* [linux-dvb] Using tm6010 for Haupauge WinTV-HVR 900H
@ 2009-03-01 16:36 David Woitkowski
2009-03-01 21:16 ` WinTV HVR-1800 analog Satus Dustin Coates
0 siblings, 1 reply; 8+ messages in thread
From: David Woitkowski @ 2009-03-01 16:36 UTC (permalink / raw)
To: linux-dvb
Hi out there
I'm in the unfortunate position of having bought a 900H instead of a 900
and now I'm fiddling with the driver.
Details:
$ lsusb | grep Hauppauge
Bus 008 Device 004: ID 2040:6600 Hauppauge
My machine is running Ubuntu 8.10 with a 2.6.27-11-generic kernel. The
correct kernel-headers are installed.
As far as I've read there is (limited) support for the device with the
tm6010 driver. Putting together some info from the web I did the following:
$ hg clone http://linuxtv.org/hg/v4l-dvb
$ cd v4l-dvb
$ hg pull -u http://linuxtv.org/hg/~mchehab/tm6010
Inserted into v4l-dvb/v4l/.config three lines:
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_DVB=m
$ hg merge
$ make
and as root:
# make install
This far everything worked without error.
Then I got the Firmware the card was requesting in the dmesg-output from
http://steventoth.net/linux/hvr1400/xc3028L-v36.fw and copied it to /lib
/firmware
Since there is no Module tm6000 I did
# modprobe -v tm6000
insmod
/lib/modules/2.6.27-11-generic/kernel/drivers/media/video/videobuf-core.ko
insmod
/lib/modules/2.6.27-11-generic/kernel/drivers/media/video/videobuf-vmalloc.ko
insmod /lib/modules/2.6.27-11-generic/kernel/drivers/i2c/i2c-core.ko
insmod
/lib/modules/2.6.27-11-generic/kernel/drivers/media/video/tm6000/tm6000.ko
$ dmesg
[ 187.646908] tm6000 v4l2 driver version 0.0.1 loaded
[ 187.647898] usbcore: registered new interface driver tm6000
(tail /var/log/messages gives the same info)
Now - as I hope the module is loaded correctly - I attacht the USB-Device:
$ dmesg
[ 373.881042] usb 8-1: new high speed USB device using ehci_hcd and
address 3
[ 374.019648] usb 8-1: configuration #1 chosen from 1 choice
[ 374.023090] tm6000: alt 0, interface 0, class 255
[ 374.023102] tm6000: alt 0, interface 0, class 255
[ 374.023107] tm6000: Bulk IN endpoint: 0x82 (max size=512 bytes)
[ 374.023111] tm6000: alt 0, interface 0, class 255
[ 374.023116] tm6000: alt 1, interface 0, class 255
[ 374.023120] tm6000: ISOC IN endpoint: 0x81 (max size=3072 bytes)
[ 374.023125] tm6000: alt 1, interface 0, class 255
[ 374.023129] tm6000: alt 1, interface 0, class 255
[ 374.023133] tm6000: alt 2, interface 0, class 255
[ 374.023137] tm6000: alt 2, interface 0, class 255
[ 374.023141] tm6000: alt 2, interface 0, class 255
[ 374.023145] tm6000: alt 3, interface 0, class 255
[ 374.023149] tm6000: alt 3, interface 0, class 255
[ 374.023153] tm6000: alt 3, interface 0, class 255
[ 374.023158] tm6000: New video device @ 480 Mbps (2040:6600, ifnum 0)
[ 374.023162] tm6000: Found Hauppauge HVR-900H
[ 374.884058] Error -32 while retrieving board version
[ 375.184050] tm6000 #0: i2c eeprom 00: 01 59 54 45 12 01 00 02 00 00
00 40 40 20 00 66 .YTE.......@@ .f
[ 375.380112] tm6000 #0: i2c eeprom 10: 69 00 10 20 40 01 02 03 48 00
79 00 62 00 72 00 i.. @...H.y.b.r.
[ 375.572058] tm6000 #0: i2c eeprom 20: ff 00 64 ff ff ff ff ff ff ff
ff ff ff ff ff ff ..d.............
[ 375.764038] tm6000 #0: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ................
[ 375.956103] tm6000 #0: i2c eeprom 40: 10 03 48 00 56 00 52 00 39 00
30 00 30 00 48 00 ..H.V.R.9.0.0.H.
[ 376.148062] tm6000 #0: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ................
[ 376.344055] tm6000 #0: i2c eeprom 60: 30 ff ff ff 0f ff ff ff ff ff
0a 03 32 00 2e 00 0...........2...
[ 376.536039] tm6000 #0: i2c eeprom 70: 3f 00 ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ?...............
[ 376.728041] tm6000 #0: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ................
[ 376.920041] tm6000 #0: i2c eeprom 90: 35 ff ff ff 16 03 34 00 30 00
33 00 32 00 31 00 5.....4.0.3.2.1.
[ 377.112039] tm6000 #0: i2c eeprom a0: 33 00 35 00 33 00 39 00 39 00
00 00 00 00 ff ff 3.5.3.9.9.......
[ 377.308054] tm6000 #0: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ................
[ 377.500046] tm6000 #0: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ................
[ 377.692053] tm6000 #0: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ................
[ 377.885037] tm6000 #0: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ................
[ 378.076042] tm6000 #0: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ................
[ 378.260374] ................
[ 378.260531] Trident TVMaster TM5600/TM6000 USB2 board (Load status: 0)
[ 378.320709] Hack: enabling device at addr 0xc2
[ 378.320722] tuner' 0-0061: chip found @ 0xc2 (tm6000 #0)
[ 378.362555] xc2028 0-0061: creating new instance
[ 378.362566] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[ 378.362817] Setting firmware parameters for xc2028
[ 378.362834] firmware: requesting xc3028L-v36.fw
[ 378.395756] xc2028 0-0061: Loading 81 firmware images from
xc3028L-v36.fw, type: xc2028 firmware, ver 3.6
[ 378.692036] xc2028 0-0061: Loading firmware for type=BASE MTS (5), id
0000000000000000.
The device itself does not show any affection (LEDs stay dark), there is
no directory /dev/dvb created and MeTV tells me it's not finding any
reciever.
What am I missing? Did I oversee anything conserning the
driver-compilation? Or am I using the wrong firmware?
Comments appreciated,
David
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 8+ messages in thread
* WinTV HVR-1800 analog Satus
2009-03-01 16:36 [linux-dvb] Using tm6010 for Haupauge WinTV-HVR 900H David Woitkowski
@ 2009-03-01 21:16 ` Dustin Coates
2009-03-02 17:17 ` [linux-dvb] " Steven Toth
0 siblings, 1 reply; 8+ messages in thread
From: Dustin Coates @ 2009-03-01 21:16 UTC (permalink / raw)
To: linux-media@vger.kernel.org; +Cc: linux-dvb@linuxtv.org
Any update on the status of analouge for this card? I really would
like to switch back to Linux as my mce solution, but last time I did,
the analouge was terrible, and I was getting no answers on the list...
Thanks,
Dustin Coates
Sent from my iPhone
On Mar 1, 2009, at 10:36 AM, David Woitkowski <jarrn@campus.upb.de>
wrote:
> Hi out there
>
> I'm in the unfortunate position of having bought a 900H instead of a
> 900
> and now I'm fiddling with the driver.
>
> Details:
> $ lsusb | grep Hauppauge
> Bus 008 Device 004: ID 2040:6600 Hauppauge
>
> My machine is running Ubuntu 8.10 with a 2.6.27-11-generic kernel. The
> correct kernel-headers are installed.
>
> As far as I've read there is (limited) support for the device with the
> tm6010 driver. Putting together some info from the web I did the
> following:
>
> $ hg clone http://linuxtv.org/hg/v4l-dvb
> $ cd v4l-dvb
> $ hg pull -u http://linuxtv.org/hg/~mchehab/tm6010
>
> Inserted into v4l-dvb/v4l/.config three lines:
> CONFIG_VIDEO_TM6000_ALSA=m
> CONFIG_VIDEO_TM6000=m
> CONFIG_VIDEO_TM6000_DVB=m
>
> $ hg merge
> $ make
>
> and as root:
> # make install
>
> This far everything worked without error.
>
> Then I got the Firmware the card was requesting in the dmesg-output
> from
> http://steventoth.net/linux/hvr1400/xc3028L-v36.fw and copied it to /
> lib
> /firmware
>
> Since there is no Module tm6000 I did
> # modprobe -v tm6000
> insmod
> /lib/modules/2.6.27-11-generic/kernel/drivers/media/video/videobuf-
> core.ko
> insmod
> /lib/modules/2.6.27-11-generic/kernel/drivers/media/video/videobuf-
> vmalloc.ko
>
> insmod /lib/modules/2.6.27-11-generic/kernel/drivers/i2c/i2c-core.ko
> insmod
> /lib/modules/2.6.27-11-generic/kernel/drivers/media/video/tm6000/
> tm6000.ko
>
> $ dmesg
> [ 187.646908] tm6000 v4l2 driver version 0.0.1 loaded
> [ 187.647898] usbcore: registered new interface driver tm6000
>
> (tail /var/log/messages gives the same info)
>
> Now - as I hope the module is loaded correctly - I attacht the USB-
> Device:
>
> $ dmesg
> [ 373.881042] usb 8-1: new high speed USB device using ehci_hcd and
> address 3
> [ 374.019648] usb 8-1: configuration #1 chosen from 1 choice
> [ 374.023090] tm6000: alt 0, interface 0, class 255
> [ 374.023102] tm6000: alt 0, interface 0, class 255
> [ 374.023107] tm6000: Bulk IN endpoint: 0x82 (max size=512 bytes)
> [ 374.023111] tm6000: alt 0, interface 0, class 255
> [ 374.023116] tm6000: alt 1, interface 0, class 255
> [ 374.023120] tm6000: ISOC IN endpoint: 0x81 (max size=3072 bytes)
> [ 374.023125] tm6000: alt 1, interface 0, class 255
> [ 374.023129] tm6000: alt 1, interface 0, class 255
> [ 374.023133] tm6000: alt 2, interface 0, class 255
> [ 374.023137] tm6000: alt 2, interface 0, class 255
> [ 374.023141] tm6000: alt 2, interface 0, class 255
> [ 374.023145] tm6000: alt 3, interface 0, class 255
> [ 374.023149] tm6000: alt 3, interface 0, class 255
> [ 374.023153] tm6000: alt 3, interface 0, class 255
> [ 374.023158] tm6000: New video device @ 480 Mbps (2040:6600, ifnum
> 0)
> [ 374.023162] tm6000: Found Hauppauge HVR-900H
> [ 374.884058] Error -32 while retrieving board version
> [ 375.184050] tm6000 #0: i2c eeprom 00: 01 59 54 45 12 01 00 02 00 00
> 00 40 40 20 00 66 .YTE.......@@ .f
> [ 375.380112] tm6000 #0: i2c eeprom 10: 69 00 10 20 40 01 02 03 48 00
> 79 00 62 00 72 00 i.. @...H.y.b.r.
> [ 375.572058] tm6000 #0: i2c eeprom 20: ff 00 64 ff ff ff ff ff ff ff
> ff ff ff ff ff ff ..d.............
> [ 375.764038] tm6000 #0: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff ................
> [ 375.956103] tm6000 #0: i2c eeprom 40: 10 03 48 00 56 00 52 00 39 00
> 30 00 30 00 48 00 ..H.V.R.9.0.0.H.
> [ 376.148062] tm6000 #0: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff ................
> [ 376.344055] tm6000 #0: i2c eeprom 60: 30 ff ff ff 0f ff ff ff ff ff
> 0a 03 32 00 2e 00 0...........2...
> [ 376.536039] tm6000 #0: i2c eeprom 70: 3f 00 ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff ?...............
> [ 376.728041] tm6000 #0: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff ................
> [ 376.920041] tm6000 #0: i2c eeprom 90: 35 ff ff ff 16 03 34 00 30 00
> 33 00 32 00 31 00 5.....4.0.3.2.1.
> [ 377.112039] tm6000 #0: i2c eeprom a0: 33 00 35 00 33 00 39 00 39 00
> 00 00 00 00 ff ff 3.5.3.9.9.......
> [ 377.308054] tm6000 #0: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff ................
> [ 377.500046] tm6000 #0: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff ................
> [ 377.692053] tm6000 #0: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff ................
> [ 377.885037] tm6000 #0: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff ................
> [ 378.076042] tm6000 #0: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff ................
> [ 378.260374] ................
> [ 378.260531] Trident TVMaster TM5600/TM6000 USB2 board (Load
> status: 0)
> [ 378.320709] Hack: enabling device at addr 0xc2
> [ 378.320722] tuner' 0-0061: chip found @ 0xc2 (tm6000 #0)
> [ 378.362555] xc2028 0-0061: creating new instance
> [ 378.362566] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
> [ 378.362817] Setting firmware parameters for xc2028
> [ 378.362834] firmware: requesting xc3028L-v36.fw
> [ 378.395756] xc2028 0-0061: Loading 81 firmware images from
> xc3028L-v36.fw, type: xc2028 firmware, ver 3.6
> [ 378.692036] xc2028 0-0061: Loading firmware for type=BASE MTS
> (5), id
> 0000000000000000.
>
>
> The device itself does not show any affection (LEDs stay dark),
> there is
> no directory /dev/dvb created and MeTV tells me it's not finding any
> reciever.
>
> What am I missing? Did I oversee anything conserning the
> driver-compilation? Or am I using the wrong firmware?
>
> Comments appreciated,
> David
>
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux-
> media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [linux-dvb] WinTV HVR-1800 analog Satus
2009-03-01 21:16 ` WinTV HVR-1800 analog Satus Dustin Coates
@ 2009-03-02 17:17 ` Steven Toth
2009-03-02 21:33 ` JJ
0 siblings, 1 reply; 8+ messages in thread
From: Steven Toth @ 2009-03-02 17:17 UTC (permalink / raw)
To: linux-media; +Cc: linux-dvb@linuxtv.org
Dustin Coates wrote:
> Any update on the status of analouge for this card? I really would
> like to switch back to Linux as my mce solution, but last time I did,
> the analouge was terrible, and I was getting no answers on the list...
Last I checked it worked fine for me.
- Steve
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [linux-dvb] WinTV HVR-1800 analog Satus
2009-03-02 17:17 ` [linux-dvb] " Steven Toth
@ 2009-03-02 21:33 ` JJ
0 siblings, 0 replies; 8+ messages in thread
From: JJ @ 2009-03-02 21:33 UTC (permalink / raw)
To: linux-media
Steven Toth wrote:
> Dustin Coates wrote:
>
>> Any update on the status of analouge for this card? I really would
>> like to switch back to Linux as my mce solution, but last time I did,
>> the analouge was terrible, and I was getting no answers on the list...
>>
>
> Last I checked it worked fine for me.
>
> - Steve
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux-media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
>
not working here either...works very occasionally:
[19004.286089] tuner' 4-0042: chip found @ 0x84 (cx23885[0])
[19004.321897] tda829x 4-0042: could not clearly identify tuner address,
defaulting to 60
[19004.379168] tda18271 4-0060: creating new instance
[19004.413360] TDA18271HD/C1 detected @ 4-0060
[19005.580369] tda829x 4-0042: type set to tda8295+18271
[19828.639583] Firmware and/or mailbox pointer not initialized or
corrupted, signature = 0x7bfeffff, cmd = STOP_CAPTURE
[19829.749376] Firmware and/or mailbox pointer not initialized or
corrupted, signature = 0x7bfeffff, cmd = PING_FW
[19829.749445] firmware: requesting v4l-cx23885-enc.fw
[19926.468016] ERROR: API Mailbox timeout
[19927.540420] ERROR: Mailbox appears to be in use (3), cmd = PING_FW
[19927.540487] firmware: requesting v4l-cx23885-enc.fw
[20011.373363] tda18271_calc_bp_filter: error -34 on line 567
[20011.600033] tda18271_calc_km: error -34 on line 584
[20011.637355] tda18271_calc_rf_band: error -34 on line 601
[20011.637365] tda18271_calc_gain_taper: error -34 on line 618
[20012.076367] tda18271_calc_ir_measure: error -34 on line 635
[20012.076376] tda18271_calc_bp_filter: error -34 on line 567
[20012.076380] tda18271_calc_rf_band: error -34 on line 601
[20012.076385] tda18271_calc_gain_taper: error -34 on line 618
[20013.681363] tda18271_calc_bp_filter: error -34 on line 567
[20013.908029] tda18271_calc_km: error -34 on line 584
[20013.944363] tda18271_calc_rf_band: error -34 on line 601
[20013.944373] tda18271_calc_gain_taper: error -34 on line 618
[20014.384363] tda18271_calc_ir_measure: error -34 on line 635
[20014.384372] tda18271_calc_bp_filter: error -34 on line 567
[20014.384376] tda18271_calc_rf_band: error -34 on line 601
[20014.384381] tda18271_calc_gain_taper: error -34 on line 618
[20015.984374] tda18271_calc_bp_filter: error -34 on line 567
[20016.212029] tda18271_calc_km: error -34 on line 584
[20016.248369] tda18271_calc_rf_band: error -34 on line 601
[20016.248379] tda18271_calc_gain_taper: error -34 on line 618
[20016.688363] tda18271_calc_ir_measure: error -34 on line 635
[20016.688372] tda18271_calc_bp_filter: error -34 on line 567
[20016.688376] tda18271_calc_rf_band: error -34 on line 601
[20016.688380] tda18271_calc_gain_taper: error -34 on line 618
[20018.289362] tda18271_calc_bp_filter: error -34 on line 567
[20018.516033] tda18271_calc_km: error -34 on line 584
[20018.553355] tda18271_calc_rf_band: error -34 on line 601
[20018.553364] tda18271_calc_gain_taper: error -34 on line 618
[20018.992373] tda18271_calc_ir_measure: error -34 on line 635
[20018.992381] tda18271_calc_bp_filter: error -34 on line 567
[20018.992386] tda18271_calc_rf_band: error -34 on line 601
[20018.992392] tda18271_calc_gain_taper: error -34 on line 618
^ permalink raw reply [flat|nested] 8+ messages in thread
* [linux-dvb] WinTV HVR-1800 analog Satus
@ 2009-03-03 1:10 Killero SS
2009-03-03 22:51 ` Steven Toth
0 siblings, 1 reply; 8+ messages in thread
From: Killero SS @ 2009-03-03 1:10 UTC (permalink / raw)
To: linux-dvb
Hello Steve
would you mind to post most info, on how you get it working?
i have this card for 6 months now, and i get not sound, and colors on tvtime looks pretty bad
im using ubuntu 8.10 2.6.27-9-generic, with dvb from hg
btw im using svideo input and rca audio
any help would be appreciated
thanks
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [linux-dvb] WinTV HVR-1800 analog Satus
2009-03-03 1:10 Killero SS
@ 2009-03-03 22:51 ` Steven Toth
0 siblings, 0 replies; 8+ messages in thread
From: Steven Toth @ 2009-03-03 22:51 UTC (permalink / raw)
To: killero_24; +Cc: linux-dvb
Killero SS wrote:
> Hello Steve
>
> would you mind to post most info, on how you get it working?
> i have this card for 6 months now, and i get not sound, and colors on tvtime looks pretty bad
> im using ubuntu 8.10 2.6.27-9-generic, with dvb from hg
>
> btw im using svideo input and rca audio
>
> any help would be appreciated
Last I checked tvtime worked well (but lacked audio) and cat'ing /dev/video1
would producing good looking mpeg2 files (with sound).
- Steve
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <mailman.1.1236078001.32084.linux-dvb@linuxtv.org>]
* Re: [linux-dvb] WinTV HVR-1800 analog Satus
[not found] <mailman.1.1236078001.32084.linux-dvb@linuxtv.org>
@ 2009-03-03 15:03 ` Matt Garretson
2009-03-03 15:11 ` JJ
0 siblings, 1 reply; 8+ messages in thread
From: Matt Garretson @ 2009-03-03 15:03 UTC (permalink / raw)
To: linux-dvb
Steven Toth wrote:
> Dustin Coates wrote:
> > Any update on the status of analouge for this card? I really would
>
> Last I checked it worked fine for me.
Does anyone have an HVR-1800 (digital or analog) coexisting with a
PVR-250? Mythtv-setup crashes for me when scanning ATSC/QAM channels
on the HVR-1800. Admittedly, I haven't tried to debug it beyond that.
But I'm just wondering if these IVTV and DVB devices can coexist at
all.
Also, does the 2.6.27 kernel have recent enough v4l/dvb stuff for the
HVR-1800 merged in, or should I still be pulling from the linuxtv
repository?
Thanks...
-Matt
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [linux-dvb] WinTV HVR-1800 analog Satus
2009-03-03 15:03 ` Matt Garretson
@ 2009-03-03 15:11 ` JJ
0 siblings, 0 replies; 8+ messages in thread
From: JJ @ 2009-03-03 15:11 UTC (permalink / raw)
To: linux-media
Matt Garretson wrote:
> Steven Toth wrote:
>
>> Dustin Coates wrote:
>>
>>> Any update on the status of analouge for this card? I really would
>>>
>> Last I checked it worked fine for me.
>>
>
>
>
> Does anyone have an HVR-1800 (digital or analog) coexisting with a
> PVR-250? Mythtv-setup crashes for me when scanning ATSC/QAM channels
> on the HVR-1800. Admittedly, I haven't tried to debug it beyond that.
> But I'm just wondering if these IVTV and DVB devices can coexist at
> all.
>
> Also, does the 2.6.27 kernel have recent enough v4l/dvb stuff for the
> HVR-1800 merged in, or should I still be pulling from the linuxtv
> repository?
>
> Thanks...
> -Matt
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux-media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
>
QAM-Cable scans fine with my mythtv-21-fixes, co-existing with my
Twinhan 1020 DVB-S...just my analogue support not working...ubuntu 8.10
64-bit stock kernel
JJ
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2009-03-03 22:52 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-03-01 16:36 [linux-dvb] Using tm6010 for Haupauge WinTV-HVR 900H David Woitkowski
2009-03-01 21:16 ` WinTV HVR-1800 analog Satus Dustin Coates
2009-03-02 17:17 ` [linux-dvb] " Steven Toth
2009-03-02 21:33 ` JJ
-- strict thread matches above, loose matches on Subject: below --
2009-03-03 1:10 Killero SS
2009-03-03 22:51 ` Steven Toth
[not found] <mailman.1.1236078001.32084.linux-dvb@linuxtv.org>
2009-03-03 15:03 ` Matt Garretson
2009-03-03 15:11 ` JJ
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox