From: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
To: "Weng, Wending" <WWeng@rheinmetall.ca>
Cc: linux-media@vger.kernel.org, "Aguirre Rodriguez,
Sergio Alberto" <saaguirre@ti.com>
Subject: Re: need help for omap3 isp-camera interface
Date: Tue, 21 Apr 2009 16:48:15 +0300 [thread overview]
Message-ID: <49EDCE9F.2030700@maxwell.research.nokia.com> (raw)
In-Reply-To: <C01FCF206F5D8D4C89B210408D7DB39C29B6BA@mail2.oerlikon.ca>
Weng, Wending wrote:
> Hi All,
>
> I'm working on video image capture(omap3 isp) interface(PSP 1.0.2),
> and have met many difficulties. At the camera side, the 8 bits BT656
> signal are connected to cam_d[0-7], which looks OK. The cam_fld,
> cam_hs and cam_vs are also connected, At the omap3 side, I use
> saMmapLoopback.c, it runs, however, it receives only HS_VS_IRQ, but
> no any image data. I checked FLDSTAT(CCDC_SYN_MODE), it's never
> changed. Right now, I don't know what to check, if you can give some
> suggestions, your help will be greatly appreciated. Thanks in
> advance.
I haven't been using the parallel interface nor I know anyone else who
would have. Sergio, any idea?
Anyway, this sounds like a problem in the parallel receiver side. You
could try also configuring the VD1 IRQ to happen much earlier, say on
10th line. See ISPCCDC_VDINT handling in ispccdc.c.
I'm going to update the patchset as soon as I get linux-omap booting again.
--
Sakari Ailus
sakari.ailus@maxwell.research.nokia.com
prev parent reply other threads:[~2009-04-21 13:48 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-21 3:01 need help for omap3 isp-camera interface Weng, Wending
2009-04-21 4:08 ` Dongsoo, Nathaniel Kim
2009-04-21 4:59 ` Hiremath, Vaibhav
2009-04-21 13:48 ` Sakari Ailus [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49EDCE9F.2030700@maxwell.research.nokia.com \
--to=sakari.ailus@maxwell.research.nokia.com \
--cc=WWeng@rheinmetall.ca \
--cc=linux-media@vger.kernel.org \
--cc=saaguirre@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox