread matches above, loose matches on Subject: below --
2009-02-21 1:07 Laurent Haond
2009-02-19 19:29 Thomas RENARD
2009-02-19 20:15 ` Antti Palosaari
2009-02-20 21:56 ` Thomas RENARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=499FEF0A.2070001@bearstech.com \
--to=lhaond@bearstech.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox