Re: [linux-dvb] WinTV HVR-1800 analog Satus

Re: [linux-dvb] WinTV HVR-1800 analog Satus

[Steven Toth]

Dustin Coates wrote:
> Any update on the status of analouge for this card? I really would  
> like to switch back to Linux as my mce solution, but last time I did,  
> the analouge was terrible, and I was getting no answers on the list...

Last I checked it worked fine for me.

- Steve

Re: [linux-dvb] WinTV HVR-1800 analog Satus

[JJ]

Steven Toth wrote:
> Dustin Coates wrote:
>   
>> Any update on the status of analouge for this card? I really would  
>> like to switch back to Linux as my mce solution, but last time I did,  
>> the analouge was terrible, and I was getting no answers on the list...
>>     
>
> Last I checked it worked fine for me.
>
> - Steve
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux-media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
>   
not working here either...works very occasionally:


[19004.286089] tuner' 4-0042: chip found @ 0x84 (cx23885[0])
[19004.321897] tda829x 4-0042: could not clearly identify tuner address, 
defaulting to 60
[19004.379168] tda18271 4-0060: creating new instance
[19004.413360] TDA18271HD/C1 detected @ 4-0060
[19005.580369] tda829x 4-0042: type set to tda8295+18271
[19828.639583] Firmware and/or mailbox pointer not initialized or 
corrupted, signature = 0x7bfeffff, cmd = STOP_CAPTURE
[19829.749376] Firmware and/or mailbox pointer not initialized or 
corrupted, signature = 0x7bfeffff, cmd = PING_FW
[19829.749445] firmware: requesting v4l-cx23885-enc.fw
[19926.468016] ERROR: API Mailbox timeout
[19927.540420] ERROR: Mailbox appears to be in use (3), cmd = PING_FW
[19927.540487] firmware: requesting v4l-cx23885-enc.fw
[20011.373363] tda18271_calc_bp_filter: error -34 on line 567
[20011.600033] tda18271_calc_km: error -34 on line 584
[20011.637355] tda18271_calc_rf_band: error -34 on line 601
[20011.637365] tda18271_calc_gain_taper: error -34 on line 618
[20012.076367] tda18271_calc_ir_measure: error -34 on line 635
[20012.076376] tda18271_calc_bp_filter: error -34 on line 567
[20012.076380] tda18271_calc_rf_band: error -34 on line 601
[20012.076385] tda18271_calc_gain_taper: error -34 on line 618
[20013.681363] tda18271_calc_bp_filter: error -34 on line 567
[20013.908029] tda18271_calc_km: error -34 on line 584
[20013.944363] tda18271_calc_rf_band: error -34 on line 601
[20013.944373] tda18271_calc_gain_taper: error -34 on line 618
[20014.384363] tda18271_calc_ir_measure: error -34 on line 635
[20014.384372] tda18271_calc_bp_filter: error -34 on line 567
[20014.384376] tda18271_calc_rf_band: error -34 on line 601
[20014.384381] tda18271_calc_gain_taper: error -34 on line 618
[20015.984374] tda18271_calc_bp_filter: error -34 on line 567
[20016.212029] tda18271_calc_km: error -34 on line 584
[20016.248369] tda18271_calc_rf_band: error -34 on line 601
[20016.248379] tda18271_calc_gain_taper: error -34 on line 618
[20016.688363] tda18271_calc_ir_measure: error -34 on line 635
[20016.688372] tda18271_calc_bp_filter: error -34 on line 567
[20016.688376] tda18271_calc_rf_band: error -34 on line 601
[20016.688380] tda18271_calc_gain_taper: error -34 on line 618
[20018.289362] tda18271_calc_bp_filter: error -34 on line 567
[20018.516033] tda18271_calc_km: error -34 on line 584
[20018.553355] tda18271_calc_rf_band: error -34 on line 601
[20018.553364] tda18271_calc_gain_taper: error -34 on line 618
[20018.992373] tda18271_calc_ir_measure: error -34 on line 635
[20018.992381] tda18271_calc_bp_filter: error -34 on line 567
[20018.992386] tda18271_calc_rf_band: error -34 on line 601
[20018.992392] tda18271_calc_gain_taper: error -34 on line 618

[linux-dvb] WinTV HVR-1800 analog Satus

[Killero SS]

Hello Steve

would you mind to post most info, on how you get it working?
i have this card for 6 months now, and i get not sound, and colors on tvtime looks pretty bad
im using ubuntu 8.10 2.6.27-9-generic, with dvb from hg

btw im using svideo input and rca audio

any help would be appreciated

thanks


      


_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] WinTV HVR-1800 analog Satus

[Matt Garretson]

Steven Toth wrote:
> Dustin Coates wrote:
> > Any update on the status of analouge for this card? I really would  
> 
> Last I checked it worked fine for me.



Does anyone have an HVR-1800 (digital or analog) coexisting with a 
PVR-250?  Mythtv-setup crashes for me when scanning ATSC/QAM channels
on the HVR-1800.  Admittedly, I haven't tried to debug it beyond that.
But I'm just wondering if these IVTV and DVB devices can coexist at
all.

Also, does the 2.6.27 kernel have recent enough v4l/dvb stuff for the 
HVR-1800 merged in, or should I still be pulling from the linuxtv 
repository?

Thanks...
-Matt

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] WinTV HVR-1800 analog Satus

[JJ]

Matt Garretson wrote:
> Steven Toth wrote:
>   
>> Dustin Coates wrote:
>>     
>>> Any update on the status of analouge for this card? I really would  
>>>       
>> Last I checked it worked fine for me.
>>     
>
>
>
> Does anyone have an HVR-1800 (digital or analog) coexisting with a 
> PVR-250?  Mythtv-setup crashes for me when scanning ATSC/QAM channels
> on the HVR-1800.  Admittedly, I haven't tried to debug it beyond that.
> But I'm just wondering if these IVTV and DVB devices can coexist at
> all.
>
> Also, does the 2.6.27 kernel have recent enough v4l/dvb stuff for the 
> HVR-1800 merged in, or should I still be pulling from the linuxtv 
> repository?
>
> Thanks...
> -Matt
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux-media@vger.kernel.org
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
>   
QAM-Cable scans fine with my mythtv-21-fixes, co-existing with my 
Twinhan 1020 DVB-S...just my analogue support not working...ubuntu 8.10 
64-bit stock kernel
JJ

Re: [linux-dvb] WinTV HVR-1800 analog Satus

[Steven Toth]

Killero SS wrote:
> Hello Steve
> 
> would you mind to post most info, on how you get it working?
> i have this card for 6 months now, and i get not sound, and colors on tvtime looks pretty bad
> im using ubuntu 8.10 2.6.27-9-generic, with dvb from hg
> 
> btw im using svideo input and rca audio
> 
> any help would be appreciated

Last I checked tvtime worked well (but lacked audio) and cat'ing /dev/video1 
would producing good looking mpeg2 files (with sound).

- Steve

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb