From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from rupert.bearstech.com ([193.84.18.54]:47041 "EHLO rupert.bearstech.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751894AbZBUMJt (ORCPT ); Sat, 21 Feb 2009 07:09:49 -0500 Received: from localhost (localhost [127.0.0.1]) by rupert.bearstech.com (Postfix) with ESMTP id 3FB8610000C for ; Sat, 21 Feb 2009 13:09:47 +0100 (CET) Received: from rupert.bearstech.com ([127.0.0.1]) by localhost (rupert.bearstech.com [127.0.0.1]) (amavisd-new, port 10024) with LMTP id ovfepZP6Qfbk for ; Sat, 21 Feb 2009 13:09:47 +0100 (CET) Received: from [192.168.0.24] (beavis.scaryflop.com [82.67.15.220]) by rupert.bearstech.com (Postfix) with ESMTP id C8D2C10000A for ; Sat, 21 Feb 2009 13:09:46 +0100 (CET) Message-ID: <499FEF0A.2070001@bearstech.com> Date: Sat, 21 Feb 2009 13:09:46 +0100 From: Laurent Haond MIME-Version: 1.0 To: linux-media@vger.kernel.org Subject: Re: [linux-dvb] Can I use AVerTV Volar Black HD (A850) with Linux ? References: <499F5452.6050205@bearstech.com> <7a3c9e3d0902210108w77e440e2u6d688f3614ccf972@mail.gmail.com> In-Reply-To: <7a3c9e3d0902210108w77e440e2u6d688f3614ccf972@mail.gmail.com> Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="------------enig770BA8EE581BB6237FA5F339" Sender: linux-media-owner@vger.kernel.org List-ID: This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --------------enig770BA8EE581BB6237FA5F339 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Hi, I enabled debug on dvb-usb, here you can find my dmesg output : usb 4-3: new high speed USB device using ehci_hcd and address 12 usb 4-3: configuration #1 chosen from 1 choice af9015_usb_probe: interface:0 af9015_read_config: IR mode:0 af9015_read_config: TS mode:1 af9015_read_config: [0] xtal:2 set adc_clock:28000 af9015_read_config: [0] IF1:36125 af9015_read_config: [0] MT2060 IF1:0 af9015_read_config: [0] tuner id:13 af9015_read_config: [1] xtal:2 set adc_clock:28000 af9015_read_config: [1] IF1:36125 af9015_read_config: [1] MT2060 IF1:1220 af9015_read_config: [1] tuner id:130 af9015_identify_state: reply:01 dvb-usb: found a 'AVerMedia A850' in cold state, will try to load a firmw= are firmware: requesting dvb-usb-af9015.fw dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw' af9015_download_firmware: dvb-usb: found a 'AVerMedia A850' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (AVerMedia A850) af9015_af9013_frontend_attach: init I2C af9015_i2c_init: 00: 2c 85 a3 0b 00 00 00 00 ca 07 0a 85 01 01 01 02 10: 03 80 00 fa fa 10 40 ef 00 30 31 30 31 30 37 30 20: 33 30 37 30 30 30 30 31 ff ff ff ff ff ff ff ff 30: 01 01 38 01 00 08 02 01 1d 8d 00 00 0d ff ff ff 40: ff ff ff ff ff 08 02 00 1d 8d c4 04 82 ff ff ff 50: ff ff ff ff ff 26 00 00 04 03 09 04 14 03 41 00 60: 56 00 65 00 72 00 4d 00 65 00 64 00 69 00 61 00 70: 14 03 41 00 38 00 35 00 30 00 20 00 44 00 56 00 80: 42 00 54 00 20 03 33 00 30 00 31 00 34 00 37 00 90: 35 00 33 00 30 00 31 00 32 00 34 00 30 00 30 00 a0: 30 00 30 00 00 ff ff ff ff ff ff ff ff ff ff ff b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff af9013: firmware version:4.95.0 DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)... af9015_tuner_attach: MXL5005S: Attached at address 0xc6 dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (AVerMedia A850) af9015_copy_firmware: af9015: command failed:2 af9015: firmware copy to 2nd frontend failed, will disable it dvb-usb: no frontend was attached by 'AVerMedia A850' dvb-usb: AVerMedia A850 successfully initialized and connected. af9015_init: af9015_init_endpoint: USB speed:3 af9015_download_ir_table: dvbscan fails with this error : Unable to query frontend status and sometimes (not everytimes) dmesg shows : af9015: recv bulk message failed:-110 af9013: I2C read failed reg:d417 Tried Kaffeine, did not work either... Laurent --------------enig770BA8EE581BB6237FA5F339 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: OpenPGP digital signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) iEYEARECAAYFAkmf7woACgkQ2KAAfsBqikPEGwCgppYVVdDRVFIWt/3+B1QbgkOj UywAnRX87nOGZX9u6yvWjtoebjKByEQa =3ARB -----END PGP SIGNATURE----- --------------enig770BA8EE581BB6237FA5F339--