From: Jelle de Jong <jelledejong@powercraft.nl>
To: video4linux-list@redhat.com
Subject: [not working] Conceptronic USB 2.0 Digital TV Receiver - CTVDIGRCU - Device Information
Date: Fri, 24 Apr 2009 11:43:24 +0200 [thread overview]
Message-ID: <49F189BC.5090606@powercraft.nl> (raw)
[-- Attachment #1: Type: text/plain, Size: 580 bytes --]
Hello everybody,
Apparently I was feeling a bit masochistic today, because I bought a new
usb dvb-t device with the hope it would work on my 2.6.26 kernel because
the 2.6.29 is extreme instable and my Digittrade DVB-T USB Stick (Afatech
DVB-T) (af9015.fw) does not work with mplayer which is a requirement for me.
So I bought a Conceptronic USB 2.0 Digital TV Receiver - CTVDIGRCU, but
it does not work. Would somebody willing to get this device working? I
can sent the device to you if you like.
The device information is attached in this email.
Best regards,
Jelle de Jong
[-- Attachment #2: Conceptronic USB 2.0 Digital TV Receiver - CTVDIGRCU - Device Information - v0.1.1j.txt --]
[-- Type: text/plain, Size: 4397 bytes --]
# vendor product page:
http://www.conceptronic.net/site/desktopdefault.aspx?tabindex=1&tabid=242&cid=40&gid=4050&pid=CTVDIGRCU
# vendor driver page
http://www.conceptronic.net/site/desktopdefault.aspx?tabindex=0&tabid=420&pc=CTVDIGRCU
# codes on device:
080800257
CTVDIGRCU
VERSION 2.0
C08-080 USB 2.0 Digital TV Reciever
# version 3 driver contains the below, but the device is version 2.0
# and the v2.0 driver on the webise is in a .exe i cant extract.
Afa Technologies, Inc.
AF15BDA.DeviceDesc = "Conceptronic CTVDIGRCU V3.0"
AF15BDA.DeviceDesc1 = "DVB-T 385U"
AF15BDA.FriendlyName = "AF9015 BDA Filter"
# dutch shop to where to buy them:
http://www.informatique.nl/445144/conceptronic-tv/dvb-t-adapter-usb2.0.html
$ uname -a
Linux debian-eeepc 2.6.29-1-686 #1 SMP Fri Apr 17 14:35:16 UTC 2009 i686 GNU/Linux
$ dpkg -l | grep 2.6.29
ii linux-image-2.6.29-1-686 2.6.29-3 Linux 2.6.29 image on PPro/Celeron/PII/PIII/P4
ii linux-libc-dev 2.6.29-3 Linux support headers for userspace development
$dmesg
[ 45.948050] usb 1-2: new high speed USB device using ehci_hcd and address 5
[ 46.081920] usb 1-2: New USB device found, idVendor=14aa, idProduct=0160
[ 46.081927] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 46.081932] usb 1-2: Product: DTV Receiver
[ 46.081935] usb 1-2: Manufacturer: DTV Receiver
[ 46.081939] usb 1-2: SerialNumber: 0000000000065658
[ 46.082129] usb 1-2: configuration #1 chosen from 1 choice
------------------------------------------------------------------------
$ sudo lsusb -vvv -d 14aa:0160
Bus 001 Device 005: ID 14aa:0160 AVerMedia (again) or C&E
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x14aa AVerMedia (again) or C&E
idProduct 0x0160
bcdDevice 1.00
iManufacturer 1 DTV Receiver
iProduct 2 DTV Receiver
iSerial 3 0000000000065658
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 41
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 USB2.0-Bulk&Iso
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 5 Bulk-In, Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 6 Iso-In, Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03ac 1x 940 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 2
Device Status: 0x0000
(Bus Powered)
[-- Attachment #3: Type: text/plain, Size: 164 bytes --]
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
next reply other threads:[~2009-04-24 9:43 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-24 9:43 Jelle de Jong [this message]
2009-04-24 12:17 ` [not working] Conceptronic USB 2.0 Digital TV Receiver - CTVDIGRCU - Device Information Antti Palosaari
2009-04-24 12:22 ` Antti Palosaari
2009-04-24 12:25 ` Jelle de Jong
2009-04-24 13:10 ` Antti Palosaari
2009-04-25 7:52 ` Jelle de Jong
2009-04-25 8:25 ` Antti Palosaari
2009-04-25 8:40 ` Jelle de Jong
2009-04-25 8:44 ` Antti Palosaari
2009-04-25 8:47 ` Antti Palosaari
2009-04-25 8:48 ` Jelle de Jong
2009-05-23 15:36 ` Jelle de Jong
2009-06-05 15:21 ` Antti Palosaari
2009-06-05 16:03 ` Jelle de Jong
2009-06-05 17:09 ` Antti Palosaari
2009-06-05 17:20 ` Jan Hoogenraad
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49F189BC.5090606@powercraft.nl \
--to=jelledejong@powercraft.nl \
--cc=video4linux-list@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox